PiMP OS is the fastest and easiest way to mine ALL crypto currencies!

[badman74]

you might check out my modded sgminer at https://github.com/badman74/sph-sgminer/tree/algo
it has scrypt, nscrypt, scrypt-jane, darkcoin, qubitcoin, myriadcoin-groestl, quarkcoin, fuguecoin, inkcoin, animecoin, groestlcoin, sifcoin and twecoin
all in one miner.
just check readme.md and /doc/configuration.md for info

Sounds great, I'd like to do this but is there any way you could take me (us) by the hand and tell step by step how to implement this in PIMP, with still being able to use it with all functions including the PoolManager?

really just replace sgminer or sph-sgminer with mine then use --algorithm to set the desired algo and -k for the different scrypt kernels

algo's: scrypt, nscrypt, scrypt-jane, darkcoin, qubitcoin, myriadcoin-groestl, quarkcoin, fuguecoin, inkcoin, animecoin, groestlcoin, sifcoin, twecoin, and maurcoin
scrypt kernels: alexkarnew, alexkarold, ckolivas, psw, zuikkis

and for the cpu coin diff problems, most are fine but if you get low diff shares or the diff seems way too high you can use --difficulty-multiplier to manually set the multiplier
the 3 settings are 256, 1.0, and 0.0039062500 (1/256)
if you get low shares the try 1 or 256
if too large the 1 or 0.0039062500

most of the time you wont need this though

to install to an existing pimp installation

nano sph-sgminer.sh
then put this in the file

Code:

cd /opt/
rm -frv sph-sgminer
git clone git://github.com/badman74/sph-sgminer.git
cd sph-sgminer
cp -av ../ADL-SDK/*.h ADL_SDK
autoreconf -fvi
./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed
make

ctrl+x to close the file and hit y when asked
then chmod +x sph-sgminer.sh
and finally ./sph-sgminer.sh

[DonQuijote]

Does anyone have the default settings scrypt-n?

[btcpoland]

Just a quick question: do I need to setup settings for GPUs (I have r9 280x)? Or are they preconfigured in system and I do not have to do anything about it (things like core, memory, thread concurency, intensity etc.)?

Another one: is this BAMT based? Do I get standard linux desktop / menus to setup IPs? I do not have DHCP, I need to add IP to my rig manually.

Thanks in advance.

[Spoetnik]

so you grabbed a collection of previously copyrighted open source free programs and copyrighted them again after bundling them ?
let me know how that works out for ya

[_r2h]

so you grabbed a collection of previously copyrighted open source free programs and copyrighted them again after bundling them ?
let me know how that works out for ya

You do some serious trolling on this board.  I've seen your username frickin 12 times tonight, and not a single time have you added value to any thread.

[dragonmike]

Hi!
I'm getting a Segmentation fault when using kernel zuikkis... So miner doesn't start. Any idea?

[Billyboy402]

sorry to be a noob with linux

but could you please add some link  or in pimp FAQ  how to install different miner

I would love it if you could install the NAN PTS miner  ( also for NRS)
https://www.dropbox.com/sh/na6m711qbca35gy/faSXN2XHZX

I have a ruff idea how to do it with command  and with putty ( after playing with cloud mining and VPS  ) but would rather a simple desktop  icon  to click and start

ps i am willing to offer a small donation if some one could help me .

[phunixx]

I cant get pimp to mine GROESTLCOIN.....
Changed profile to GROESTL, but i dont get any hashes....

[JamesR1]

How do I replace a bamt installation with pimp?
I've plugged in my usb back into my windows machine, but I can't access the drive.
I probably need to wipe it, sd formatter doesn't recognize the usb drive, but  bootice does.

Has anyone got any proper instructions. Or a better method.

[itraxe]

nice platform will test it soon

[Billyboy402]

Could some on help me out why i cant get PIMP to run on h81 BTC pro board - it work fine when i run without GPU, plug in GPU with usb riser and  the load screen loads, ( select to start pimp or start save mode)   then it start loading to ram , then turn off , - Like i said it work prefect in the same usb and port  without GPU but crash when  plug in the GPU ( Rig work fine with windows miner)

[Kenta]

I overwrote my LTCRabbit-station-usb with PiMP yesterday evening, because it kept bringing the GPU's into standby mode, and it immediately worked since first boot! A few minutes later I changed it to mining Darkcoin at and it surprised me by giving me a higher WU than I have ever been able to tweak from those graphic cards on my Windows computer.

I'll be following you from now.

Thanks for PiMP! 

(yes, I'll donate a few hashes every now and then)

[Blazed]

Just moved around 20 rigs onto PiMP from BAMT and it is working great.  Really excited to have some complete farm control in the near future!

[Kenta]

How can I configure my gridseed miners in PiMP?
I tried to connect them but nothing gets detected.

[chrissibel]

Hi everyone, can someone please help me with my sgminer config for darkcoin or other x11 coins. I have 2 Radeon R9 290's using the latest PiMP OS.

Here is what I currently have set but I only seem to get about 2.2Mh/s per card when i see other people able to get 2.5Mh/s:

"auto-fan" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "0",
"shaders" : "0",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-engine" : "0",
"gpu-memclock" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.00",
"gpu-fan" : "40-100",
"temp-hysteresis" : "3",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "80",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"expiry" : "20",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "darkcoin"


Thanks!

[Kenta]

Hi everyone, can someone please help me with my sgminer config for darkcoin or other x11 coins. I have 2 Radeon R9 290's using the latest PiMP OS.

Here is what I currently have set but I only seem to get about 2.2Mh/s per card when i see other people able to get 2.5Mh/s:

"auto-fan" : true,
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "0",
"shaders" : "0",
"api-listen" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-engine" : "0",
"gpu-memclock" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.00",
"gpu-fan" : "40-100",
"temp-hysteresis" : "3",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "80",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"expiry" : "20",
"scan-time" : "60",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"kernel" : "darkcoin"


Thanks!

Try to increase your "gpu-threads" to 2 or 4. First with a much lower intensity (13), then increase it gradually again while monitoring that you don't get any HW errors.

Another thing that did it for me was setting the "gpu-engine" to 947 and "gpu-memclock" to 1250, but this is specific for my card and you might want to have a look at https://litecoin.info/Mining_hardware_comparison to get an idea about tweaks for your card.

It's a good idea to SSH (with Putty if you're on Windows) into the rig to adjust the intensity live, as in without rebooting.

Send me a Datoshi if I helped 
XefoKFuuZRCm1TFUJwnjZV2N7TP2rprFJM

[crazycoin]

Hi,

thanks for Pimp. Great work.

Would somebody explain, how to increase default partition? For example, if I write image to 16Gb USB, how can I convert first partition to increase size. For example, in order to install some wallets, or file manager (for example Nautilus)... or some additional miner (e.g. Nan)

[crazycoin]

Please, help me. I used to run Pimp without any problems. Now I am having issues with two rigs, both running Gigabyte 270 cards on Biostar HB61 mobo.

Basically Pimp gets booted in text mode. On exact same computer using exact same USB stick, it no longer boots in graphical mode. The only thin that I have touched was UTP cable that I have change from one switch to the other router. But even if I switch cable back, Pimp stays in the same text mode.

[savale]

PIMPED my rigs for a while and will donate some more soon.

would love to see some extra mining kernels added in the : blake / x13 (although it's quite easy doing it myself)

[zyebu]

Cant start PIMP.
Says failed to start code 4 what to do?