CgminerMonitor.com - cloud monitor for all your miners!

[pjcltd]

Thanks guys for your input. To sum up, there should be possibility to:
-share only dashboard for only one worker
-share all statistics of one worker
-share only dashboard for all workers

Is this correct?

sound good to me

[1715002295]

1715002295

[Dophoeve]

For now, yes that would be great!

[siggy]

Is there any way to run the client on one machine, and have it connect to cgminer on another?  (( Miners are all running thru a stratum proxy and don't have direct access to the internet ))

Yes, I do realize this will make it unable to get machine stats and only get cgminer API info.. I'm good with that.

thanks,
Sigg

Edit:  Thinking about it some more... having the ability for a single client to monitor multiple cgminer instances on multiple machines would be really sweet

[cgminermonitor]

Is there any way to run the client on one machine, and have it connect to cgminer on another?  (( Miners are all running thru a stratum proxy and don't have direct access to the internet ))

Yes, I do realize this will make it unable to get machine stats and only get cgminer API info.. I'm good with that.

thanks,
Sigg

Edit:  Thinking about it some more... having the ability for a single client to monitor multiple cgminer instances on multiple machines would be really sweet

What do you think about possibility to specify miner's IP in config? You would be able to run multiple instances of CgminerMonitorClient by specyfing different config files. Proof of concept script for monitoring multiple miners would look like this:

Code:

screen -r miner1 -dm CgminerMonitorClientX64Linux -configFile=miner1.config
screen -r miner2 -dm CgminerMonitorClientX64Linux -configFile=miner2.config
screen -r miner3 -dm CgminerMonitorClientX64Linux -configFile=miner3.config

However, some future features might not work in remote mode.

[cgminermonitor]

its ok i fixed it

But
will this work on a Ras Pi?

Hey again! Now it's confirmed - it's working on Raspberry PI! However, you have to compile it from source - which is extremely simple. Just follow the instructions here: http://cgminermonitor.com/GetStarted -> Install HOWTO -> Compile from source

[cgminermonitor]

@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now

[pjcltd]

@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now

Good stuff
its working for me
http://cgminermonitor.com/Shared/9d6f9258cf3648e6ba06ccde947e630e1

[cgminermonitor]

@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now

Good stuff
its working for me
http://cgminermonitor.com/Shared/9d6f9258cf3648e6ba06ccde947e630e1

I see that you have zeros in max indicator - zero for max temperature and zero for max fan percents. Quick fix and you don't have ugly zeros anymore.
Glad you like it!
BTW. Nice miner you have there...

[pjcltd]

@Dophoeve, @pjcltd and others: share feature is done!
You can share your whole dashboard or just dashboard of one miner. For example, here are my private miners: http://cgminermonitor.com/Shared/da5cbaed907a425fb56be08f8a5daa0b0

Full share of one miner is still under development - due to some problems it will be available much later...
Hope that dashboard share is good for now

Good stuff
its working for me
http://cgminermonitor.com/Shared/9d6f9258cf3648e6ba06ccde947e630e1

I see that you have zeros in max indicator - zero for max temperature and zero for max fan percents. Quick fix and you don't have ugly zeros anymore.
Glad you like it!
BTW. Nice miner you have there...

thanks for the fix
i have 32 Greedseed miners
my other rig has 3 Gridseed blades but its not up yet im still rebuilding it
keep up the good work

[Dophoeve]

Thanks! It is also working for me:

http://cgminermonitor.com/Shared/081c875ea38b43daa1d97066bf5325f80

Great work:D

[pjcltd]

Hi
i have upgraded my miners to Gridseed blades but i can see that they are alive but I'm not getting the speed

http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

Blademiner1 should be around 25Mh/s

Blademiner2 should be around 5.2Mh/s



thanks

[cgminermonitor]

Hi
i have upgraded my miners to Gridseed blades but i can see that they are alive but I'm not getting the speed

http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

Blademiner1 should be around 25Mh/s

Blademiner2 should be around 5.2Mh/s



thanks

Thanks pjcltd for reporting that. I'll investigate the issue and let you know about results.

[pjcltd]

Hi
i have upgraded my miners to Gridseed blades but i can see that they are alive but I'm not getting the speed

http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

Blademiner1 should be around 25Mh/s

Blademiner2 should be around 5.2Mh/s



thanks

Thanks pjcltd for reporting that. I'll investigate the issue and let you know about results.

no problem they should both be around 15mh/s now

[cgminermonitor]

no problem they should both be around 15mh/s now

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

[pjcltd]

no problem they should both be around 15mh/s now

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

Hi i have downloaded the new client and installed / ran it the same way with the extra option but it did nothing apart from send the data to the website 

what did i do wrong

[cgminermonitor]

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

Hi i have downloaded the new client and installed / ran it the same way with the extra option but it did nothing apart from send the data to the website 

what did i do wrong

I am very sorry, I haven't gave you precise instructions. Be sure to run it with extra parameter like this:

Code:

./CgminerMonitorClientX64Linux -dumpFile=blademinerissue

then the file blademinerissue should be created.

[pjcltd]

I've just published new client version. Could you update the client and send me the dump file, which will be created after running new client with parameter: dumpFile=blademinerissue.txt? As always, you can download the new version from here: http://cgminermonitor.com/GetStarted

Hi i have downloaded the new client and installed / ran it the same way with the extra option but it did nothing apart from send the data to the website 

what did i do wrong

I am very sorry, I haven't gave you precise instructions. Be sure to run it with extra parameter like this:

Code:

./CgminerMonitorClientX64Linux -dumpFile=blademinerissue

then the file blademinerissue should be created.

Hi o k i did this but all i get is this

./CgminerMonitorClientX86Custom -dumpFile=blademinerissue

Unhandled Exception: NDesk.Options.OptionException: Cannot bundle unregistered option '-u'.
  at NDesk.Options.OptionSet.ParseBundledValue (System.String f, System.String n, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (System.String argument, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (IEnumerable`1 arguments) [0x00000] in <filename unknown>:0
  at CgminerMonitorClient.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0
[ERROR] FATAL UNHANDLED EXCEPTION: NDesk.Options.OptionException: Cannot bundle unregistered option '-u'.
  at NDesk.Options.OptionSet.ParseBundledValue (System.String f, System.String n, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (System.String argument, NDesk.Options.OptionContext c) [0x00000] in <filename unknown>:0
  at NDesk.Options.OptionSet.Parse (IEnumerable`1 arguments) [0x00000] in <filename unknown>:0
  at CgminerMonitorClient.Program.Main (System.String[] args) [0x00000] in <filename unknown>:0


thanks
Paul

[cgminermonitor]

I managed to fix missing hash speed without bothering you with dumps. Your dashboard looks much more cooler now: http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

[pjcltd]

I managed to fix missing hash speed without bothering you with dumps. Your dashboard looks much more cooler now: http://cgminermonitor.com/Shared/3478e7c38ba04ac2ba30e5765dcb4d6a0

yes it dose
Thanks for fixing this

When will your nxt update be ready
Miner controle

[cgminermonitor]

When will your nxt update be ready
Miner controle

Around the end of the next week