Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[newgencryptomaker]

Model Zig Z1 from Dayun mining Lyra2REv2 algorithm

MY CORRECT VERSION

Current Version 20180914  OR ANY

new firmware upload friends


thank you

advance

[Mordred80]

Model Zig Z1 from Dayun mining Lyra2REv2 algorithm

MY CORRECT VERSION

Current Version 20180914  OR ANY

new firmware upload friends


thank you

advance

Hello

New Firmware (20180926) and instruction for the update:
https://www.cryptominerbros.com/dayun-zig-z1-firmware-upgrade-guide

I installed this Firmware and it works just fine.

[metnet]

i got a news about Dayun. Dayun Zig z1 PLUS  ready to sell. anyone heard about this machine?

[Mordred80]

i got a news about Dayun. Dayun Zig z1 PLUS  ready to sell. anyone heard about this machine?

Yeah...it has somthing between 7.00-7.20GH/s
Means a boost of max. 6%

[newgencryptomaker]

Model Zig Z1 from Dayun mining Lyra2REv2 algorithm

MY CORRECT VERSION

Current Version 20180914  OR ANY

new firmware upload friends


thank you

advance

Hello

New Firmware (20180926) and instruction for the update:
https://www.cryptominerbros.com/dayun-zig-z1-firmware-upgrade-guide

I installed this Firmware and it works just fine.

not updates

same version firmware only run....

give me your contact details

[newgencryptomaker]

here is my feedback.

got the miner 3 days ago

to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name

then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.

changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.

sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)

waiting for their technical team to reply..

this is my configuration

https://www.screencast.com/t/BLnyFx0I

https://www.screencast.com/t/pBDcSQmGpwe

Code:

{
    "pools": [
        {
            "url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
            "user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/pool.powermining.pw:4535",
            "user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
            "pass": "x"
        },
        {
            "url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
            "user": "roberto_f.zig",
            "pass": "x"
        }
    ],
    "api-allow": "W:0\/0",
    "api-description": "cgminer 4.11.1",
    "api-listen": true,
    "api-mcast-addr": "224.0.0.75",
    "api-mcast-code": "FTW",
    "api-mcast-des": "",
    "api-mcast-port": "4028",
    "api-network": true,
    "api-port": "4028",
    "expiry": "120",
    "failover-switch-delay": "300",
    "log": "5",
    "queue": "9999",
    "scan-time": "60",
    "shares": "0",
    "lyra2rev2-clk": "850",
    "lyra2rev2-vol": "0",
    "lyra2rev2-asic-x": "4",
    "lyra2rev2-asic-y": "24",
    "lyra2rev2-asic-num": "50",
    "lyra2rev2-cutofftemperature": "50",
    "lyra2rev2-cutofffanspeedin": "100",
    "lyra2rev2-cutofffanspeedout": "100",
    "lyra2rev2-restarthashrate": "3",
    "lyra2rev2-restartfailedcount": "100",
    "lyra2rev2-fan": "LV1",
    "lyra2rev2-check-testnonce": true,
    "lyra2rev2-scan-serial": "\/dev\/ttyS3",
    "lyra2rev2-restartenable": true,
    "lyra2rev2-cutoffenable": true
}

and this is the results

https://www.screencast.com/t/2nltNThwIBQ

hash rate quite erratic but never higher than 5GH

https://www.screencast.com/t/8cvezEcAnD

nicehash stats

https://www.screencast.com/t/XuROlvulVA

any feedback or suggestion, very welcome

Hi Roberto,

Can I send you a PM please?

Regards.

me to pls

[Mordred80]

Hello

Just wanna share some infos with you guys about the Zig Z1
But i also have some questions...

User Inetrface
First of all, i like it. Lots of information, options and easy to understand.
What i don't like, is the fact that the temerature does not refresh and it's impossibible that the temp does not change.
Du you guys have this issue too?


Network/IP
I had to change the IP range of my router from 192.168.0.xxx to 192.168.1.xxx to find the miner in my home network.
I you leave it on DHCP (dynamic ip), you have to search the miner almost each time after a reboot or disconnect.
For that you can access you router to check the new IP of the miner. Or you can use a tool. I use "Baikal Monitor"
It's pretty easy to use and you don't need to install it. Just double click the exe file and it starts. Works for Baikal, Bitmain and Dayun miner.

A known issue (at least for my miner) is that it changes the ip, even if you set a static ip after you unplug the powersupply.
I the use the "Baikal Monitor" to finde the new IP. The i can access ist again...
The funny part about this is, that when i check the network settings of the miner, it shows the static ip that i set.
No idea why it just takes another IP. So i only have to hit the "Save And Restart Miner" button for the network settings and then it boots with the right IP.
Do you guys have this issue too?


Settings - Options: Auto Restart Miner and Auto Stop Miner
Before you do some changes here, make sure to set te refresh rate (to find on the same page) at 120-180 sec or higher.
I you change the settings and this page does a refresh before you hit "save", then you lose all settings and have to to it again...

Option: Auto Restart Miner
Higher HW Counting In 30 Sec
For me, this is the most importat setting here. I set it somwhere between 50-60%
So if my miner starts to generate some HW (hardware) errors and they exceed the 50-60% that i set, then the miner restarts.
Still not sure what exactly a HW error is. But as far as i understand it, it's wehn the chips start to fail and send totally wrong results or no results at all.
Not to be confused with %-Rejected rates.

Lower Hashrate in 5 Min
If the avarage hashrate drops below 4Gh/s in a time of 5 mins, the miners just restarts.
It's also a good thing to activate.

Option: Auto Stop Miner
Higher Core Temperature
I also recommand to activate this option. I set it 60°C (140°F)
What it does? It stops the miner if it overheats...

Lower FanSpeed In/Out
I think i set it between 65-70%
So if a fan goes below this value (risk of overheating) the miner stops.


ASIC Status
To get near the 6.8GH/s, all the chips on the "ASIC Stauts" page have to be green.
Here is what i do if they are not:

Go on the Settings page and just hit the "Save and Restart Miner" button.
Check after 2-3 mins on the  "ASIC Status" page if its better. If not...hit that "Save and Restart Miner" button again.
Again, go check after 2-3 mins on the "ASIC Status" page if its better. If not, try this tome the "Save and Restart Machine" button.
Now wait 5mins and then check the "ASIC Status" page. If its's better...good, if not, pull the plug from the PSU and wait 10-15min.

Pull the plug back in and wait...
Again, check the "ASIC Status" page...if it's not better, repeate the steps above.

Sometime i need "only" 15 mins to make the chips all green.
One time it took my almost 1h...but it works.

Sometimes some chips need more time to turn from black to green.
So if most chips on a card are green and just a few black, i just wait 2-3mins and then they turn green.

Do you guys have this issue too?
And what do you do to make it work?


ASIC Status and Hashrate
All chips are green but you get 0GH/s on one card on the mainpage? (Local Miner Details)

Wait or manually refresh the page after 30 sec. Hashrate for this card back to normal? Good...no problem.

A good way to see if something is wrong is to check the AC value of the cards: Mainpage Local Miner Details
The AC value shows you the acceptet shares for each card.

If the difference is to big, then you know that one or more crads ar not working at full speed or not working al all even if alle chips are green.
The AC value of the 4 card should be the "same": +/- 5%


Well, that's it for now...

[metnet]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

[vincl]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

[sysubeing]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

A reasonable suspect. My reseller said the plus one will come by the end of October.

[Mordred80]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

[grenwolde]

Great summary below -- the only thing I would add is I set freq at 800, but seems to be unit dependent -- has been running solid for three days no drops and I added #xnsub to the pool address found it evened out the hashrates (less errors and stale shares) and less 0 hashrates -- found the sweet spot for the hashrate in my case was between 5.5 and 6.2.  The other thing is patience -- I am used to asics that boot quickly -- this thing does not -- let it sit for 5 -10 minutes or so before deciding it is not working. 

Hello

Just wanna share some infos with you guys about the Zig Z1
But i also have some questions...

User Inetrface
First of all, i like it. Lots of information, options and easy to understand.
What i don't like, is the fact that the temerature does not refresh and it's impossibible that the temp does not change.
Du you guys have this issue too?


Network/IP
I had to change the IP range of my router from 192.168.0.xxx to 192.168.1.xxx to find the miner in my home network.
I you leave it on DHCP (dynamic ip), you have to search the miner almost each time after a reboot or disconnect.
For that you can access you router to check the new IP of the miner. Or you can use a tool. I use "Baikal Monitor"
It's pretty easy to use and you don't need to install it. Just double click the exe file and it starts. Works for Baikal, Bitmain and Dayun miner.

A known issue (at least for my miner) is that it changes the ip, even if you set a static ip after you unplug the powersupply.
I the use the "Baikal Monitor" to finde the new IP. The i can access ist again...
The funny part about this is, that when i check the network settings of the miner, it shows the static ip that i set.
No idea why it just takes another IP. So i only have to hit the "Save And Restart Miner" button for the network settings and then it boots with the right IP.
Do you guys have this issue too?


Settings - Options: Auto Restart Miner and Auto Stop Miner
Before you do some changes here, make sure to set te refresh rate (to find on the same page) at 120-180 sec or higher.
I you change the settings and this page does a refresh before you hit "save", then you lose all settings and have to to it again...

Option: Auto Restart Miner
Higher HW Counting In 30 Sec
For me, this is the most importat setting here. I set it somwhere between 50-60%
So if my miner starts to generate some HW (hardware) errors and they exceed the 50-60% that i set, then the miner restarts.
Still not sure what exactly a HW error is. But as far as i understand it, it's wehn the chips start to fail and send totally wrong results or no results at all.
Not to be confused with %-Rejected rates.

Lower Hashrate in 5 Min
If the avarage hashrate drops below 4Gh/s in a time of 5 mins, the miners just restarts.
It's also a good thing to activate.

Option: Auto Stop Miner
Higher Core Temperature
I also recommand to activate this option. I set it 60°C (140°F)
What it does? It stops the miner if it overheats...

Lower FanSpeed In/Out
I think i set it between 65-70%
So if a fan goes below this value (risk of overheating) the miner stops.


ASIC Status
To get near the 6.8GH/s, all the chips on the "ASIC Stauts" page have to be green.
Here is what i do if they are not:

Go on the Settings page and just hit the "Save and Restart Miner" button.
Check after 2-3 mins on the  "ASIC Status" page if its better. If not...hit that "Save and Restart Miner" button again.
Again, go check after 2-3 mins on the "ASIC Status" page if its better. If not, try this tome the "Save and Restart Machine" button.
Now wait 5mins and then check the "ASIC Status" page. If its's better...good, if not, pull the plug from the PSU and wait 10-15min.

Pull the plug back in and wait...
Again, check the "ASIC Status" page...if it's not better, repeate the steps above.

Sometime i need "only" 15 mins to make the chips all green.
One time it took my almost 1h...but it works.

Sometimes some chips need more time to turn from black to green.
So if most chips on a card are green and just a few black, i just wait 2-3mins and then they turn green.

Do you guys have this issue too?
And what do you do to make it work?


ASIC Status and Hashrate
All chips are green but you get 0GH/s on one card on the mainpage? (Local Miner Details)

Wait or manually refresh the page after 30 sec. Hashrate for this card back to normal? Good...no problem.

A good way to see if something is wrong is to check the AC value of the cards: Mainpage Local Miner Details
The AC value shows you the acceptet shares for each card.

If the difference is to big, then you know that one or more crads ar not working at full speed or not working al all even if alle chips are green.
The AC value of the 4 card should be the "same": +/- 5%


Well, that's it for now...

[yrk1957]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

Akminer is a legit shop, so Zig+ looks real.

[Leh888]

Hello guys,

Thanks for the information about the dayun zig z1.

I assume the asic is real but with a lot of issues when mining on full speed, is there anyone who purchased a Dayun which really get a hashrate of 6.8 g/h without any issues mining stable for over 7 days?

What do you guys think about the profit of this asic, will it go to 10$ a day within 2 months?

Does anyone know which company produces this asic? or already multiple companies have this technology to produce a asic like this but from different brands?

The people who already have purchased this asic, do you recommend me to buy this asic now or to wait till a more stable improved asic is out mining with the same algo.

like to hear your opinions/information, thanks.

[metnet]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

here is the source.  new one is 7.2 gh
https://www.asicminervalue.com/miners/dayun/zig-z1-1
https://coinminingcentral.com/collections/frontpage/products/dayun-zig-z1-6-8-gh-s?rfsn=1704384.5cfb1b

[Mordred80]

Great summary below -- the only thing I would add is I set freq at 800, but seems to be unit dependent -- has been running solid for three days no drops and I added #xnsub to the pool address found it evened out the hashrates (less errors and stale shares) and less 0 hashrates -- found the sweet spot for the hashrate in my case was between 5.5 and 6.2.  The other thing is patience -- I am used to asics that boot quickly -- this thing does not -- let it sit for 5 -10 minutes or so before deciding it is not working.  

Hey there

Thank for the info abou the #xnsub
But i have a question.
On the Settings page there is a option called "Check Nonce Submit"
Is that the same or is it somthing else?

Edit: Testing the #xnsub right now. Let's see if it gets better
Edit 2: Does not work for me. Hashrat down by 15-20% and more invalide/rejected shares.
I think that's because #xnsub and "Check Nonce Submit" is the same think and having both activatet does not work well...

[vincl]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

i strongly thing its a scam site. crypto only. and they copied the icon from bitmain website (made a screenshot and edited the text). very unprofessional lol.
"Beware of phishing scams - xxxx only accepts orders through our official website."

[Fravarti]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

i strongly thing its a scam site. crypto only. and they copied the icon from bitmain website (made a screenshot and edited the text). very unprofessional lol.
"Beware of phishing scams - xxxx only accepts orders through our official website."

This is standart wordpress shop

[Mordred80]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

i strongly thing its a scam site. crypto only. and they copied the icon from bitmain website (made a screenshot and edited the text). very unprofessional lol.
"Beware of phishing scams - xxxx only accepts orders through our official website."

The Zig Z1+ is now also available on the official Dayun shop
https://dayun.company/shop/

[vincl]

dayun zig z1 plus is coming soon. i think it is updated zig z1 nothing change just software updated. Anyone do you have info about zig z1 plus.

source?

only source i found is here:
https://www.akminer.com/all-products/the-worlds-first-the-most-power-efficient-28nm-lyra2rev2-asic-miner-dayun-zig-z1
They say it has >7.0Gh/s

But on the other hand, in the Dayun shop i can only find the standard Z1:
https://dayun.company/shop/

So i think there is no new miner coming...but who knows.

i strongly thing its a scam site. crypto only. and they copied the icon from bitmain website (made a screenshot and edited the text). very unprofessional lol.
"Beware of phishing scams - xxxx only accepts orders through our official website."

The Zig Z1+ is now also available on the official Dayun shop
https://dayun.company/shop/

1. im 99% sure the website is not official and is a complete scam
2. you registered one day ago and promote this shop in a certain way....