|
|
|
|
|
|
|
In order to get the maximum amount of activity points possible, you just need to post once per day on average. Skipping days is OK as long as you maintain the average.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
cregsanjay
Newbie
 Offline
Activity: 3
Merit: 0
|
 |
March 24, 2019, 11:30:50 PM |
|
I'm curious what sort of hashrates the VII will be getting once it is optimized in teamred
|
|
|
|
|
sharmanov
Newbie
Offline
Activity: 54
Merit: 0
|
|
March 25, 2019, 03:59:54 AM |
|
Got a problem on VII.... Miner cuts off if temps get above 85C but VII's junction temps get beyond 100C (which is normal)..... Is there any way to turn off Temp control in the miner?
|
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
March 25, 2019, 10:27:35 AM |
|
Got a problem on VII.... Miner cuts off if temps get above 85C but VII's junction temps get beyond 100C (which is normal)..... Is there any way to turn off Temp control in the miner?
Use this cmd line arg: --temp_limit=TEMP Sets the temperature at which the miner will stop GPUs that are too hot. So, add e.g. --temp_limit=105 or similar. Make sure to blast those fans though, the effective cooling on the VIIs is horrible. |
|
|
|
|
keyduk
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 31, 2019, 02:47:42 AM
Last edit: March 31, 2019, 02:57:59 AM by keyduk |
|
Hello,I hope the developers read this thread. New version 0.4.3 crash on VEGA56\64 rig for linux (HiveOS). If I choose previous version 0.4.2 miner works correctly. This problem is only for VEGA. 570\580 work correctly too on new 0.4.3 Please fix https://i.ibb.co/RcRKYL7/teamred.jpghttps://i.ibb.co/dcJNt6G/teamred2.jpg |
|
|
|
|
|
bbvedf
|
|
April 03, 2019, 10:13:11 AM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs.  Can you think of something I can look at or try? |
|
|
|
|
bbvedf
|
|
April 08, 2019, 11:43:56 AM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? |
|
|
|
ku4eto
Jr. Member
Offline
Activity: 194
Merit: 4
|
|
April 08, 2019, 04:46:53 PM
Last edit: April 08, 2019, 05:02:17 PM by ku4eto |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? Hm, i am not sure. How does it crash? Instantly, or after some period of time? If its after some period, your core voltage is probably too low. Increase by 12.5mV and try again. |
|
|
|
|
|
bbvedf
|
|
April 08, 2019, 07:49:29 PM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? Hm, i am not sure. How does it crash? Instantly, or after some period of time? If its after some period, your core voltage is probably too low. Increase by 12.5mV and try again. Thanks @ku4eto! It is not immediate. Nor am I aware of exactly when it happens. I look at the miner a couple of times a day, and sometimes I find that the GPU3 (always the 3) is dead. I already have a few UV / OC tests, and it makes sense that you say to raise the voltages. I have to find the key  Does anyone mine this algo with RX580? What setup do you have? I have also read in one of the threads that version 0.4.3 gives more problems in that sense (dead GPU) than 4.0.2. Would I solve something by going back to an earlier version? Regards! |
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
April 08, 2019, 08:17:14 PM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? Hm, i am not sure. How does it crash? Instantly, or after some period of time? If its after some period, your core voltage is probably too low. Increase by 12.5mV and try again. Thanks @ku4eto! It is not immediate. Nor am I aware of exactly when it happens. I look at the miner a couple of times a day, and sometimes I find that the GPU3 (always the 3) is dead. I already have a few UV / OC tests, and it makes sense that you say to raise the voltages. I have to find the key Does anyone mine this algo with RX580? What setup do you have? I have also read in one of the threads that version 0.4.3 gives more problems in that sense (dead GPU) than 4.0.2. Would I solve something by going back to an earlier version? Regards! Hi! I don't believe you'll see any difference with earlier versions, things haven't really changed at all for the compute algos lately, the last 4-5 updates have all been update CN algos/variants. Otherwise, I agree with ku4eto that you simply need to tweak clocks and voltages here to find a level where this problematic gpu survives over time. |
|
|
|
|
|
bbvedf
|
|
April 09, 2019, 07:21:13 AM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? Hm, i am not sure. How does it crash? Instantly, or after some period of time? If its after some period, your core voltage is probably too low. Increase by 12.5mV and try again. Thanks @ku4eto! It is not immediate. Nor am I aware of exactly when it happens. I look at the miner a couple of times a day, and sometimes I find that the GPU3 (always the 3) is dead. I already have a few UV / OC tests, and it makes sense that you say to raise the voltages. I have to find the key Does anyone mine this algo with RX580? What setup do you have? I have also read in one of the threads that version 0.4.3 gives more problems in that sense (dead GPU) than 4.0.2. Would I solve something by going back to an earlier version? Regards! Hi! I don't believe you'll see any difference with earlier versions, things haven't really changed at all for the compute algos lately, the last 4-5 updates have all been update CN algos/variants. Otherwise, I agree with ku4eto that you simply need to tweak clocks and voltages here to find a level where this problematic gpu survives over time. Thanks @kerney666. I keep doing tests. I use the 0.4.3 miner from Minerstat, and it is not easy to set UV / OC values. Comment also that today, for the first time, a different GPU has died: It has touched GPU2 ...  |
|
|
|
ku4eto
Jr. Member
Offline
Activity: 194
Merit: 4
|
|
April 09, 2019, 06:41:27 PM |
|
Hi guys! Im running TRM from Minerstat software. Algo Lyra2REV3, pool NH, 4*RX580 8Gb. Something I must be doing wrong in the UV, because lowering memory to 300 in the 4 GPU, one of them ends up dying (always the same). [2019-04-03 12:26:27] Pool lyra2rev3.eu.nicehash.com share accepted. (GPU1) (a: 7757 r: 3) (66 ms)
[2019-04-03 12:26:30] Stats Uptime: 0 days, 17:28:01
[2019-04-03 12:26:30] GPU 0 [51C, fan 65%] lyra2rev3: 50.13Mh / s, avg 50.07Mh / s, pool 46.81Mh / s to: 2297 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 1 [47C, fan 65%] lyra2rev3: 50.12Mh / s, avg 50.06Mh / s, pool 46.26Mh / s to: 2260 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 2 [52C, fan 65%] lyra2rev3: 50.09Mh / s, avg 50.03Mh / s, pool 45.07Mh / s to: 2220 r: 1 hw: 0
[2019-04-03 12:26:30] GPU 3 [27C, fan 65%] lyra2rev3: 0.0 h / s, avg 27.27Mh / s, pool 23.05Mh / s to: 982 r: 0 hw: 0
[2019-04-03 12:27:01] Please use command line argument --watchdog_script to handle dead GPUs.
[2019-04-03 12:27:11] GPU 3: detected DEAD (05: 00.0), no restart script configured, will continue mining.
[2019-04-03 12:27:11] Please use command line argument --watchdog_script to handle dead GPUs. Can you think of something I can look at or try? Anyone? Hm, i am not sure. How does it crash? Instantly, or after some period of time? If its after some period, your core voltage is probably too low. Increase by 12.5mV and try again. Thanks @ku4eto! It is not immediate. Nor am I aware of exactly when it happens. I look at the miner a couple of times a day, and sometimes I find that the GPU3 (always the 3) is dead. I already have a few UV / OC tests, and it makes sense that you say to raise the voltages. I have to find the key Does anyone mine this algo with RX580? What setup do you have? I have also read in one of the threads that version 0.4.3 gives more problems in that sense (dead GPU) than 4.0.2. Would I solve something by going back to an earlier version? Regards! Hi! I don't believe you'll see any difference with earlier versions, things haven't really changed at all for the compute algos lately, the last 4-5 updates have all been update CN algos/variants. Otherwise, I agree with ku4eto that you simply need to tweak clocks and voltages here to find a level where this problematic gpu survives over time. Thanks @kerney666. I keep doing tests. I use the 0.4.3 miner from Minerstat, and it is not easy to set UV / OC values. Comment also that today, for the first time, a different GPU has died: It has touched GPU2 ... 50MH/s seems too high, are you running the GPUs at 1350Mhz+? You know you can post your voltage and clocks used, right? |
|
|
|
|
|
bbvedf
|
|
April 09, 2019, 07:35:25 PM |
|
...
50MH/s seems too high, are you running the GPUs at 1350Mhz+?
You know you can post your voltage and clocks used, right?
I'm not sure if it's a lot or a little. I have nothing to compare What I can do is share with you my Minerstat setup. I remember that they are 4x Sapphire Pulse RX580 8Gb, miner TRM 0.4.3, bios modified w/Polaris. GPUS:  OC/UV:  Summary:  As you can see, GPU core clock at 1257Mhz ... |
|
|
|
ku4eto
Jr. Member
Offline
Activity: 194
Merit: 4
|
|
April 10, 2019, 05:18:02 PM |
|
...
50MH/s seems too high, are you running the GPUs at 1350Mhz+?
You know you can post your voltage and clocks used, right?
I'm not sure if it's a lot or a little. I have nothing to compare What I can do is share with you my Minerstat setup. I remember that they are 4x Sapphire Pulse RX580 8Gb, miner TRM 0.4.3, bios modified w/Polaris. GPUS: OC/UV: Summary: As you can see, GPU core clock at 1257Mhz ... Not sure how accurate is the VDDC, but 0.945V for ~1250Mhz is actually within the OK range. What OS are you using? |
|
|
|
|
|
bbvedf
|
|
April 10, 2019, 06:22:47 PM |
|
...
50MH/s seems too high, are you running the GPUs at 1350Mhz+?
You know you can post your voltage and clocks used, right?
I'm not sure if it's a lot or a little. I have nothing to compare What I can do is share with you my Minerstat setup. I remember that they are 4x Sapphire Pulse RX580 8Gb, miner TRM 0.4.3, bios modified w/Polaris. GPUS: OC/UV: Summary: As you can see, GPU core clock at 1257Mhz ... Not sure how accurate is the VDDC, but 0.945V for ~1250Mhz is actually within the OK range. What OS are you using? I use a live-USB that minerstat calls MSOS. Basically, a Linux distribution. Surely there are many more options via frontend or even backend, but I have configured the minimum to start mining. If you use minerstat or if you have any interesting command line parameter for TRM, ... Any advice is welcome  |
|
|
|
ku4eto
Jr. Member
Offline
Activity: 194
Merit: 4
|
|
April 13, 2019, 07:48:12 AM |
|
...
50MH/s seems too high, are you running the GPUs at 1350Mhz+?
You know you can post your voltage and clocks used, right?
I'm not sure if it's a lot or a little. I have nothing to compare What I can do is share with you my Minerstat setup. I remember that they are 4x Sapphire Pulse RX580 8Gb, miner TRM 0.4.3, bios modified w/Polaris. GPUS: OC/UV: Summary: As you can see, GPU core clock at 1257Mhz ... Not sure how accurate is the VDDC, but 0.945V for ~1250Mhz is actually within the OK range. What OS are you using? I use a live-USB that minerstat calls MSOS. Basically, a Linux distribution. Surely there are many more options via frontend or even backend, but I have configured the minimum to start mining. If you use minerstat or if you have any interesting command line parameter for TRM, ... Any advice is welcome Well, aside from advising to try if the same happens with another OS, there is nothing else that i can say. |
|
|
|
|
|
bbvedf
|
|
April 13, 2019, 09:37:45 AM |
|
...
Well, aside from advising to try if the same happens with another OS, there is nothing else that i can say.
Yeah. I can try any other. I had thought of HiveOS, which is also very well known (although I do not know if it has support for TRM  ) Nor would I mind using a live-USB from any Linux distro, although maybe the configuration is a bit complicated. What I do not want is to use Windows (it gave me many problems of locks and restarts). You know, any recommendation is welcome |
|
|
|
joseph32
Member
Offline
Activity: 413
Merit: 21
|
|
April 13, 2019, 05:26:00 PM |
|
Windows doesn't restart. Just turn off the updates every 30 days, problem solved.
|
|
|
|
|
ku4eto
Jr. Member
Offline
Activity: 194
Merit: 4
|
|
April 13, 2019, 06:18:17 PM |
|
...
Well, aside from advising to try if the same happens with another OS, there is nothing else that i can say.
Yeah. I can try any other. I had thought of HiveOS, which is also very well known (although I do not know if it has support for TRM ) Nor would I mind using a live-USB from any Linux distro, although maybe the configuration is a bit complicated. What I do not want is to use Windows (it gave me many problems of locks and restarts). You know, any recommendation is welcome Uhh... If it locks, it means bad OC. If it restarts, it means not-so bad OC. I am using Windows on my rig, and uptime is like... 1 month on CN and before that, 1 month on Lyra? |
|
|
|
|
drogasi
Newbie
Offline
Activity: 47
Merit: 0
|
|
April 14, 2019, 08:45:49 PM |
|
Hello, what's the performance of radeon vii and vega 56 for vertcoin?
|
|
|
|
|
|
