⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW ZIL +dual +tripple mining )

[sp_]

So, 1.25 is working.  1.26 is working.  "The Latest" (not sure if it's +cuda or without cuda), is not working

In the latest version opencl has been disabled for nvidia. so the if you select amd devices with --cl-index you need to change the indexes.

Use tbminer --list-devices to find the correct indexthe pool url has to end with 2miners.com

so use
eth.2miners.com

and --port 2020

[KillrBee]

The repository you are linking from is from 2018.

I was in the team that made the first ethereum gpu miner. back in 2015. The Gateless Gate Sharp version seems to be a slightly modified version of the original kernel.
 

I know the history - because I was there. You did *not* write the GPLv3 code which you stole; it does not matter at all what other code you may have written in the miner. Also, I linked the code from the ethereum-mining repo, if you care to read - which originates from https://github.com/ethereum/aleth - which predates you. He did the real first Eth miner.

@sp_
https://i.imgur.com/BhLTtuS.mp4

So, 1.25 is working.  1.26 is working.  "The Latest" (not sure if it's +cuda or without cuda), is not working

In the latest version opencl has been disabled for nvidia. so the if you select amd devices with --cl-index you need to change the indexes.

Use tbminer --list-devices to find the correct index

It's all AMD and I explicitly use --amd-only to exclude the 1 Nvidia card I have in that machine from TBM

[sp_]

It's all AMD and I explicitly use --amd-only to exclude the 1 Nvidia card I have in that machine from TBM

Perhaps the --amd-only switch isn't working. Try to select --cl-devices manually

--cl-devices [0,1,2,3,4,5]

Use tbminer --list-devices to get the correct indexes.

[KillrBee]

It's all AMD and I explicitly use --amd-only to exclude the 1 Nvidia card I have in that machine from TBM

Perhaps the --amd-only switch isn't working. Try to select --cl-devices manually

--cl-devices [0,1,2,3,4,5]

Use tbminer --list-devices to get the correct indexes.

That's not it... I suspect that it probably has something to do with the stratum re-write and how HiveOS handles the pool connection.  It selects the pool and then injects it into the miner as %URL%, but if you're now expecting a different format, like 'stratum+tcp://%URL%' or whatever, and HiveOS isn't providing the correct values, there might be an issue. 

[wasarianta]

--kernel [5] --xintensity [4096] (no add --tweak and no add --dagintensity)

https://ibb.co/bXbbSvf

https://ibb.co/c2MGyhF

[sp_]

--kernel [5] --xintensity [4096] (no add --tweak and no add --dagintensity)

Pictures say more than words.

[MLong2]

Yes it said all... You said Pool 53 Mhs and is 50Mhs... where are this 3Mhs?

[sp_]

Yes it said all... You said Pool 53 Mhs and is 50Mhs... where are this 3Mhs?

The pool is the average of 6 hours, but he has only mined for 5:48 and the last accepted shares has not been added to the pool yet... The pool only refresh every 10minutes. So I expect the 50.50MHASH poolside hashrate comes from 5:30 minutes of mining

[dle378]

Is there any benefit in adding the dagintensity value if mining on miningpoolhub?

[pitroy]

pls change text color when dag fail verify.

[sp_]

Is there any benefit in adding the dagintensity value if mining on miningpoolhub?

The point of the --dagintensity 1 is to avoid crash on dag creation on high clockrates. You can oc the memory +100-200 or more with this setting on, but the dag generation will be slower. So not good in eth-zil mining. In v1.28 we will do an adjustemnt to the dag creation  with --dagintensity and make it slower.

[dle378]

Is there any benefit in adding the dagintensity value if mining on miningpoolhub?

The point of the --dagintensity 1 is to avoid crash on dag creation on high clockrates. You can oc the memory +100-200 or more with this setting on, but the dag generation will be slower. So not good in eth-zil mining. In v1.28 we will do an adjustemnt to the dag creation  with --dagintensity and make it slower.

Thanks for the explanation.

I am setting the dagintensity value to "9", is that considered too high of a number?

Also, I don't understand why I see so many negative posts about your miner software. I have tried testing on other miner software such as GMiner and T-Rex. After three + hours or so, I either get 1-2% rejected shares or the miner software ends up crashing.

Plus your level of support within the thread is top notch so you can't beat that!

Please keep up the great work. 

[sp_]

I am setting the dagintensity value to "9", is that considered too high of a number?

Thanks.

0 or 9 is the default setting for nvidia.

[Ramsete2]

I have tried testing on other miner software such as GMiner and T-Rex. After three + hours or so, I either get 1-2% rejected shares or the miner software ends up crashing.

Well, if you had problems on those rock solid miners there is something wrong with your setup/OC.

[dle378]

I have tried testing on other miner software such as GMiner and T-Rex. After three + hours or so, I either get 1-2% rejected shares or the miner software ends up crashing.

Well, if you had problems on those rock solid miners there is something wrong with your setup/OC.

I won't disagree with you on that.

I'll probably need to spend more time troubleshooting/modifying my OC settings that would adhere stability to each individual miner software.

[sp_]

v1.28 will have improved performance for amd cards on ETH+ZIL (dagger cache). We have also added the possibility to mine to ip adresses directly instead of hostnames.

[swogerino]

v1.28 will have improved performance for amd cards on ETH+ZIL (dagger cache). We have also added the possibility to mine to ip adresses directly instead of hostnames.

I just tried 1.27 and it directly crashed out,to make a long story short I need the ETH+ZIL bat file,or you can write it down here so I can give it another try,all other miners are crashing after a certain amount of time so at least I will win some more Mhsh with your miner and I am ready to make the switch.Maybe you have put it somewhere here in the thread as I asked already a long time ago but now I am ready to make the switch and see what happens.My cards are 2 RX 6800 XT and 1 GTX 1080 ti in this rig.Thank you.

I mean for Ezil.me pool I didn't see a bat for that.

[sp_]

Set ETH_WALLET=(ethereum wallet)
Set ZIL_WALLET=(zil wallet)

:loop
   TBMiner --algo ethash --hostname eu.ezil.me --port 5555 --wallet %ETH_WALLET%.%ZIL_WALLET% --worker-name %computername% --dagintensity 1 --kernel 0
   timeout 10
goto :loop

Use the pill in the backround for the 1080ti.

[swogerino]

I got this error here in the picture below.

[sp_]

Run the ansicolor.reg script in the 7zip archive to activate colors in Windows program console.

Your driver is only cuda 11.1 compatible so you need to install the latest driver. Download from nvidia

https://github.com/sp-hash/TeamBlackMiner/blob/main/INSTALL_WINDOWS.md