TT-Miner 2024.1.2 BLAKE3, KAWPOW, ETHASH, ETCHASH, EPIC, SHA512256D, SHA3D, ETI

[TrailingStop]

Version 2.1.5 is available.

The new release adresses some issues that have been reported in the last few days. On some systems the miner creates too much rejected shares. I redesigned some related parts of the miner and I thiunk that this issue is fixed now. TT-Miner should not give you too much rejected shares anymore. You can monitor if the new functions works. There are only two scenarios where a rejected share may happend. One this that the pool adjusts the difficulty at the same time as the miner send out a new solution, the other on is that the miner recieves a new job while it is sending a new solution to the pool. In both scenarios a rejected shar may happend. You can see if the difficulty is adjusted or if the pool sent a new job in the command window.

Stating with this new release TT-Miner can understand most of the used command line arguments. If you already use any miner it should be OK just to replace the program name an leave the remaining arguments as they are. If you have a combination that TT-Miner does not understand please let me know so that I can fix that.

In the case that TT-Miner crashes it creates now a so called crash-dump file in the directory in which TT-Miner was started. In this case a file named CrashDump.dmp is created. It should be really helpful to fix the bug if you could send me these file with Information of the version of TT-Miner and the pool you used. The file contains information at which location TT-Miner crashed. i can so try to understand what happened and fix the bug. If you want to leand more about the contant of this file please read this artivcle from MS: https://docs.microsoft.com/en-us/windows/desktop/dxtecharts/crash-dump-analysis

If you do benchmarking please do not compare minerside numbers, but use pool hashrates, shares or just monies to get a objective number.

Thanks and: Happy mining.

[cirlama]

Hi, I get this (v2.1.5, w10, latest driver, and latest CRT are installed):

Active algo: Unknown
Found one CUDA device
* #0 PCI 0:1    GeForce GTX 1080 Ti (6.1)       CoreClk 1683 MHz | MemClk 5200 MHz | 11264 MB | SM: 28

ID:0 - Primary pool:    zcoin-eu.mintpond.com:3000
                        Wallet: xxxx
                        Worker: 1080
No backup pool defined


23:39:46 Cannot load the algo dll (10)

command line is
TT-Miner.exe -A MTP-100 -P xxxx.1080@zcoin-eu.mintpond.com:3000

similar with MTP-92

[TrailingStop]

Hi cirlama,

can you please check that you got the subfolder 'Algos' out of the zip file? Your reports sounds to me that you got only the files out of the main folder and not the algo folder with it files.

Maybe the best is to download again and make sure that you extract all files & folders out of the zip file. The file for the cuda10 version of MTP is 'AlgoMTP.dll'. Make sure that is file exists in the algo folder.

Hope that helps? Let me know if that was the problem and if it works now.

Thx

[cirlama]

Thanks, too tired yesterday evening and brainless: yes I missed the the subfolder "algos" from the zip file....

1080ti: 3.4 MH/s miner side (core +110, mem +0, power 80%),
1070: 1.75 MH/s miner side (core +160, mem +0, power 80%), will see later on pool side

[gusknure]

Hi gusknure,


can you give me some more information please. Version, Algo, pool?


Also, if you have some space left on your HD you can create a logfile that conrains more information. To create that just add the option -logpool to the commandline. TT-Miner will then create a logfile with information of the communication with the pool that could be helpful.

Thanks.

Version - TT-Miner_2.1.4
Pool - mintpond.com
Algo - MTP
-logpool enabled
Switched on 2.1.5

[TrailingStop]

Hi gusknure,


can you give me some more information please. Version, Algo, pool?


Also, if you have some space left on your HD you can create a logfile that conrains more information. To create that just add the option -logpool to the commandline. TT-Miner will then create a logfile with information of the communication with the pool that could be helpful.

Thanks.

Version - TT-Miner_2.1.4
Pool - mintpond.com
Algo - MTP
-logpool enabled
Switched on 2.1.5

OK- let me know if you see that with 2.1.5 again.

[TrailingStop]

7% rejected share, TT-Miner 2.1.4, 1080ti, xzc.2miners.com:8080, ping 47ms, MTP-100 and MTP-92, XZC.
CryptoDredge 0.16 was also about 5%, and new 0.16.1 was 0.2% rejected.
Still write "Error(pool): Low difficulty share(23)"

15:59:30 Rig-Speed[2 min]: 26.385 MH/s [A7674:R622] Uptime: 1 05:21:45 LastShare: 00:00:01
15:59:31 Error(pool): Low difficulty share(23)
15:59:31 GPU[0]: **Rejected 0 ms. xzc.2miners.com:8080 [54.36.109.3]
15:59:35 Error(pool): Low difficulty share(23)
15:59:35 GPU[0]: **Rejected 0 ms. xzc.2miners.com:8080 [54.36.109.3]

No, it is not. Do you have more information for me so that I can found out what is going on?

Version of TT, Pool, Ping to pool, Algo, Coin?

Thanks,

Hi tristable,
could you test the new release (2.1.5)? Do you still see so many rejected shares?

[HonestAbeX1]

Hey, recently discovered your TTminer and now tinkering with version 0.2.15 mining with MTP algo.

One interesting thing running it on a rig with 4x 1080s is that I tried various settings to core and mem overclock, yet no matter what setting I use it seems to not have any effect on the hash rate.  I also ran eth-pill but that also seem to not have any effect for me either.

So observing this I even try weird combo of underclock both core -200 and mem -450, and still hashing at the same rate, almost like it runs at a predefined fixed setting on my 1080s.  Could this actually be the case?

Also, when it mines for Dev fee, does the miner ever display that it is doing so?  Not sure since I do not notice much.

BTW it looks like you put in a lot of hard work into developing and refining TTminer, and this latest version (for MTP) seems quite stable and problem free so far.  Kudos to you.

[TrailingStop]

Hey, recently discovered your TTminer and now tinkering with version 0.2.15 mining with MTP algo.

One interesting thing running it on a rig with 4x 1080s is that I tried various settings to core and mem overclock, yet no matter what setting I use it seems to not have any effect on the hash rate.  I also ran eth-pill but that also seem to not have any effect for me either.

So observing this I even try weird combo of underclock both core -200 and mem -450, and still hashing at the same rate, almost like it runs at a predefined fixed setting on my 1080s.  Could this actually be the case?

Also, when it mines for Dev fee, does the miner ever display that it is doing so?  Not sure since I do not notice much.

BTW it looks like you put in a lot of hard work into developing and refining TTminer, and this latest version (for MTP) seems quite stable and problem free so far.  Kudos to you.

Hi HonestAbeX1,

thanks a lot. I do not have a 1080, so I cannot say if modifying OC settings will do a lot. At least I sounds strange to me. I run a single 1070 on my dev box only. Power to 65 - everything else to 0. Maybe someone else who uses a 1080 with TT-Miner can help here please? For DevFee I connect to MintPond or 2miners - just the one which have a lower Ping rate. I do not show much of this because I thought it might irritate if you suddenly see the miner working on a different pool. It does show you when it switches to does Dev mining and when it switches back to regular work.
Hope this makes sense?

Thanks - and happy mining!

[gusknure]

Hi gusknure,


can you give me some more information please. Version, Algo, pool?


Also, if you have some space left on your HD you can create a logfile that conrains more information. To create that just add the option -logpool to the commandline. TT-Miner will then create a logfile with information of the communication with the pool that could be helpful.

Thanks.

Version - TT-Miner_2.1.4
Pool - mintpond.com
Algo - MTP
-logpool enabled
Switched on 2.1.5

OK- let me know if you see that with 2.1.5 again.

Hi.
2.1.5 freeze more frequently
please see a log, maybe you can help...
https://erecruit365-my.sharepoint.com/:u:/g/personal/vbulakh_erecruit_com/EZmeweIXR_RJk3nDvPIBEp0BtZgwJ_ow2OdWLHTuSRL-Gg?e=RRHn6F

[UselessGuru]

Hi,

today TT-Miner support 'miner_getstat1' JSON request only. Will add more functions if required. What are you locking for? More details on the protocol or the miner_getstat1 command? Let me know if you need more functions.

I am about to integrate your miner into www.multipoolminer.io.

Can give me an example in powershell how to read the stats? Thank you!

Any news?

[TrailingStop]

Hi,

today TT-Miner support 'miner_getstat1' JSON request only. Will add more functions if required. What are you locking for? More details on the protocol or the miner_getstat1 command? Let me know if you need more functions.

I am about to integrate your miner into www.multipoolminer.io.

Can give me an example in powershell how to read the stats? Thank you!

Any news?

Sent you a PM.

[MinerMonitoring]

TT-Miner support added to EthMonitoring v1.05 (https://github.com/JamesSmith2/EthMonitoring/releases)

MinerMonitoring.com TT-Miner chat @discord: https://discord.gg/hyzUMT

[tristable]

7% rejected share, TT-Miner 2.1.4, 1080ti, xzc.2miners.com:8080, ping 47ms, MTP-100 and MTP-92, XZC.
CryptoDredge 0.16 was also about 5%, and new 0.16.1 was 0.2% rejected.
Still write "Error(pool): Low difficulty share(23)"

15:59:30 Rig-Speed[2 min]: 26.385 MH/s [A7674:R622] Uptime: 1 05:21:45 LastShare: 00:00:01
15:59:31 Error(pool): Low difficulty share(23)
15:59:31 GPU[0]: **Rejected 0 ms. xzc.2miners.com:8080 [54.36.109.3]
15:59:35 Error(pool): Low difficulty share(23)
15:59:35 GPU[0]: **Rejected 0 ms. xzc.2miners.com:8080 [54.36.109.3]

No, it is not. Do you have more information for me so that I can found out what is going on?

Version of TT, Pool, Ping to pool, Algo, Coin?

Thanks,

Hi tristable,
could you test the new release (2.1.5)? Do you still see so many rejected shares?

Hi TrailingStop!
Yes thanks, I tested the new version, everything is fine, rejected shares missing.

[Master Chief]

you can add either -d 2 3 4 or --cuda-devices 2 3 4 like this sample:

Hi TrailingStop!
Does the miner support the intensity setting?
for example:
-i 8
or
-i 21

[TrailingStop]

you can add either -d 2 3 4 or --cuda-devices 2 3 4 like this sample:

Hi TrailingStop!
Does the miner support the intensity setting?
for example:
-i 8
or
-i 21

Hi Master Chief,

no, it does not. Do you need that 'urgent' ?

[skh00]

Please back option --list-devices without program exit.  
I used it for work your API with AwesomeMiner

[TrailingStop]

Please back option --list-devices without program exit.  
I used it for work your API with AwesomeMiner

Starting with release 2.1.5 the miner shows the list of GPUs found on startup - even without adding --list-devices. So you have two choices,

with --list-devices:       the miner shows the GPU list and exit
without --list-devices:  the miner shows the GPU list and continues

Hope that helps?

[skh00]

Please back option --list-devices without program exit.  
I used it for work your API with AwesomeMiner

Starting with release 2.1.5 the miner shows the list of GPUs found on startup - even without adding --list-devices. So you have two choices,

with --list-devices:       the miner shows the GPU list and exit
without --list-devices:  the miner shows the GPU list and continues

Hope that helps?

Perhaps you changed API output format?
In the previous version, Awesomeminer correctly take data from API and displayed all information of your miner with 2 options: --api-bind 127.0.0.1:4028 --list-devices

[TrailingStop]

New version 2.1.6 is available!

   - performance improvement for all algos
   - miner shows now Hashes / Watt if power consumption information is available
   - fixes (api-password, generation of nonce2)
   - reduced number of rejected shares over all algos


TT-Miner is now supported by these Software Packages:

   Awesome Miner Version 6.1.4
      Hompage: https://www.awesomeminer.com/home
      Bitcointalk: https://bitcointalk.org/index.php?topic=676942.0

   EthMonitoring Version v1.05
      Homepage: https://github.com/JamesSmith2/EthMonitoring/releases
      Bitcointalk: https://bitcointalk.org/index.php?topic=1932864.0
      TT-Miner chat @discord: https://discord.gg/hyzUMT

   MultiPoolMiner
      Homepage: www.multipoolminer.io


Let me know if you have any issues.
Thanks and: Happy mining