The Official Mastercoin Foundation, Master Protocol & Mastercoin Thread

[mcjavar]

How can I send MSAFE from one address (in blockchain currently) to another when I´m using windows? I was checking out omniwallet, but for me it seems that that´s only working with linux. Right?

Omniwallet works with windows.

You cannot use QT or blockchain.info to send MSAFE.

Import your address into Omniwallet.

Si I need to use the webwallet in this case, right?

And mybe you alse have a solution for this problem:

EDIT: Accordint to the Google Spreadsheet I should have around 77k MSAFe on this address: 1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd
Now, according to test.omniwallet.org there is 0.

I´ve sent my investment in the very beginning of the ipo.

[1713577449]

1713577449

[stereotype]

How can I send MSAFE from one address (in blockchain currently) to another when I´m using windows? I was checking out omniwallet, but for me it seems that that´s only working with linux. Right?

Omniwallet works with windows.

You cannot use QT or blockchain.info to send MSAFE.

Import your address into Omniwallet.

Si I need to use the webwallet in this case, right?

And mybe you alse have a solution for this problem:

EDIT: Accordint to the Google Spreadsheet I should have around 77k MSAFe on this address: 1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd
Now, according to test.omniwallet.org there is 0.

I´ve sent my investment in the very beginning of the ipo.

That address returns a current balance of 53524MSAFE that were sent to you 8 hours ago ......
https://masterchest.info/lookupadd.aspx?address=1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd

You need to import the private key for the above address into Omni. for the balance to update.

[stereotype]

Devs

This tx is not updating the Omniwallet (still same balance after sending 10000msafe) ......
https://blockchain.info/tx/b70cda2ff19888216a8081063e679998c8d4833a04fbad15fcef62b9d126bf88

Also, i couldnt send more than 10000msafe for some reason. Told me to check balance, but i had enough? I got confused by displayed format.

Cheers

EDIT: This tx is not showing in Omni also?..... https://blockchain.info/tx/33dcf83493b90fd4be9b90d831d53190ff6304c6b5e844b953838402c2f2c72d

[mcjavar]

How can I send MSAFE from one address (in blockchain currently) to another when I´m using windows? I was checking out omniwallet, but for me it seems that that´s only working with linux. Right?

Omniwallet works with windows.

You cannot use QT or blockchain.info to send MSAFE.

Import your address into Omniwallet.

Si I need to use the webwallet in this case, right?

And mybe you alse have a solution for this problem:

EDIT: Accordint to the Google Spreadsheet I should have around 77k MSAFe on this address: 1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd
Now, according to test.omniwallet.org there is 0.

I´ve sent my investment in the very beginning of the ipo.

That address returns a current balance of 53524MSAFE that were sent to you 8 hours ago ......
https://masterchest.info/lookupadd.aspx?address=1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd

You need to import the private key for the above address into Omni. for the balance to update.

Thank you. Omniwallet says that it will delete all existing data once it is out of beta testing
"When Omniwallet is "launched" (moved from "Alpha" to "Beta"), it is our expectation that ALL EXISTING USER DATA WILL BE DELETED!"

Does this mean that my address will get lost, or I will still be able to access it from blockchain as I also have it in there with the private key?

[stereotype]

How can I send MSAFE from one address (in blockchain currently) to another when I´m using windows? I was checking out omniwallet, but for me it seems that that´s only working with linux. Right?

Omniwallet works with windows.

You cannot use QT or blockchain.info to send MSAFE.

Import your address into Omniwallet.

Si I need to use the webwallet in this case, right?

And mybe you alse have a solution for this problem:

EDIT: Accordint to the Google Spreadsheet I should have around 77k MSAFe on this address: 1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd
Now, according to test.omniwallet.org there is 0.

I´ve sent my investment in the very beginning of the ipo.

That address returns a current balance of 53524MSAFE that were sent to you 8 hours ago ......
https://masterchest.info/lookupadd.aspx?address=1AW7hAkodXq6TCQuSaP5A1MbiCPhoixUmd

You need to import the private key for the above address into Omni. for the balance to update.

Thank you. Omniwallet says that it will delete all existing data once it is out of beta testing
"When Omniwallet is "launched" (moved from "Alpha" to "Beta"), it is our expectation that ALL EXISTING USER DATA WILL BE DELETED!"

Does this mean that my address will get lost, or I will still be able to access it from blockchain as I also have it in there with the private key?

Thats a Dev question, that goes over my head. 

[richwang]

Welcome to the official Mastercoin Foundation thread where all things related to the Master Protocol and Mastercoin are discussed. If you have a question feel free to post it and one of our team members will get back to you.

RULES: Absolutely NO TROLLING on this thread.  No name calling, no vulgar language or unsubstantiated accusations that would be meant to defame any person or organization.  Any post that does not follow these rules will be deleted without question. 

Below is a comprehensive list of resources to help you better find the answers you seek.

Do you have a question that needs our immediate attention? Please visit http://www.mastercoin.org and click the support button on the top left side of the page to file a ticket.

Mastercoin Wallets: http://www.mastercoinwallets.org

Learn how to install the Masterchest Windows Wallet: http://masterprotocoleducation.org/how-to-install-the-masterchest-windows-wallet/

Master Protocol Blog: http://blog.mastercoin.com/

Master Protocol Education: http://masterprotocoleducation.org/

Master Protocol Code: http://wiki.mastercoin.org/index.php/Github_Repositories

Master Protocol Specification: https://github.com/mastercoin-MSC/spec

Master Protocol Wiki: http://wiki.mastercoin.org/index.php/Main_Page

Master Protocol FAQ: http://wiki.mastercoin.org/index.php/FAQ

Dev Project Boards: http://wiki.mastercoin.org/index.php/Developer_project_boards

Verification API: http://wiki.mastercoin.org/index.php/Verification_API_endpoints

Wallet Exchange Integration:
http://wiki.mastercoin.org/index.php/Exchange_%26_Wallet_Integration_Guide

The Emerging Wave of Decentralized Applications (White Paper)
https://github.com/DavidJohnstonCEO/DecentralizedApplications/blob/master/README.md

[Olimpiata]

Is it not possible to use the mastercoin adviser command line application, with currency code 3, to send MSAFE via QT or similar?

[mcjavar]

"To deposit Maidsafecoins send them from 15sqMhaX84WX9RSG2oESuiyMYY9TAs36kd to 1MaStErt4XsYHPwfrN9TpgdURLhHTdMenH"

so where do I need to send them if they are on a different address? Do I need to send it to the first or to the second address? This is quite confusing.

[stereotype]

"To deposit Maidsafecoins send them from 15sqMhaX84WX9RSG2oESuiyMYY9TAs36kd to 1MaStErt4XsYHPwfrN9TpgdURLhHTdMenH"

so where do I need to send them if they are on a different address? Do I need to send it to the first or to the second address? This is quite confusing.

If you no longer have control of the above sending address, and cant therefore send to it (and then send on to masterxchange), you will need to send masterxchange an email. Speak to Adrien, as he knows the problem, and is going to change the process soon (option to change and/or have multiple sending addresses).

Agreed, its currently a challenge and a headfuck to fully understand. Onwards and upwards eh! 

[stereotype]

All my tx's have now reached their destinations, and Omniwallet now shows correct amounts.

Good work all. 

[mcjavar]

"To deposit Maidsafecoins send them from 15sqMhaX84WX9RSG2oESuiyMYY9TAs36kd to 1MaStErt4XsYHPwfrN9TpgdURLhHTdMenH"

so where do I need to send them if they are on a different address? Do I need to send it to the first or to the second address? This is quite confusing.

If you no longer have control of the above sending address, and cant therefore send to it (and then send on to masterxchange), you will need to send masterxchange an email. Speak to Adrien, as he knows the problem, and is going to change the process soon (option to change and/or have multiple sending addresses).

Agreed, its currently a challenge and a headfuck to fully understand. Onwards and upwards eh! 

That address is in my mastercoin wallet. The problem there is, that I can´t see ANY msafecoins, only mastercoin, bitcoin and testmastercoin. I just downloaded the new version of the wallet today. Why is there no MSAFE in the list?

[udecker]

"To deposit Maidsafecoins send them from 15sqMhaX84WX9RSG2oESuiyMYY9TAs36kd to 1MaStErt4XsYHPwfrN9TpgdURLhHTdMenH"

so where do I need to send them if they are on a different address? Do I need to send it to the first or to the second address? This is quite confusing.

If you no longer have control of the above sending address, and cant therefore send to it (and then send on to masterxchange), you will need to send masterxchange an email. Speak to Adrien, as he knows the problem, and is going to change the process soon (option to change and/or have multiple sending addresses).

Agreed, its currently a challenge and a headfuck to fully understand. Onwards and upwards eh! 

That address is in my mastercoin wallet. The problem there is, that I can´t see ANY msafecoins, only mastercoin, bitcoin and testmastercoin. I just downloaded the new version of the wallet today. Why is there no MSAFE in the list?

Masterchest Wallet 0.3C does not support Smart Property.  Version 0.4 will be released soon that does support balances (and sending) of Smart Properties.

[ejinte]

Thank you. Omniwallet says that it will delete all existing data once it is out of beta testing
"When Omniwallet is "launched" (moved from "Alpha" to "Beta"), it is our expectation that ALL EXISTING USER DATA WILL BE DELETED!"

Does this mean that my address will get lost, or I will still be able to access it from blockchain as I also have it in there with the private key?

Yes you will just need to put your privet key into omniwallet once again. Your bitcoin address will not disappear.

[stereotype]

Thank you. Omniwallet says that it will delete all existing data once it is out of beta testing
"When Omniwallet is "launched" (moved from "Alpha" to "Beta"), it is our expectation that ALL EXISTING USER DATA WILL BE DELETED!"

Does this mean that my address will get lost, or I will still be able to access it from blockchain as I also have it in there with the private key?

Yes you will just need to put your privet key into omniwallet once again. Your bitcoin address will not disappear.

Probably a good time to remind people to always perform a backup of their wallets. In fact, its good practice to test the backup process when you first start using a new wallet by logging out, logging back in and reloading the JSON or text backup of any wallet, before full use.

[richwang]

When will my Maid safecoin chaned to safecoin?
and when will safecoin be listed on Crptysy or Mintpal?

[BldSwtTrs]

How do we send MSAFE using omniwallet? The wallet doesn't even recognize my MSAFE.

[prophetx]

How do we send MSAFE using omniwallet? The wallet doesn't even recognize my MSAFE.

yea it does.

btw anyone know how msafe can be traded  with bitcoin once it becomes safecoin??  I assume some new interface will need to be built into the network.

[prophetx]

When will my Maid safecoin chaned to safecoin?
and when will safecoin be listed on Crptysy or Mintpal?

people need to organize and ask for it.  no such thing as a free lunch folks.

[BldSwtTrs]

How do we send MSAFE using omniwallet? The wallet doesn't even recognize my MSAFE.

yea it does.

No it doesn't.

Masterchest recognizes my MSAFE but not omniwallet.

[dexX7]

How do we send MSAFE using omniwallet? The wallet doesn't even recognize my MSAFE.

yea it does.

No it doesn't.

Masterchest recognizes my MSAFE but not omniwallet.

Did you look under "my addresses"? If it's not there, please send me your address (via PM).