badman74
|
|
April 14, 2014, 09:36:28 PM Last edit: April 17, 2014, 12:58:03 AM by badman74 |
|
you might check out my modded sgminer at https://github.com/badman74/sph-sgminer/tree/algoit has scrypt, nscrypt, scrypt-jane, darkcoin, qubitcoin, myriadcoin-groestl, quarkcoin, fuguecoin, inkcoin, animecoin, groestlcoin, sifcoin and twecoin all in one miner. just check readme.md and /doc/configuration.md for info Sounds great, I'd like to do this but is there any way you could take me (us) by the hand and tell step by step how to implement this in PIMP, with still being able to use it with all functions including the PoolManager? really just replace sgminer or sph-sgminer with mine then use --algorithm to set the desired algo and -k for the different scrypt kernels algo's: scrypt, nscrypt, scrypt-jane, darkcoin, qubitcoin, myriadcoin-groestl, quarkcoin, fuguecoin, inkcoin, animecoin, groestlcoin, sifcoin, twecoin, and maurcoin scrypt kernels: alexkarnew, alexkarold, ckolivas, psw, zuikkis and for the cpu coin diff problems, most are fine but if you get low diff shares or the diff seems way too high you can use --difficulty-multiplier to manually set the multiplier the 3 settings are 256, 1.0, and 0.0039062500 (1/256) if you get low shares the try 1 or 256 if too large the 1 or 0.0039062500 most of the time you wont need this though to install to an existing pimp installation nano sph-sgminer.shthen put this in the file cd /opt/ rm -frv sph-sgminer git clone git://github.com/badman74/sph-sgminer.git cd sph-sgminer cp -av ../ADL-SDK/*.h ADL_SDK autoreconf -fvi ./configure CFLAGS="-O2 -Wall -march=native" --enable-opencl --enable-gridseed make ctrl+x to close the file and hit y when asked then chmod +x sph-sgminer.shand finally ./sph-sgminer.sh
|
|
|
|
DonQuijote
Legendary
Offline
Activity: 1551
Merit: 1002
♠ ♥ ♣ ♦ < ♛♚&#
|
|
April 24, 2014, 04:37:28 PM |
|
Does anyone have the default settings scrypt-n?
|
THE INGENIOUS GENTLEMAN DON QUIXOTE OF LA MANCHA
|
|
|
btcpoland
|
|
April 27, 2014, 07:56:49 PM |
|
Just a quick question: do I need to setup settings for GPUs (I have r9 280x)? Or are they preconfigured in system and I do not have to do anything about it (things like core, memory, thread concurency, intensity etc.)?
Another one: is this BAMT based? Do I get standard linux desktop / menus to setup IPs? I do not have DHCP, I need to add IP to my rig manually.
Thanks in advance.
|
|
|
|
Spoetnik
Legendary
Offline
Activity: 1540
Merit: 1011
FUD Philanthropist™
|
|
April 28, 2014, 04:32:49 AM |
|
so you grabbed a collection of previously copyrighted open source free programs and copyrighted them again after bundling them ? let me know how that works out for ya
|
FUD first & ask questions later™
|
|
|
_r2h
Member
Offline
Activity: 63
Merit: 10
|
|
April 28, 2014, 05:33:36 AM |
|
so you grabbed a collection of previously copyrighted open source free programs and copyrighted them again after bundling them ? let me know how that works out for ya You do some serious trolling on this board. I've seen your username frickin 12 times tonight, and not a single time have you added value to any thread.
|
|
|
|
dragonmike
|
|
April 29, 2014, 05:18:05 PM |
|
Hi! I'm getting a Segmentation fault when using kernel zuikkis... So miner doesn't start. Any idea?
|
|
|
|
Billyboy402
|
|
April 30, 2014, 12:54:35 AM |
|
sorry to be a noob with linux but could you please add some link or in pimp FAQ how to install different miner I would love it if you could install the NAN PTS miner ( also for NRS) https://www.dropbox.com/sh/na6m711qbca35gy/faSXN2XHZXI have a ruff idea how to do it with command and with putty ( after playing with cloud mining and VPS ) but would rather a simple desktop icon to click and start ps i am willing to offer a small donation if some one could help me .
|
THIS ACCOUNT WAS HACK > SORRY FOR ANY ONE THAT HAS DEALT WITH THIS ACCOUNT.
|
|
|
phunixx
Member
Offline
Activity: 121
Merit: 10
|
|
May 04, 2014, 09:56:19 AM |
|
I cant get pimp to mine GROESTLCOIN..... Changed profile to GROESTL, but i dont get any hashes....
|
|
|
|
JamesR1
|
|
May 05, 2014, 01:36:59 PM |
|
How do I replace a bamt installation with pimp? I've plugged in my usb back into my windows machine, but I can't access the drive. I probably need to wipe it, sd formatter doesn't recognize the usb drive, but bootice does.
Has anyone got any proper instructions. Or a better method.
|
|
|
|
itraxe
Sr. Member
Offline
Activity: 264
Merit: 252
alt coins trader/miner.
|
|
May 06, 2014, 01:39:45 PM |
|
nice platform will test it soon
|
|
|
|
Billyboy402
|
|
May 12, 2014, 02:41:59 AM |
|
Could some on help me out why i cant get PIMP to run on h81 BTC pro board - it work fine when i run without GPU, plug in GPU with usb riser and the load screen loads, ( select to start pimp or start save mode) then it start loading to ram , then turn off , - Like i said it work prefect in the same usb and port without GPU but crash when plug in the GPU ( Rig work fine with windows miner)
|
THIS ACCOUNT WAS HACK > SORRY FOR ANY ONE THAT HAS DEALT WITH THIS ACCOUNT.
|
|
|
Kenta
|
|
May 12, 2014, 09:37:43 AM |
|
I overwrote my LTCRabbit-station-usb with PiMP yesterday evening, because it kept bringing the GPU's into standby mode, and it immediately worked since first boot! A few minutes later I changed it to mining Darkcoin at and it surprised me by giving me a higher WU than I have ever been able to tweak from those graphic cards on my Windows computer. I'll be following you from now. Thanks for PiMP! (yes, I'll donate a few hashes every now and then)
|
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
May 14, 2014, 02:51:23 PM |
|
Just moved around 20 rigs onto PiMP from BAMT and it is working great. Really excited to have some complete farm control in the near future!
|
|
|
|
Kenta
|
|
May 14, 2014, 07:00:48 PM |
|
How can I configure my gridseed miners in PiMP? I tried to connect them but nothing gets detected.
|
|
|
|
chrissibel
Sr. Member
Offline
Activity: 336
Merit: 250
Got Crypto?
|
|
May 15, 2014, 04:56:14 AM |
|
Hi everyone, can someone please help me with my sgminer config for darkcoin or other x11 coins. I have 2 Radeon R9 290's using the latest PiMP OS.
Here is what I currently have set but I only seem to get about 2.2Mh/s per card when i see other people able to get 2.5Mh/s:
"auto-fan" : true, "intensity" : "20", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "40-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "80", "log" : "5", "no-pool-disable" : true, "queue" : "1", "expiry" : "20", "scan-time" : "60", "shares" : "0", "kernel-path" : "/usr/local/bin", "kernel" : "darkcoin"
Thanks!
|
|
|
|
Kenta
|
|
May 15, 2014, 08:28:41 AM |
|
Hi everyone, can someone please help me with my sgminer config for darkcoin or other x11 coins. I have 2 Radeon R9 290's using the latest PiMP OS.
Here is what I currently have set but I only seem to get about 2.2Mh/s per card when i see other people able to get 2.5Mh/s:
"auto-fan" : true, "intensity" : "20", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "0", "shaders" : "0", "api-listen" : true, "api-port" : "4028", "api-allow" : "W:127.0.0.1", "gpu-threads" : "1", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-engine" : "0", "gpu-memclock" : "0", "gpu-powertune" : "20", "gpu-vddc" : "0.00", "gpu-fan" : "40-100", "temp-hysteresis" : "3", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "80", "log" : "5", "no-pool-disable" : true, "queue" : "1", "expiry" : "20", "scan-time" : "60", "shares" : "0", "kernel-path" : "/usr/local/bin", "kernel" : "darkcoin"
Thanks!
Try to increase your "gpu-threads" to 2 or 4. First with a much lower intensity (13), then increase it gradually again while monitoring that you don't get any HW errors. Another thing that did it for me was setting the "gpu-engine" to 947 and "gpu-memclock" to 1250, but this is specific for my card and you might want to have a look at https://litecoin.info/Mining_hardware_comparison to get an idea about tweaks for your card. It's a good idea to SSH (with Putty if you're on Windows) into the rig to adjust the intensity live, as in without rebooting. Send me a Datoshi if I helped XefoKFuuZRCm1TFUJwnjZV2N7TP2rprFJM
|
|
|
|
crazycoin
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 18, 2014, 01:55:35 PM |
|
Hi,
thanks for Pimp. Great work.
Would somebody explain, how to increase default partition? For example, if I write image to 16Gb USB, how can I convert first partition to increase size. For example, in order to install some wallets, or file manager (for example Nautilus)... or some additional miner (e.g. Nan)
|
|
|
|
crazycoin
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 20, 2014, 09:34:01 PM |
|
Please, help me. I used to run Pimp without any problems. Now I am having issues with two rigs, both running Gigabyte 270 cards on Biostar HB61 mobo.
Basically Pimp gets booted in text mode. On exact same computer using exact same USB stick, it no longer boots in graphical mode. The only thin that I have touched was UTP cable that I have change from one switch to the other router. But even if I switch cable back, Pimp stays in the same text mode.
|
|
|
|
savale
|
|
May 20, 2014, 09:41:41 PM |
|
PIMPED my rigs for a while and will donate some more soon.
would love to see some extra mining kernels added in the : blake / x13 (although it's quite easy doing it myself)
|
|
|
|
zyebu
Newbie
Offline
Activity: 36
Merit: 0
|
|
May 21, 2014, 12:09:32 AM |
|
Cant start PIMP. Says failed to start code 4 what to do?
|
|
|
|
|