[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[nicehash]

How do I get KNC Jupiter to mine properly with Nicehash. From time to time I keep getting a slower speed (25% slower) because it keeps reconnecting or submitting 0 shares.

How to enable the extranounce ?

Please take a look here: https://www.nicehash.com/index.jsp?p=software#bfgminer

1. Update your miner to the latest firmware.

2. Set pool like this:
stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
or
stratum+tcp://stratum.westhash.com:3333/#xnsub#skipcbcheck

[Muhammed Zakir]

How do I get KNC Jupiter to mine properly with Nicehash. From time to time I keep getting a slower speed (25% slower) because it keeps reconnecting or submitting 0 shares.

How to enable the extranounce ?

Please take a look here: https://www.nicehash.com/index.jsp?p=software#bfgminer

1. Update your miner to the latest firmware.

2. Set pool like this:
stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
or
stratum+tcp://stratum.westhash.com:3333/#xnsub#skipcbcheck

Thanks, doubt solved! Deleting my post now:

How do I get KNC Jupiter to mine properly with Nicehash. From time to time I keep getting a slower speed (25% slower) because it keeps reconnecting or submitting 0 shares.

How to enable the extranounce ?

Can't it be done using BFG miner? BFG miner supports KNC miners, so it may work - haven't tried it though.

   -MZ

   -MZ

[tic-tac-totoro]

Hi,

Today we introduced an attractive feature for buyers of hashing power - fixed orders.

This type of order will allow you to place an order with fixed price and will guarantee you the the desired hashing speed through order's lifetime, even if there are other bidding orders with higher price submitted later on. You will have to pay a bit higher price in relation to current fixed orders demand. This type of order is especially appropriate for renters of smaller amount of hashing power who are seeking for a way to rent hashing power with a peace of mind with no need to watch over the order in case some other to over bid you. This is essentially the same as renting a physical miner or renting a physical rig, however you still retain all the benefits of renting hashing power by being able to cancel the order any time and pay only for accepted shares without any risk for faulty configured rigs. Needles to say that this type of renting is also prone to bots manipulation since the hashing power is dedicated to your order.

Please take a look at updated FAQ "How can I buy hash power at NiceHash?" for all the details.

So, if you're still in the old-school of directly renting rigs now is the time to upgrade to our Fixed orders - in most cases you will get a price well below directly renting miners or rigs while still preserving all the benefits of renting hashing power with the same careless experience as having your own on-demand miner or rig!

Thank you for using our service.

NiceHash

This new feature doesn't looks good for x13.
Now they can create a bot for the web interface waiting for low price and put a fixed order.
IMHO, fixed orders must be disabled for algo with low hashrate available.

This; what happened to the 50% maximum for fixed orders?

[nicehash]

This new feature doesn't looks good for x13.
Now they can create a bot for the web interface waiting for low price and put a fixed order.
IMHO, fixed orders must be disabled for algo with low hashrate available.

This; what happened to the 50% maximum for fixed orders?

Multi-algo ports are specific. It is possible that someone places an fixed order for 50%, then many miners switches to other algorithm and there is no more hashing power available (and we can't "take away" the already assigned hashing power from fixed orders).

We fixed this so that we implemented lower fixed orders quotas for low hashing power algorithms.

Current quotas are:
 { 0.5, 0.5, 0.1, 0.4, 0.2, 0.1, 0.2, 0.1, 0.2, 0.2 }; (0.5 means 50% and so on)

Where algorithms are
 { sha, scrypt, scrypt-n, x11, x13, keccak, x15, nist5, neoscrypt, lyra2re };

We will monitor the situation and tune our system accordingly.

Thank you for using our service!

[kreativling]

Today my Antminer works as usual (1.24 TH) but I only get around 0.5 TH as accepted shares on Nicehash, and no rejected shares to speak of. I am used to a 10% lower rate on nicehash, but this is too much. Is there an explanation for this? For the time being I stop hashing here.

[nicehash]

Today my Antminer works as usual (1.24 TH) but I only get around 0.5 TH as accepted shares on Nicehash, and no rejected shares to speak of. I am used to a 10% lower rate on nicehash, but this is too much. Is there an explanation for this? For the time being I stop hashing here.

Please send us your bitcoin address, used for mining with this miner on NiceHash and possibly also your public ip address to support@nicehash.com so that we can check what could be the issue for this.

[ascii]

This new feature doesn't looks good for x13.
Now they can create a bot for the web interface waiting for low price and put a fixed order.
IMHO, fixed orders must be disabled for algo with low hashrate available.

This; what happened to the 50% maximum for fixed orders?

Multi-algo ports are specific. It is possible that someone places an fixed order for 50%, then many miners switches to other algorithm and there is no more hashing power available (and we can't "take away" the already assigned hashing power from fixed orders).

We fixed this so that we implemented lower fixed orders quotas for low hashing power algorithms.

Current quotas are:
 { 0.5, 0.5, 0.1, 0.4, 0.2, 0.1, 0.2, 0.1, 0.2, 0.2 }; (0.5 means 50% and so on)

Where algorithms are
 { sha, scrypt, scrypt-n, x11, x13, keccak, x15, nist5, neoscrypt, lyra2re };

We will monitor the situation and tune our system accordingly.

Thank you for using our service!

That's look a lot better. Thanks !

[adaseb]

How do I get KNC Jupiter to mine properly with Nicehash. From time to time I keep getting a slower speed (25% slower) because it keeps reconnecting or submitting 0 shares.

How to enable the extranounce ?

Please take a look here: https://www.nicehash.com/index.jsp?p=software#bfgminer

1. Update your miner to the latest firmware.

2. Set pool like this:
stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
or
stratum+tcp://stratum.westhash.com:3333/#xnsub#skipcbcheck

Doesn't seem to work. In the stats it says Extranonce subscription is not enabled.

I upgraded to BFGMiner 5.0 and tried the

stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
stratum+tcp://stratum.nicehash.com:3333/#xnsub
stratum+tcp://stratum.nicehash.com:3333#xnsub  <--- says its dead this way


Anyone have a Jupiter and sucessfuly running ?

[nicehash]

Doesn't seem to work. In the stats it says Extranonce subscription is not enabled.

I upgraded to BFGMiner 5.0 and tried the

stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
stratum+tcp://stratum.nicehash.com:3333/#xnsub
stratum+tcp://stratum.nicehash.com:3333#xnsub  <--- says its dead this way


Anyone have a Jupiter and sucessfuly running ?

Sorry, we've given you the wrong port, it's 3334 for SHA (3333 is for Scrypt), that would be:

stratum+tcp://stratum.nicehash.com:3334/#xnsub#skipcbcheck
or
stratum+tcp://stratum.westhash.com:3334/#xnsub#skipcbcheck

[adaseb]

Doesn't seem to work. In the stats it says Extranonce subscription is not enabled.

I upgraded to BFGMiner 5.0 and tried the

stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck
stratum+tcp://stratum.nicehash.com:3333/#xnsub
stratum+tcp://stratum.nicehash.com:3333#xnsub  <--- says its dead this way


Anyone have a Jupiter and sucessfuly running ?

Sorry, we've given you the wrong port, it's 3334 for SHA (3333 is for Scrypt), that would be:

stratum+tcp://stratum.nicehash.com:3334/#xnsub#skipcbcheck
or
stratum+tcp://stratum.westhash.com:3334/#xnsub#skipcbcheck

Yes I tried with the 3334 port and its the same. It hashes and everything but the extranonce isn't enabled and after a few hours it really slows down the speeds.

[Muhammed Zakir]

Yes I tried with the 3334 port and its the same. It hashes and everything but the extranonce isn't enabled and after a few hours it really slows down the speeds.

Can you post your BAT/CMD/Config file here? Are you sure you used correct pool url:port? What about your frequency, don't set it high.

   -MZ

[adaseb]

Yes I tried with the 3334 port and its the same. It hashes and everything but the extranonce isn't enabled and after a few hours it really slows down the speeds.

Can you post your BAT/CMD/Config file here? Are you sure you used correct pool url:port? What about your frequency, don't set it high.

   -MZ

yes it connects and mines but the extranonce is not enabled on the stats

[tuaris]

Suddenly I can no longer connect to nicehash or westhash on any port.

[Muhammed Zakir]

yes it connects and mines but the extranonce is not enabled on the stats

Didn't you use #xnsub and #skipcbcheck(optional)? i.e., pool:port/#xnsub or pool:port/#xnsub#skipcbcheck

   -MZ

[dhsc19]

Does anyone have any suggestions on how I can improve this config for 280X GPU.  I am particularly interested in the settings for keccak.  All the other algos seem to hash very well.  My problem with keccak, I'm getting at least 20% reject either job not found or stale shares.

Code:

{
"pools" : [
        {
                "name" : "WestHash-Scrypt",
                "url" : "stratum+tcp://stratum.westhash.com:4333",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "zuikkis",
                "intensity" : "13",
                "gpu-engine" : "1100",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-Scrypt-N",
                "url" : "stratum+tcp://stratum.westhash.com:4335",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "nfactor" : "11",
                "algorithm" : "zuikkis",
                "intensity" : "13",
                "gpu-engine" : "1080",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-X11",
                "url" : "stratum+tcp://stratum.westhash.com:4336",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "worksize" : "64",
                "algorithm" : "darkcoin-mod",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-X13",
                "url" : "stratum+tcp://stratum.westhash.com:4337",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "marucoin-mod",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-Keccak",
                "url" : "stratum+tcp://stratum.westhash.com:4338",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "maxcoin",
                "intensity" : "14",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-X15",
                "url" : "stratum+tcp://stratum.westhash.com:4339",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "bitblock",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-NIST5",
                "url" : "stratum+tcp://stratum.westhash.com:4340",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "talkcoin-mod",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-NeoScrypt",
                "url" : "stratum+tcp://stratum.westhash.com:4341",
                "user" : "BTC_addr",
                "pass" : "x",
                "rawintensity" : "8192",
                "algorithm" : "neoscrypt",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1350",
                "gpu-powertune" : "30",
                "worksize" : "64"
        },
        {
                "name" : "WestHash-Lyra2RE",
                "url" : "stratum+tcp://stratum.westhash.com:4342",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "Lyra2RE",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        },
        {
                "name" : "WestHash-X11-Last-Resort",
                "url" : "stratum+tcp://stratum.westhash.com:3336",
                "user" : "BTC_addr",
                "pass" : "x",
                "thread-concurrency" : "8192",
                "algorithm" : "darkcoin-mod",
                "intensity" : "18",
                "gpu-engine" : "1150",
                "gpu-memclock" : "1500"
        }
]
,
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-fan" : "30-85",
"gpu-memdiff" : "0",
"gpu-powertune" : "-20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "90",
"temp-overheat" : "85",
"temp-target" : "72",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"api-allow" : "W:127.0.0.1",
"auto-fan" : true,
"auto-gpu" : false,
"expiry" : "1",
"failover-switch-delay" : "30",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : false,
"queue" : "1",
"scan-time" : "1",
"temp-hysteresis" : "3",
"shares" : "0",
"failover-only" : true,
"kernel-path" : "/home/user/Downloads/mining/sgminer/kernel"
}

Maybe this helps, here is one of my neoscrypt settings for 280x (should work with most models), I use following settings:

Code:

                "algorithm" : "neoscrypt",
                "gpu-engine" : "1030",
                "gpu-memclock" : "1500",
                "gpu-powertune" : "20",
                "shaders" : "2048",
                "worksize" : "64",
                "thread-concurrency" : "16385",
                "intensity" : "13"

Depending on card I get 130-170 with 14.12. I am keeping GPU at 70°, increasing fan speed to 70% would give me <65°.

Thank you for the reply, boki15.  I currently get around 304 kh/s @ 71-72° with my neoscrypt settings.  I'm using the linux driver compiled by this file "amd-driver-installer-14.20-x86.x86_64.run". 

[crusoe1234]

Why does it take up to 24hrs to withdraw funds from my wallet?

[Muhammed Zakir]

Why does it take up to 24hrs to withdraw funds from my wallet?

It is in't every 24 hours, it is made 4 times a day(in other words, maybe every 6 hours).

Sellers are paid on PPS system. Payments (payouts) are issued four times a day if your unpaid balance is greater than 0.04 BTC. Every fourth payment (once per day) is issued if balance is greater than 0.004 BTC. We will do payments for balances greater than 0.0001 BTC once every week. All balances from all algorithms are aggregated into a single payment.

   -MZ

[zonalimitatore]

I have the same problem. i can't have acces extranonce with my gridseed.
I use minerd,and ccminer 1.5.39 per my gpu.
With gpu no problem,i have extranonce access

[Muhammed Zakir]

I have the same problem. i can't have acces extranonce with my gridseed.
I use minerd,and ccminer 1.5.39 per my gpu.
With gpu no problem,i have extranonce access

Use BFGMiner for gridseed and use #xnsub after pool:port, example : stratum+tcp://stratum.nicehash.com:3333/#xnsub#skipcbcheck

   -MZ

[zonalimitatore]

have the overclock options?