micax1
|
|
June 17, 2019, 04:56:54 AM |
|
I have rig w rx 550s xmr stak works ok. however init of teamredminer fails like that:
[2019-06-17 07:55:22] Comm buf exit code timeout (fffffffe/8279/624952337/624952337/00000000). [2019-06-17 07:55:22] Warning: failed to initialize device number 3 (-42), retrying. [2019-06-17 07:55:27] Comm buf exit code timeout (fffffffe/8279/1551172833/1551172833/00000000). [2019-06-17 07:55:27] Warning: failed to initialize device number 3 (-42), retrying.
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
June 17, 2019, 05:11:53 AM |
|
I have rig w rx 550s xmr stak works ok. however init of teamredminer fails like that:
[2019-06-17 07:55:22] Comm buf exit code timeout (fffffffe/8279/624952337/624952337/00000000). [2019-06-17 07:55:22] Warning: failed to initialize device number 3 (-42), retrying. [2019-06-17 07:55:27] Comm buf exit code timeout (fffffffe/8279/1551172833/1551172833/00000000). [2019-06-17 07:55:27] Warning: failed to initialize device number 3 (-42), retrying.
Are you running a CPU miner at the same time by any chance? Our init is a bit CPU intensive, and can timeout if there is another process running at 100% CPU usage.
|
|
|
|
micax1
|
|
June 17, 2019, 06:11:01 PM Last edit: June 17, 2019, 06:24:52 PM by micax1 |
|
I have rig w rx 550s xmr stak works ok. however init of teamredminer fails like that:
[2019-06-17 07:55:22] Comm buf exit code timeout (fffffffe/8279/624952337/624952337/00000000). [2019-06-17 07:55:22] Warning: failed to initialize device number 3 (-42), retrying. [2019-06-17 07:55:27] Comm buf exit code timeout (fffffffe/8279/1551172833/1551172833/00000000). [2019-06-17 07:55:27] Warning: failed to initialize device number 3 (-42), retrying.
Are you running a CPU miner at the same time by any chance? Our init is a bit CPU intensive, and can timeout if there is another process running at 100% CPU usage. that`s hive OS and no cpu mining. I`ve also tried different init scenaries with same result
|
|
|
|
OutkastNZ
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 19, 2019, 12:35:24 AM |
|
Hey guys, Ive noticed in the latest updates my command for gpu allocation isnt working anymore, i was using -d 1,2 etc... any ideas what the new 1 is?
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
June 19, 2019, 07:09:12 AM |
|
Hey guys, Ive noticed in the latest updates my command for gpu allocation isnt working anymore, i was using -d 1,2 etc... any ideas what the new 1 is?
Hmm that is strange, nothing has been (intentionally) changed. Can you post your anonymized full command line?
|
|
|
|
ggarbi
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
June 22, 2019, 03:38:56 AM |
|
Hey guys im having a big problem with my xfx vega 64 / x7 rig. When i start mining everything is fine but after a day or two days or more one of my gpus hashrate falling down and then makes the whole rig crash. My settings are 1175/925 core 1050/905 memory driver 19.4.1 windows 10 (old TRM 0.4.5 is more stable for my rig)
Paging 80gb and i changed my clocks too much but nothing changed. My friend also has this problem. Does someone know what should i do or how to troubleshoot this ?
|
|
|
|
OutkastNZ
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 25, 2019, 12:57:24 AM |
|
Hey guys, Ive noticed in the latest updates my command for gpu allocation isnt working anymore, i was using -d 1,2 etc... any ideas what the new 1 is?
Hmm that is strange, nothing has been (intentionally) changed. Can you post your anonymized full command line? Im running through Awesome miner, so unsure where to find that sorry. All i know is the software will no longer run if i use -d 0,1,2. But if i remove that it runs to the wrong cards e.g. 3,4,5
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
June 25, 2019, 01:58:18 AM |
|
Hey guys, Ive noticed in the latest updates my command for gpu allocation isnt working anymore, i was using -d 1,2 etc... any ideas what the new 1 is?
Hmm that is strange, nothing has been (intentionally) changed. Can you post your anonymized full command line? Im running through Awesome miner, so unsure where to find that sorry. All i know is the software will no longer run if i use -d 0,1,2. But if i remove that it runs to the wrong cards e.g. 3,4,5 Try running the diagnostic command in the toolbar. It should spit out the cmd line along with the miner start up. From there, you can start seeing where things are failing.
|
|
|
|
pwhite11798
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 30, 2019, 04:12:57 AM |
|
computer crashed after a couple of months of mining. Now when i try to start miner only on cnr algo it says failed to initiate device idx 5 (-31) i have tried going to a previous restore point, reseting my computer and reinstalling drivers w/ddu. all have the same end result. dont know whats up. any help would br much appriciated.
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
June 30, 2019, 09:10:13 AM |
|
computer crashed after a couple of months of mining. Now when i try to start miner only on cnr algo it says failed to initiate device idx 5 (-31) i have tried going to a previous restore point, reseting my computer and reinstalling drivers w/ddu. all have the same end result. dont know whats up. any help would br much appriciated.
Hi! That error is a mem buffer allocation error, it fails to allocate the (large) buffer for all the 2MB CN pads for that gpu. A few questions + things to try: - Does it work for that gpu if you run that gpu in isolation, i.e. you add "-d 5" to the command line? If so, do you have enough swap space available?
- Can you list the output from "teamredminer.exe --list_devices"?
- Do you run monitors on the problematic gpu?
|
|
|
|
pwhite11798
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 30, 2019, 04:38:23 PM |
|
computer crashed after a couple of months of mining. Now when i try to start miner only on cnr algo it says failed to initiate device idx 5 (-31) i have tried going to a previous restore point, reseting my computer and reinstalling drivers w/ddu. all have the same end result. dont know whats up. any help would br much appriciated.
Hi! That error is a mem buffer allocation error, it fails to allocate the (large) buffer for all the 2MB CN pads for that gpu. A few questions + things to try: - Does it work for that gpu if you run that gpu in isolation, i.e. you add "-d 5" to the command line? If so, do you have enough swap space available?
- Can you list the output from "teamredminer.exe --list_devices"?
- Do you run monitors on the problematic gpu?
Yes the gpu runs in isolation and to be quite honest i never have set up a watchdog to monitor problem matic gpus in the the past when i have tried i have not had any success (im not in the computer buisness this is more like a hobby for me) it takes me time to figure the programing out but have done ok with everything cuase of the plethora of info you can find on the internet. this all started when i tried to bring one of my vega 56 gpus back in the rig when it booted up it would give me a black screen and reset the system none stop. once i removed said gpu and checked the registry the vega 56 was recognized fully but for some reason windows would not boot. after that incident is when i started have issues with the system. for reference my system: asrock h110 btc pro+ with p4400 16mb ram 1x asus strix vega 64 3x nitro+ vega 64 1x powercolor vega 56 use to be 2x 1x rx 570 8g msi armor 2x evga 1660ti- i know mixing cards can cause problems but they are out of the system right now and the drivers have been removed with the latest ddu. also the systen ran for two weeks problem free running two different mining programs. 3200 watts of gold rated power supplies evga g3 corsair hxi 2 750 watt server supplies w/break out boards gpu 5 is currently running issolated at 2340 h/s tmr+amd mem tweak. p.s. as im writing this i just realized after my clean install i never rest my virtual ram to 80gb let me check if that fixes it.
|
|
|
|
pwhite11798
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 30, 2019, 05:03:03 PM |
|
computer crashed after a couple of months of mining. Now when i try to start miner only on cnr algo it says failed to initiate device idx 5 (-31) i have tried going to a previous restore point, reseting my computer and reinstalling drivers w/ddu. all have the same end result. dont know whats up. any help would br much appriciated.
Hi! That error is a mem buffer allocation error, it fails to allocate the (large) buffer for all the 2MB CN pads for that gpu. A few questions + things to try: - Does it work for that gpu if you run that gpu in isolation, i.e. you add "-d 5" to the command line? If so, do you have enough swap space available?
- Can you list the output from "teamredminer.exe --list_devices"?
- Do you run monitors on the problematic gpu?
Yes the gpu runs in isolation and to be quite honest i never have set up a watchdog to monitor problem matic gpus in the the past when i have tried i have not had any success (im not in the computer buisness this is more like a hobby for me) it takes me time to figure the programing out but have done ok with everything cuase of the plethora of info you can find on the internet. this all started when i tried to bring one of my vega 56 gpus back in the rig when it booted up it would give me a black screen and reset the system none stop. once i removed said gpu and checked the registry the vega 56 was recognized fully but for some reason windows would not boot. after that incident is when i started have issues with the system. for reference my system: asrock h110 btc pro+ with p4400 16mb ram 1x asus strix vega 64 3x nitro+ vega 64 1x powercolor vega 56 use to be 2x 1x rx 570 8g msi armor 2x evga 1660ti- i know mixing cards can cause problems but they are out of the system right now and the drivers have been removed with the latest ddu. also the systen ran for two weeks problem free running two different mining programs. 3200 watts of gold rated power supplies evga g3 corsair hxi 2 750 watt server supplies w/break out boards gpu 5 is currently running issolated at 2340 h/s tmr+amd mem tweak. p.s. as im writing this i just realized after my clean install i never rest my virtual ram to 80gb let me check if that fixes it. setting the virtual ram t/80gb fixed the failure to connect to device idx 5 (-31). now if i could figure out why this other vega 56 wont work.
|
|
|
|
pp55
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 30, 2019, 07:23:33 PM |
|
Hello,
I'm running TeamRedMiner 0.5.2 with AMD RX474 GPU on Nicehash x16r but I get about 30% shares rejected with "Share above target" error. Any ideas?
|
|
|
|
OutkastNZ
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 30, 2019, 10:07:05 PM Last edit: July 01, 2019, 11:53:00 PM by OutkastNZ |
|
Hey guys, Ive noticed in the latest updates my command for gpu allocation isnt working anymore, i was using -d 1,2 etc... any ideas what the new 1 is?
Hmm that is strange, nothing has been (intentionally) changed. Can you post your anonymized full command line? Im running through Awesome miner, so unsure where to find that sorry. All i know is the software will no longer run if i use -d 0,1,2. But if i remove that it runs to the wrong cards e.g. 3,4,5 Try running the diagnostic command in the toolbar. It should spit out the cmd line along with the miner start up. From there, you can start seeing where things are failing. Hi Ncarter thanks for the response i ran the diagnostics and got the following? Initialize diagnostics (4) Starting Diagnostics (30s). Awesome Miner Remote Agent version: 6.6 OS: Microsoft Windows 10 Pro 64-bit AMD driver version: 18.5.2 AMD OpenCL Platform ID: 0 Microsoft VC++ 2013 runtime installed: Yes Microsoft VC++ 2015 runtime installed: Yes Starting Mining Software Setting up Miner Engine. Instance: 3 Engine Type: TeamRedMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Properties: (WindowMode: ConsoleFormat, EngineType: TeamRedMiner, IsProfitMiner: True) ==================================================================================================== C:\Users\LilRedRig\AppData\Roaming\AwesomeMinerService\teamredminer-v0.5.2-win_3\teamredminer-v0.5.2-win\teamredminer.exe -d 0,1,2 -a phi2 --bus_reorder -d 2,3,4 -o stratum+tcp://lux.pickaxe.pro:8332 -u LNRWWRPD6gGnpLUicpRcFVKUituE5z862w -p C=LUX,d=4 --api_listen=0.0.0.0:4030 Configured command line: -d 0,1,2 ==================================================================================================== > Team Red Miner version 0.5.2 > [2019-07-01 10:04:59] Only one -d argument allowed. Failed to start miner process: Process has exited, so the requested information is not available. Failed to start miner in Diagnostics mode Diagnostics completed It appears tho awesome miner or the miner it self it putting in --bus_reorder, how do i stop this so it only uses my command -d 0,1,2
|
|
|
|
todxx (OP)
Member
Offline
Activity: 176
Merit: 76
|
|
July 03, 2019, 06:44:57 PM |
|
Team Red Miner v0.5.3 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.5.3 - Added MTP algo for Zcoin/XZC (please read MTP_MINING.txt before mining).
- Further small stabilization fixes for CN variants, primarily 4MB algos.
Now supporting the MTP algorithm for Zcoin !!!!! MTP IS EXTREMELY POWER HUNGRY AND HOT !!!! Please make sure to lower your clocks and have good cooling for your GPUs when testing MTP. MTP can consume double the power of other algos for un-tuned cards.
|
|
|
|
GKumaran
Member
Offline
Activity: 204
Merit: 10
|
|
July 03, 2019, 07:10:03 PM |
|
Team Red Miner v0.5.3 releasedhttps://github.com/todxx/teamredminer/releasesChanges in v0.5.3 - Added MTP algo for Zcoin/XZC (please read MTP_MINING.txt before mining).
- Further small stabilization fixes for CN variants, primarily 4MB algos.
Now supporting the MTP algorithm for Zcoin !!!!! MTP IS EXTREMELY POWER HUNGRY AND HOT !!!! Please make sure to lower your clocks and have good cooling for your GPUs when testing MTP. MTP can consume double the power of other algos for un-tuned cards. First Impression Results: Vega 64 : 225 watt = 2.8mh/s Vega 56, samsung flashed to 64 : 190 watt = 2.62 mh/s Vega 56, hynix : 180 watt = 2.45 mh/s Team Red Forever :sunglasses:
|
|
|
|
kokodesu
Newbie
Offline
Activity: 42
Merit: 0
|
|
July 04, 2019, 01:43:02 AM |
|
Thank you for adding MTP Argo. It's a shame that you can not do it with a 4GB GPU, but it may be difficult.
win10 RX570 8G 1100/1800 about 1Mhz RX580 8G 1340/2000 about 1.6Mhz
It was described in the wrong thread. I am sorry.
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
July 04, 2019, 09:13:45 AM |
|
mtp results seems quite impressive - will test today on my rigs!
|
|
|
|
kerney666
Member
Offline
Activity: 658
Merit: 86
|
|
July 04, 2019, 10:47:51 AM |
|
Thank you for adding MTP Argo. It's a shame that you can not do it with a 4GB GPU, but it may be difficult.
win10 RX570 8G 1100/1800 about 1Mhz RX580 8G 1340/2000 about 1.6Mhz
It was described in the wrong thread. I am sorry.
Thank you for testing! However, I must say your results are low compared to expected values, you should be able to hit ~1.6 MH/s (570) and ~1.8 MH/s (580) without too much tuning effort. I'll do a proper benchmark post soon, listing hashrates and settings for range of gpus.
|
|
|
|
qwep1
|
|
July 04, 2019, 11:28:06 AM |
|
Thank you for adding MTP Argo. It's a shame that you can not do it with a 4GB GPU, but it may be difficult.
win10 RX570 8G 1100/1800 about 1Mhz RX580 8G 1340/2000 about 1.6Mhz
It was described in the wrong thread. I am sorry.
Thank you for testing! However, I must say your results are low compared to expected values, you should be able to hit ~1.6 MH/s (570) and ~1.8 MH/s (580) without too much tuning effort. I'll do a proper benchmark post soon, listing hashrates and settings for range of gpus. 4gb dont work little video memory
|
|
|
|
|