[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[Trevor3000]

My X11, X13 and X15 are all working currently.

[Chuvanan.org]

I used nicehash, have wallet on nicehash
Now, I login nicehash but don't show my wallet.
Please help payout my BTC???

They changed wallets. Push button to create new. Coins are automatically transfered.

BUT i dont see new payouts in my new wallet. Developer, pls help me with it. Wallet is: 1JkUVrGJmQtkDnysRoTk197dbP8D3JbyA3

Thank you !  

[tylerderden]

All the other bullshit aside, You guys cost me a shitload of trustplus with your fucked up site but you sure as hell didn't mess up charging me. Allow me to elaborate, I paid .03 btc for .5ghs worth of mining and left for work what i got was 6000 khs (on ipominer which i have used several times a week since this site launched) normally i get around 477,000 to 500,000. so i was completely scammed out of my hashrate and mt btc. Now me being one to not accuse without proof went ahead and tried again to see if it was a fluke or stratum problem or whatever, same deal you fuckers charged me all my btc and gave me back minimal hashrate, now i'm sure you going to try and say it's the pool or some other garbage and i can assure you it isn't. I have dealt with Wuher who runs ipominer for a long time and he has always been fair and honest. So i'm fucking pissed, i used your site exclusively for rentals at a minimum of .5 btc per week for months and I will not be using it again. And if you think i'm the only one your fooling yourselves, a competitor is already in the works and once people discover how much you u have been fucking us your days are numbered. Total goddamn bullshit.

[tylerderden]

and for the record i also tried suchpool and dedicated both on different coins with the same result, nicehash devouring my btc and giving me less hashrate than i could generate with my own rigs. it seems greed has taken hold of this once decent at best site.

[JimmyRigs]

Connecting fine now that profits have dropped back down. 

[yudhistira]

We hope get normal soon

[chinh.daongoc]

All miners that had issues with connecting. Can you confirm it is working now?

It has been being fine and stable for more than 10 hours! Thanks for your support!

[wwzoon]

i just try x13 and don't work the pool
edit: right now work, but not so well

[chinh.daongoc]

@nicehashdev: I think that the profit counting system has a problem. For example at this moment:

X11   19.3508 GH/s   0.6101 BTC/GH/Day
X13   6.2532 GH/s   0.6997 BTC/GH/Day
X15    4.4849 GH/s   0.7123 BTC/GH/Day

X11 is the best profit coin, but nicehash points to X15.

Other example: sometimes when X13 has higher paying rate than X15 but the system also choices X15 as the most profit coin.

So I think X15 profit counting formula is not right. Please check.

[chinh.daongoc]

At this moment a 280x card can perform:

3.75 MH/s for X11
2.82 MH/s for X13
2.51 MH/s for X15

So the fair reward rate should be 1 BTC/GH/day (X11) = 1.33 BTC/GH/day (X13) = 1.5 BTC/GH/day (X15)

[cryptosminer]

Hi,

here is small tool to monitor NiceHash global and user stats.

Change address to your NiceHash BTC wallet address and all hashrates are in kH/s.

Code:

{
	"address":"1Go5KGh82qTifhNYtguVsoH3buDegyVTRB",
	"algos":[
		{ "algo":0, "hashrate":2200},
		{ "algo":1, "hashrate":0},
		{ "algo":2, "hashrate":1100},
		{ "algo":3, "hashrate":9500},
		{ "algo":4, "hashrate":7300},
		{ "algo":5, "hashrate":1000000}
	]
}

Download https://mega.co.nz/#!ZMU1UQqA!6HJlq-Zh7ooBtz4XzOW10KhYTWKocw8w--APRRO5VNQ



If you found this useful, please donate some bitcoins to 1CUyh5BXsTor1RRz6XTttKM4pqFmZ118r3

Added X15 and Nist5 + some minor tweeks.

https://mega.co.nz/#!cQdGBIgZ!_VFDLuAw8Ai5asJKfs7CjZcSHuE5xOlNJtmvt4a0hmU

Updated

https://mega.co.nz/#!wUlTHRjR!Ip08Y4ijeTspEWNO57UmA30fm0n1s2NlWu-7Vbdix4g

[kenshirothefist]

@nicehashdev: I think that the profit counting system has a problem. For example at this moment:

X11   19.3508 GH/s   0.6101 BTC/GH/Day
X13   6.2532 GH/s   0.6997 BTC/GH/Day
X15    4.4849 GH/s   0.7123 BTC/GH/Day

X11 is the best profit coin, but nicehash points to X15.

Other example: sometimes when X13 has higher paying rate than X15 but the system also choices X15 as the most profit coin.

So I think X15 profit counting formula is not right. Please check.

We are using our defaults to calculate factors between different algorithms that hopefully suits the vast majority, you can see them in the table here: https://www.nicehash.com/multialgo/. However, if your per-algo performances are different, you can set your own factors: https://www.nicehash.com/multialgo/#finetuning. Of course, this means that the currently best-paying algo as displayed on the front page might not be the same as the one that fits your custom config.

Hashing speed hightly depends on AMD drivers version (13.x vs 14.6), sgminer version and windows/linux. Maybe it is time to re-adjust our default factors, so please post your hashing speed here, if we'll get enough responses we'll adjusts the defaults.

For example:

0.85 MH/s for Scrypt
3.75 MH/s for X11
2.80 MH/s for X13
2.50 MH/s for X15

[NikitaS]

@nicehashdev: I think that the profit counting system has a problem. For example at this moment:

X11   19.3508 GH/s   0.6101 BTC/GH/Day
X13   6.2532 GH/s   0.6997 BTC/GH/Day
X15    4.4849 GH/s   0.7123 BTC/GH/Day

X11 is the best profit coin, but nicehash points to X15.

Other example: sometimes when X13 has higher paying rate than X15 but the system also choices X15 as the most profit coin.

So I think X15 profit counting formula is not right. Please check.

We are using our defaults to calculate factors between different algorithms that hopefully suits the vast majority, you can see them in the table here: https://www.nicehash.com/multialgo/. However, if your per-algo performances are different, you can set your own factors: https://www.nicehash.com/multialgo/#finetuning. Of course, this means that the currently best-paying algo as displayed on the front page might not be the same as the one that fits your custom config.

Hashing speed hightly depends on AMD drivers version (13.x vs 14.6), sgminer version and windows/linux. Maybe it is time to re-adjust our default factors, so please post your hashing speed here, if we'll get enough responses we'll adjusts the defaults.

For example:

0.85 MH/s for Scrypt
3.75 MH/s for X11
2.80 MH/s for X13
2.50 MH/s for X15

There is diference with amd drivers. Open-cl libs in fact. Getting 14.6 betta opencl i get on x13 on radeon 280x higher hashrate from 2500 to 3100. This all by windows. On Linux hash rate is lower, because updating drivers on SMOS is dificult .

[alienesb]

Hey I really like the new Worker details you added 

[nicehashdev]

Hey I really like the new Worker details you added 

You can name them. Just append dot (.) and 7 alphanumeric characters to the BTC address.

[alienesb]

Hey I really like the new Worker details you added 

You can name them. Just append dot (.) and 7 alphanumeric characters to the BTC address.

Yep, it works great thanks.

[ndevices]

nicehashdev
why port stays 4336 open, when 4339 more profitable?
my miner automatically switched to x11 from x15.

[nicehashdev]

nicehashdev
why port stays 4336 open, when 4339 more profitable?
my miner automatically switched to x11 from x15.

All 4xxx ports are always open. Your authorization will be refused if another algorithm is better, according to factors and costs (your provided or default ones).

[ndevices]

nicehashdev
f=5.6 on x11   port open  price=0.7
f=3.4 on x15   port open   price=1.9
f=4 on x13  port dead

[StuffOfInterest]

Hey I really like the new Worker details you added  

You can name them. Just append dot (.) and 7 alphanumeric characters to the BTC address.

Oh, finally!  Thanks, that is what I've been needing.

Now, how about a summary page which shows the information for all algorithms?  No charts, just the current mining numbers and totals (perhaps with subsections for workers).  My miner control switches constantly (worked on four different algorithms in the last day) so having a summary page would save bouncing around as much.  I can see the summaries, and total, in my NiceHash Control program but that doesn't do any good when I'm away from the machine.

Thanks.