sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 14, 2021, 07:53:15 PM |
|
Did you try --xintensity 24?
You should upgrade to 1.25 so we can see the clocks and power settings.
|
|
|
|
nosidefcp
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 14, 2021, 11:27:16 PM |
|
so i have all my cards apart from 2 rx 580 working on TBM.
apart from the rx 5700, i have awesome results on 6700, 6800, 3080 and 2080 ti.
any xintensity and kernel value to use on the 5700 xt? the 580 i didnt try yet, but i cant get past 55/56 on TBM, when the card is making steady 57.5 on TRM
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 15, 2021, 06:23:54 AM Last edit: November 15, 2021, 09:32:41 AM by sp_ |
|
--xintensity 60 is good on the rx 580. ppl got it working in hiveos after upgrading to the latest image. And the winner is --xintensity 284
I did a 3hour * 4 test last night on 2miners.com on the same card. rtx 2060 mobile --xintensity 1024 32.54 mhash (pool less than 30) --xintensity 2048 32.56 mhash (pool 34++) --xintensity 3078 32.58 mhash (pool less than 30) --xintensity 4096 32.60 mhash (pool 38++) 3 hours on each intensity is not a long enough test, but 4096 was still the winner on this pool for NVIDIA... If you compare the local speed to the default (--xintensity 284) you get a +1% speedup. The test had no stales or rejected shares poolside.
|
|
|
|
ep690d01
Newbie
Offline
Activity: 21
Merit: 0
|
|
November 15, 2021, 10:38:35 AM |
|
--xintensity 60 is good on the rx 580. ppl got it working in hiveos after upgrading to the latest image. And the winner is --xintensity 284
I did a 3hour * 4 test last night on 2miners.com on the same card. rtx 2060 mobile --xintensity 1024 32.54 mhash (pool less than 30) --xintensity 2048 32.56 mhash (pool 34++) --xintensity 3078 32.58 mhash (pool less than 30) --xintensity 4096 32.60 mhash (pool 38++) 3 hours on each intensity is not a long enough test, but 4096 was still the winner on this pool for NVIDIA... If you compare the local speed to the default (--xintensity 284) you get a +1% speedup. The test had no stales or rejected shares poolside. It does not take 3 hours to get reliable information about pool hashrate, at least 24 hours
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 15, 2021, 11:36:16 AM |
|
It does not take 3 hours to get reliable information about pool hashrate, at least 24 hours
yes. If anyone wants to test they can do it now easy with the new --miningtime parameter. 576 minutes in 24 hours So set up the launch config with different --xintensities and use --miningtime 576 for a 24hour test (24*60) make sure to add --log as well. then you can check in the logfile for the results.
|
|
|
|
ep690d01
Newbie
Offline
Activity: 21
Merit: 0
|
|
November 15, 2021, 11:59:17 AM |
|
It does not take 3 hours to get reliable information about pool hashrate, at least 24 hours
yes. If anyone wants to test they can do it now easy with the new --miningtime parameter. 576 minutes in 24 hours So set up the launch config with different --xintensities and use --miningtime 576 for a 24hour test (24*60) make sure to add --log as well. then you can check in the logfile for the results. https://i.ibb.co/Fkr0516/tune-script.pngThanks for this very good option.
|
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 15, 2021, 07:42:41 PM Last edit: November 15, 2021, 07:54:01 PM by sp_ |
|
not close... but it's beyond the EST. REWARD by minerstat and whattomine Yeah. This software is pretty good, but only if you configure it correctly...
|
|
|
|
plavirudar
Jr. Member
Offline
Activity: 78
Merit: 4
|
|
November 15, 2021, 08:26:22 PM |
|
The front page post mentions that it supports socks5 proxy, but I could not find such an option on the readme flags list on github, or in the --help option list when starting the miner.
Interestingly enough, the --proxy option does allow the miner to start normally (other options cause the miner to exit with invalid option error), but the socks proxy connection is not used when that option is applied. If using a program like proxifier to redirect the connection into a socks proxy, the miner refuses to connect. This is unlike other miners that do not natively support proxies like teamredminer. I assume this is due to some anti devfee cheating mechanism.
It would be nice if the proxy can be enabled, or if not, at least remove it from the main post.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 15, 2021, 09:37:31 PM |
|
This is unlike other miners that do not natively support proxies like teamredminer. main post.
The other miners seem to use the same codebase because they behave the same. More hits on the antivirus software as well.. The Team Black miner is written from scratch by opensource developers... Proxy is supported in zil+etc and zil+eth miningmode. Mine at rustpool or shardpool.
|
|
|
|
plavirudar
Jr. Member
Offline
Activity: 78
Merit: 4
|
|
November 15, 2021, 11:23:13 PM |
|
Proxy is supported in zil+etc and zil+eth miningmode. Mine at rustpool or shardpool.
I see, thanks for the reply. Would be good if you could clarify the OP that the socks5 proxy is not for the pool connection but only for dual mining. Another question, the AMD device information (clocks, mem, temps etc) seems to be absent on a mixed nv/amd rig, even though I am using 1.25. I am running AMD driver 21.8.2 (showing as driver 539303.288 on startup) and it detects the 6800 as "GPU0 gfx1030 17GB added to miner as OpenCL device" Should I be using a different config for this?
|
|
|
|
Kolmodor
Newbie
Offline
Activity: 15
Merit: 0
|
|
November 16, 2021, 11:57:48 AM |
|
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 16, 2021, 12:28:13 PM |
|
Good Rtx 2060 yes. v1.25 is really fast. Spread the word..
|
|
|
|
Ramsete2
Jr. Member
Offline
Activity: 87
Merit: 5
|
|
November 16, 2021, 04:37:26 PM Last edit: November 16, 2021, 05:23:54 PM by Ramsete2 |
|
Still no stats on AMD cards... (ver 1.25) Sorry but do somebody test releases before submitting them?
eu.crazypool.org (ethash) PING: 26ms DIFFICULTY: 2.00 EPOCH: 454 ID BOARD TYPE KERN XINT TEMP FAN CORE MEM WATT GPU0 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU1 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU2 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU3 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU4 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU5 gfx1030 OpenCL 0 24 0/0 0 0 0 0 GPU6 gfx1030 OpenCL 0 24 0/0 0 0 0 0 0 ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES RATE GPU0 gfx1030 0.00 H/W 64.91 MH/s 63.93 MH/s 5/0/0 100.00% GPU1 gfx1030 0.00 H/W 45.57 MH/s 42.87 MH/s 1/0/0 100.00% GPU2 gfx1030 0.00 H/W 65.12 MH/s 63.97 MH/s 2/0/0 100.00% GPU3 gfx1030 0.00 H/W 65.14 MH/s 64.59 MH/s 0/0/0 100.00% GPU4 gfx1030 0.00 H/W 65.13 MH/s 64.52 MH/s 1/0/0 100.00% GPU5 gfx1030 0.00 H/W 65.14 MH/s 64.02 MH/s 1/0/0 100.00% GPU6 gfx1030 0.00 H/W 64.85 MH/s 63.90 MH/s 0/0/0 100.00% 0.00 H/W 435.86 MH/s 427.81 MH/s 10/0/0 100.00% SHARES PER MINUTE: 3.33 POOL HASHRATE: 477.21 MH/s
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 16, 2021, 06:12:48 PM |
|
Still no stats on AMD cards... (ver 1.25)
yes. Tested on the latest hiveos. We are using a library called rocm-smi. This is buildt into hiveos, but on other linux platforms might need to install it separately.
|
|
|
|
Ramsete2
Jr. Member
Offline
Activity: 87
Merit: 5
|
|
November 16, 2021, 06:55:18 PM |
|
Still no stats on AMD cards... (ver 1.25)
yes. Tested on the latest hiveos. We are using a library called rocm-smi. This is buildt into hiveos, but on other linux platforms might need to install it separately. Using mmpOS, which command should I use?
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 16, 2021, 08:04:04 PM |
|
Not sure. Why don't you ask in the MMPos thread. Did you use the latest version of mmpos? rocm-smi is normally included with the driver.
|
|
|
|
KillrBee
Jr. Member
Offline
Activity: 139
Merit: 3
|
|
November 17, 2021, 04:11:05 PM |
|
It's amazing!
My 6x00 series cards are all clocking over 66 MH/s at the pool on version 1.25 with HiveOS which is in real world terms an improvement of 3-4 MH/s per card over teamRedMiner. I haven't even experimented that much with the intensity values since these cards are incredibly sensitive to slight differences in voltages, core and memory clocks; they will either just start hashing at a low value or go offline without any details in the logs. I've found that --xintensity of 1042 and --kernel 5 have been able to produce a fairly stable hash rate without the cards yeeting themselves.
I've been experimenting with my 3090 and have been able to achieve a rock-solid at the pool hashrate of 134 with the following settings @ 2miners.com: --xintensity 15000, core 1560, memory +1450 (11202), 85%. This is equalling an average of 1 share per minute, which equates to about 135 MH/s at the pool right now.
Overall, my combined rig hashrate has moved from about 468 MH/s average to 502 MH/s; which is amazing and shows all the hard work that has gone into this software has really paid off for the mining community (and I hope for the Devs too!). I've seen and been involved with the progress that has been made since version 1.01 and we should all give a big shout out to binaryf and sp__ for keeping up an incredible release tempo and continuous improvement! I can't wait to see what's next!
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 17, 2021, 06:01:32 PM Last edit: November 17, 2021, 06:16:04 PM by sp_ |
|
A working semi LHR unlock has now been implemented. rtx 3060 32MHASH@50watt. Abit slower than the other teams but use very little power.
This new feature needs more tuning and testing, but v1.26 will be released soon.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
November 17, 2021, 06:11:45 PM |
|
Overall, my combined rig hashrate has moved from about 468 MH/s average to 502 MH/s; which is amazing and shows all the hard work that has gone into this software has really paid off for the mining community (and I hope for the Devs too!).
Thanks for your support and testing. The fee is picking up, but we have a long way to go. Hopefully the new semi LHR unlock feature will move more ppl over to the fastest miner.
|
|
|
|
|