Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[maximry]

Hello guys do you have custom firmware for Z1 Pro? I see only Z1 and Z1+ custom are available so does it exist (custom firmware for Z1 Pro) or not? Thanks a lot.

[Ruso21]

Is it normal for this hash to go down to zero and back up again then every so often or should it remain consistent?

it depends in which pool you are mining, also the temperature it has the ASIC

if you mine in nicehash, you will get constant "equal" hash because you are selling it.
if you mine in other pools, then the hash will throttle less or high depending in which pool.
it throttle when it's mining another coin (when changing to another coin) also it depends of the difficulty at the moment.

the ASIC has a temperature protection, so if reach at a certain number, then will reboot.

[Litecoiners]

Hello .I want to ask something .I found a strange problem with time on Z1 and Z1 pro but maybe affects all Z1 machines.I mean at last days i have stale shares so i investigated the problem and i found something strange.
So first lets take a look on my logs.This is log from XVG mining:
[2019-11-08 10:34:32] New block: c0c21ffd92f66bda8bb09c1fed0b24e14e00a682d89f336237a61135fb817379... diff 106K
[2019-11-08 10:34:32] Stratum from pool 0 detected new block
[2019-11-08 10:34:32] Send work to asic
[2019-11-08 10:34:34] Accepted 2a4f6ace Diff 6/1000 lyra2rev2 0 pool 0
.......
[2019-11-08 10:35:11] Network diff set to 99.1K
[2019-11-08 10:35:11] New block: dcb87fbf5b8aa22c42219bd673a6c8debdba97fddc46373f893e81865fd46f61... diff 99.1K
---------------
But as we can see on block explorer https://prohashing.com/explorer/Verge/ this block dcb87fbf5b8aa22c42219bd673a6c8debdba97fddc46373f893e81865fd46f61 is not generated at [2019-11-08 10:35:11] but much earlier .So i received (as new job) with huge delay.
But i will be more specific.As you can see , the correct time of dcb87fbf5b8aa22c42219bd673a6c8debdba97fddc46373f893e81865fd46f61 which appear also on explorer, is the same time of previous block c0c21ffd92f66bda8bb09c1fed0b24e14e00a682d89f336237a61135fb817379 [2019-11-08 10:34:32]  ! But i received it around 40 seconds later according the logs.So many times i see stale shares on my logs.
Please can you check your log of your machine and compare it with result of explorer which showing the real time of generated blocks?Let me know here your results.
If you also have this huge delay, then for sure you have stale shares and lower profit .And i dont know why this strange problem is happening.Thanks.

[bjbitcoin]

Anybody know of a smart plug that can be used with this asic for 240v?  This way it can be turned on and off remotely.

[n1024829]

Anybody know of a smart plug that can be used with this asic for 240v?  This way it can be turned on and off remotely.

I'm using

https://www.tp-link.com/uk/home-networking/smart-plug/hs110/

[n1024829]

Does anyone know how to control the fan speed as they're always running at max.

I can see in Auto Stop Miner there are 3 settings which I assume are fan speed related, but I can't work out what they do, or what to set them as.
Lower Fanspeed(in):
Lower Fanspeed(out):
Higher Core Temperature:

[bjbitcoin]

Anybody know of a smart plug that can be used with this asic for 240v?  This way it can be turned on and off remotely.

I'm using

https://www.tp-link.com/uk/home-networking/smart-plug/hs110/

Is that European?  I am in the US.  I have the plug with two horizontal prongs

[Ruso21]

Anybody know of a smart plug that can be used with this asic for 240v?  This way it can be turned on and off remotely.

I'm using

https://www.tp-link.com/uk/home-networking/smart-plug/hs110/

Is that European?  I am in the US.  I have the plug with two horizontal prongs

i thought on that plug too, but i retracted because of some reviews in amazon.
is not recommended to use it as it is not for industrial application, could cause fire in time.

my ASIC is with 220v and melt 1 of my common adapter, then i changed the AC cable and all good to go. so imagine what could happen with that plug, let us know if something happens.

[n1024829]

I've not had any trouble with the tp-link plug, I had it running some different miners for a few months with no issues. It's handy to be able to keep track of the power.

I can't seem to connect via ssh, I just get

connect to host 192.168.1.118 port 22: Connection refused

any advise? Can you set these back to default settings? All the firmware links seem to only be applicable to writing USB pens, and not to a micro sd card.

[maximry]

Hello All i have same problem with 0 RPM but i have ZIG Z1 PRO is possible made firmware with chance to disable fan check
Thank you

I can advise you use NE555 schematic for cheating the Z1 Pro firmware. I use it and use big and quiet canal fan for cooling. Schematic very simple like this - https://forum.bits.media/index.php?/topic/86018-antminer-z9-mini/&do=findComment&comment=1603612 and canal fan Binetti FDS-150 - https://bt.rozetka.com.ua/benetti_fds_150/p32889159/?gclid=EAIaIQobChMInMamm4r35QIViOAYCh2tBgJeEAQYASABEgKhU_D_BwE . Also i use another one little schematic to control FDS-150 speed like this - https://ru.aliexpress.com/item/4000141348880.html?spm=a2g0o.productlist.0.0.695a2d24nTBdO9&algo_pvid=b93d3086-5645-469d-9f26-d632b7219b18&algo_expid=b93d3086-5645-469d-9f26-d632b7219b18-54&btsid=979f8bbd-1b54-4b3c-9d14-b19c1125fe74&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_52 and already ordered Wi-Fi dimmer for that fan. When i get it i will control fan speed remotely - https://ru.aliexpress.com/item/4000060437817.html?spm=a2g0s.9042311.0.0.5afb33ed6unt1Q . As for me i use speed lower then a half.

[maximry]

Anybody know of a smart plug that can be used with this asic for 240v?  This way it can be turned on and off remotely.

I use Broadlink SP3S with powermeter. Very usefull smart plug - https://ru.aliexpress.com/item/32826371447.html?spm=a2g0o.productlist.0.0.18d92b14R0YCod&algo_pvid=e676708f-6ab5-4bad-82c2-de54d680f97a&algo_expid=e676708f-6ab5-4bad-82c2-de54d680f97a-9&btsid=9fb768a3-acc4-484c-a289-7467e4b58234&ws_ab_test=searchweb0_0,searchweb201602_7,searchweb201603_52 . Monitoring current power usage and can calculate every day-week-month-year with 2 time zone. I use night and day zones for my local electricity costs calculation.

[maximry]

I've not had any trouble with the tp-link plug, I had it running some different miners for a few months with no issues. It's handy to be able to keep track of the power.

I can't seem to connect via ssh, I just get

connect to host 192.168.1.118 port 22: Connection refused

any advise? Can you set these back to default settings? All the firmware links seem to only be applicable to writing USB pens, and not to a micro sd card.

Unfortunately Z1 Pro firmware doesn't support SSH at all.

[hadi-dindar]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

[hadi-dindar]

I've not had any trouble with the tp-link plug, I had it running some different miners for a few months with no issues. It's handy to be able to keep track of the power.

I can't seem to connect via ssh, I just get

connect to host 192.168.1.118 port 22: Connection refused

any advise? Can you set these back to default settings? All the firmware links seem to only be applicable to writing USB pens, and not to a micro sd card.

you should be use linux os bro
and enable ssh first

[tumiswaluh]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

Someone is selling the fan for replace on online marketplace like amazon, try to find there

[tumiswaluh]

Hi,
I can only mine on Nicehash. I tried Zergpool, Ahashpool and Zpool. But after a while hash goes to 0. Nonce submit on/off makes no difference. Any ideas?
Thank you in advance.

hello, have you tried to mine on vippool.com ? i guess it much more stable hashrate if you mine there

[HagssFIN]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

If it is a 120x38 mm fan:
Delta QFR1212GHE is a good replacement fan.

If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.

[tumiswaluh]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

If it is a 120x38 mm fan:
Delta QFR1212GHE is a good replacement fan.

If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.

it seems another good suggestion, is it will have a trouble with fan if i using slot extension for additional fan in the other side ??

[HagssFIN]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

If it is a 120x38 mm fan:
Delta QFR1212GHE is a good replacement fan.

If it is a 140x38 mm fan:
You can try Sunon PFE0381BX-0000-A99.

it seems another good suggestion, is it will have a trouble with fan if i using slot extension for additional fan in the other side ??

I think you may face problems with that kind of a setup taking too much current from the 4-pin fan connectors in the control board.

The extension slot adapter cable wires may also be too thin for the total amount of current in such setup.

[maximry]

hi
i find a way foe control speed of zigminer z1 pro fan
with linux ssh

who can tell me replace fan for zigminer . i need a fan for replace . tell me which antminer machines fan are like z1pro ?

There is only one 140 mm and 12V Delta fan - PFM1412DEB7V . This is its datasheet - https://www.delta-fan.com/Download/Spec/PFM1412DEB7V.pdf

I thinks there is only one possible and good fan for Z1 Pro.