TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 04, 2018, 12:56:03 PM |
|
The current release is 18.10.44.32 - improved algorithm to avoid stale shares @ nicehash - show information if OC settings are detected as too tough The miner shows if a GPU kernel couldn't run. In most cases the reason for this problem are the OC settings for that GPU, as a result the other GPUs will report errors as well. In this sample the OC settings for GPU#3 is so strong that the kernel failed to launch. As a result all other GPUs show the same issue. I recommend to lower the settings for GPU#3 first and run a test before you change the settings for the other GPUs. Unfortunately I cannot tell if the Core or the Mem setting causes the problem - if at all. Please keep in mind that GPU#3 is most likely GPU4 in MSI-Afterburner. 13:47:09 Received new job#: 0x87da2996d66b96613436324bf35dd1205f7813f1c13a2fc7d21494c5d31a3c65 13:47:10 Error: GPU[3] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: GPU[4] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: GPU[0] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: GPU[2] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: GPU[1] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: GPU[5] Cannot launch kernel. Please check OC settings for this GPU. GPU disabled. 13:47:10 Error: All GPUs are disabled. TT-Miner cannot continue and will exit now Download: https://TradeProject.de/download/Miner/TradeTec-Miner.zipVirusTotal: https://www.virustotal.com/#/url/0ec02fd95005c025162168c49c0442659268f7930805fd53216a6598a8660a32/detectionHappy mining
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 11, 2018, 08:10:58 PM |
|
The current release is 18.10.44.32
- improved algorithm to calculate CUDA grid & block size (ProgPoW & Ethash).
This version will give you better hashrates compared to older version of the TT-miner if you do not set the CUDA grid or block size yourself in the command line. This improvement works for Ethash as well as ProgPoW algo.
Happy mining
|
|
|
|
Xman79
Jr. Member
Offline
Activity: 62
Merit: 1
|
|
November 11, 2018, 11:45:33 PM |
|
Hello, I v got error : could not find entry point
any idea ?
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 12, 2018, 02:04:30 AM |
|
Hi Xman69
I've just fixed an bug reported by an other user and uploaded the new release. Please retry if your problem is fixed too? If not can you please give me more information what the problem is please? Which pool do you use, which algo? Maybe you can share (or PM me) your command line?
Thanks.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 13, 2018, 11:44:38 PM |
|
New release 18.10.46.35
- command line version shows now the calculated values for CUDA gridsize and CUDA blocksize (these values are calculates for TT-Miner and may not perform well with other miners!) - minor adjustments for the new epoch 4 for Bitcoin Interest (ProgPoW)
Happy mining
|
|
|
|
topteam
Newbie
Offline
Activity: 157
Merit: 0
|
|
November 22, 2018, 08:36:07 PM |
|
Are you plane to release a linux build?
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 23, 2018, 06:43:43 AM |
|
Hi Topteam,
so far I do not have any plans to release a Linux version. I do not have much skills developing for Linux and I'm not sure if all the work makes sense since more and more miners give up. If I have an indication that enough miners would use a Linux TT-Miner I would change my mind and develop a Linux version.
Isn't there any way to run the windows version of TT-Miner on Linux?
|
|
|
|
Teranaft
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 23, 2018, 07:34:31 AM |
|
Hi Xman69
I've just fixed an bug reported by an other user and uploaded the new release. Please retry if your problem is fixed too? If not can you please give me more information what the problem is please? Which pool do you use, which algo? Maybe you can share (or PM me) your command line?
Thanks.
Hi! The entry point to the procedure SetThreadDescription is not found in the library dll https://i107.fastpic.ru/big/2018/1123/4d/a45d6f12690072f96cb534947f7c884d.pngWin 8.1 Nvidia driver 416.94 Microsoft Visual C++ Visual Studio 2017 (64-Bit)
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 23, 2018, 07:42:14 AM |
|
Hi Teranaft,
good catch - that's a Windows 10 only function and it is not available on 8.1. Will fix that and release a new version in a few hours.
Thx.
|
|
|
|
Teranaft
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 23, 2018, 09:24:14 AM |
|
Hi Teranaft,
good catch - that's a Windows 10 only function and it is not available on 8.1. Will fix that and release a new version in a few hours.
Thx.
Thx
|
|
|
|
|
Teranaft
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 23, 2018, 10:23:25 AM |
|
it works, thank you so much!
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 23, 2018, 06:18:58 PM |
|
New release 18.10.47.37 In the earlier build 36 I fixed an issue that causes a crash if the miner was started on a non-Windows 10 OS. As a new feature you can add now one or more backup pools. Just add another -P command line with the secondary pool. The TT-Miner uses the order in which the pools are listed on the command line. The first -P parameter defines the primary pool, the second the first backup pool and so on. In the sample below ‘bci-eu.coinblockers.com:3910’ is the primary pool and ‘bci.luckypool.io:3857’ the secondary. In the case that the primary pool is not available the miner switches to the secondary pool. After DevFee mining TT-Miner tries to connect to the primary pool again. Please not that all backup server must use the algo that is defined with the -A option! You cannot mix algos with the command line version of TT-Miner. TT-Miner also switches to the backup pool if the connection to the primary pool gets lost more than 4 times within 2 minutes. Sample command line: TradeTec-MinerCmd -A PROGPOW-100 -P i4LgJvEEQesscRKCcu8aaPWsVAcuujpicQ.TTMiner_Dev@bci-eu.coinblockers.com:3910 -P i4LgJvEEQesscRKCcu8aaPWsVAcuujpicQ.TTMiner_Dev@bci.luckypool.io:3857 --list-devices Please not that the is no need for ‘stratum+tcp://’ in the -P option. TT-Miner can automatically detect the correct stratum dialect that is required for the communication with the pool. You can download the latest version of TT-Miner here: https://TradeProject.de/download/Miner/TradeTec-Miner.zipAs always TT-Miner is NOT suspected to contain a virus. You can even download it on Windows 10 and the Windows-Defender will NOT remove it 😊 https://www.virustotal.com/#/url/0ec02fd95005c025162168c49c0442659268f7930805fd53216a6598a8660a32/detectionLet me know if you have any issues! Happy mining
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 26, 2018, 12:19:02 PM |
|
New release 18.11.47.38 TT-Miner supports MinerMonitoring ( https://minermonitoring.com/) now. To enable the Monitoring api please add --api-bind IP[:port] to the command line. It is required to add the IP of the interface that should offer the API support. You can add 127.0.0.1 for localhost. The port number is optional. If you do not specify a port number the default port 3333 is used. To use an additional password to enable the API you can add --api-password PASSWORD. Please replace 'PASSWORD' with the password of you choice. Please let me know if you run into issues. Happy mining
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 27, 2018, 06:08:26 PM |
|
New release 18.11.47.39
improved calculation for grid- and blocksize which should end up in a higher hashrate for Ethash as well as ProgPoW.
Let me know if you run into issues. Happy mining
|
|
|
|
Umister
Newbie
Offline
Activity: 29
Merit: 0
|
|
November 27, 2018, 06:42:41 PM |
|
New release 18.11.47.39
improved calculation for grid- and blocksize which should end up in a higher hashrate for Ethash as well as ProgPoW.
Let me know if you run into issues. Happy mining
Is your miner faster than Phoenix miner in ETH mining?
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
November 27, 2018, 06:46:01 PM Last edit: November 27, 2018, 08:17:15 PM by TrailingStop |
|
I can compare. Is a 1060 OK for you?
On my 1050Ti (dev-GPU, runs on 75% ,power, +0/+0 ) Phoenix is faster: 12.49 vs 12.46.
TradeTec-Miner - 1050Ti 21:13:45 Rig-Speed[1 min]: 12.50 MH/s [A0:R0] Uptime: 00:01:02 LastShare: - 21:13:53 Received new job#: 7a4995e4fd6d0b786623828fafb851cb9fe1325dfe1a1b1c03c9d8a739e65478 21:14:00 GPU[0]: 12.47 MH/s 54C 25% [A0:R0] LastShare: - 21:14:00 Rig-Speed[1 min]: 12.47 MH/s [A0:R0] Uptime: 00:01:17 LastShare: - 21:14:05 GPU[0]: **Accepted 22 ms. eu1-etc.ethermine.org:4444 [172.65.232.146] 21:14:15 GPU[0]: 12.46 MH/s 56C 29% [A1:R0] LastShare: 00:00:09 21:14:15 Rig-Speed[1 min]: 12.46 MH/s [A1:R0] Uptime: 00:01:32 LastShare: 00:00:09 21:14:24 Received new job#: 622eb742e9b10ce1bd079a92b7574c904627c4ba35869076d134659ed8b415ad 21:14:25 Received new job#: 425e2387256dc5f5875bf10b9d8168aa230641fbfe1be89765b68309fbc65b82 21:14:28 Received new job#: 3bf030d4ea6b037ddc20c95d0af6f336aae4b98f734856ac9fd8aaf0c4e8fee3 21:14:30 GPU[0]: 12.48 MH/s 58C 32% [A1:R0] LastShare: 00:00:24 21:14:30 Rig-Speed[1 min]: 12.48 MH/s [A1:R0] Uptime: 00:01:47 LastShare: 00:00:24
Phoenix Miner 3.5d Windows/msvc - Release build Eth: Mining ETC on eu1-etc.ethermine.org:4444 for 0:05 Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% Eth: Average speed (5 min): 12.493 MH/s Eth: Effective speed: 0.00 MH/s; at pool: 0.00 MH/s
Eth speed: 12.492 MH/s, shares: 0/0/0, time: 0:05
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
December 01, 2018, 05:32:21 PM |
|
New release 18.12.48.40
Fixed bug that came up with Epoch 5 today. Please update your TT-Miner if you use it for ProgPoW, Ethash will continue to work - no action needed!
Sorry for the inconveniences!
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
December 10, 2018, 01:07:10 AM |
|
New release 18.12.50.41
- new algo Ubqhash for Ubiq - minor changes for other algos.
Sample for a Ubiq commandline for CUDA 10.0 devices. The second -P parameter defines the backup pool:
TradeTec-MinerCmd.exe -A UBQHASH-100 -P YOUR_WALLET.YOUR_WORKER@ubiq-eu.maxhash.org:10008 -P YOUR_WALLET.YOUR_WORKER@ubiq-us.maxhash.org:10008 --list-devices
Happy mining.
|
|
|
|
dragonmike
|
|
December 11, 2018, 12:30:27 PM |
|
Hi, how can I select which devices to mine with using the console (as in I only want to use gpu 2,3 and 4 for example)?
|
|
|
|
|