[ANN][BMR] Bitmonero - a new coin based on CryptoNote technology - LAUNCHED

[knightcoin]

This doesn't make sense.

There's a Bitmonero, and a Monero both made by different devs?

Can someone please clarify?

Same fork, same dev as the original author.  The community changed the name, but the original author didn't close the thread.

so I guess the problem is the lib dependence ...

[1714163526]

1714163526

[1714163526]

1714163526

[1714163526]

1714163526

[xeroc]

I was trying to compile it on ubuntu 13.10 but something went wrong ...  first I got a problem with libboost-atomic v1.53.0 .. the I got stuck here ...

Code:

ubuntu@ubuntu:~/bitmonero$ sudo make
mkdir -p build/release
cd build/release && cmake -D CMAKE_BUILD_TYPE=Release ../..
-- Boost version: 1.53.0
-- Found the following Boost libraries:
--   system
--   filesystem
--   thread
--   date_time
--   chrono
--   regex
--   serialization
--   atomic
--   program_options
-- Found Git: /usr/bin/git
-- Could NOT find Threads (missing:  Threads_FOUND) 
-- Configuring done
-- Generating done
-- Build files have been written to: /home/ubuntu/bitmonero/build/release
cd build/release && make
make[1]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[2]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
fatal: No names found, cannot describe anything.
CMake Warning at src/version.cmake:3 (message):
  Cannot determine current revision.  Make sure that you are building either
  from a Git working tree or from a source archive.


make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
[  0%] Built target version
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
[ 13%] Built target upnpc-static
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
[ 16%] Built target common
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
[ 26%] Built target cryptonote_core
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
[ 45%] Built target crypto
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
make[3]: Entering directory `/home/ubuntu/bitmonero/build/release'
make[3]: *** No rule to make target `/usr/lib/x86_64-linux-gnu/libboost_atomic.so', needed by `src/connectivity_tool'.  Stop.
make[3]: Leaving directory `/home/ubuntu/bitmonero/build/release'
make[2]: *** [src/CMakeFiles/connectivity_tool.dir/all] Error 2
make[2]: Leaving directory `/home/ubuntu/bitmonero/build/release'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/ubuntu/bitmonero/build/release'
make: *** [build-release] Error 2
ubuntu@ubuntu:~/bitmonero$ 

Are you using 32 bit Ubuntu ?

noop .. amd64

Here it helped deleting the build folder and starting all over .. I updated boost and then got exactly this error msg.

[knightcoin]

I still have trouble to compile it on Linux ... now it's goes a little further .. but complete frozen the machine, I have to reset it manually on power bottom ... today I will try to install libboost 1.55 instead 1.53 as soon as I get a spare time on my job ...  

[melosine]

I tried compiling on Debian, got the libboost error. I can't seem to update to libboost1.55 on testing yet. Don't want to break my system, so I gave up.

[tacotime]

fresh install of 13.10 works fine, i recommend you just shrink your volume a bit and install it alongside your current linux part.

[stellarman]

So, I downloaded and ran the daemon, downloaded the blockchain, figured out the firewall issues, got the daemon to start mining, and actually showed a hash rate. I'm on a 2.8GH AMD Sempron 64-bit Windows 8 machine with 8GB of memory. Decent, but not a super machine. CPU usage is > 95%.

The problem is that the highest hash rate I have seen so far was 0.1 H/sec. Most of the time it is zero.

What's with that??

At this point, I can't justify running the processor at 100% when it is producing no significant hashes.

Anyone have any suggestions?

Rick

[knightcoin]

my linux compiling problem - SOLVED ...

[smooth]

So, I downloaded and ran the daemon, downloaded the blockchain, figured out the firewall issues, got the daemon to start mining, and actually showed a hash rate. I'm on a 2.8GH AMD Sempron 64-bit Windows 8 machine with 8GB of memory. Decent, but not a super machine. CPU usage is > 95%.

The problem is that the highest hash rate I have seen so far was 0.1 H/sec. Most of the time it is zero.

What's with that??

At this point, I can't justify running the processor at 100% when it is producing no significant hashes.

Anyone have any suggestions?

Rick

Linux or Windows? If Windows, boot to Linux and compile it yourself. The Windows binaries may be poorly optimized for AMD.

Also, I'm not really familiar with the Sempron but if it has small cache and slow access to RAM it may never mine this coin very well. The proof of work for this coin is designed to be memory hard.

I'd try Linux before giving up though.

[knightcoin]

So, I downloaded and ran the daemon, downloaded the blockchain, figured out the firewall issues, got the daemon to start mining, and actually showed a hash rate. I'm on a 2.8GH AMD Sempron 64-bit Windows 8 machine with 8GB of memory. Decent, but not a super machine. CPU usage is > 95%.

The problem is that the highest hash rate I have seen so far was 0.1 H/sec. Most of the time it is zero.

What's with that??

At this point, I can't justify running the processor at 100% when it is producing no significant hashes.

Anyone have any suggestions?

Rick

Linux or Windows? If Windows, boot to Linux and compile it yourself. The Windows binaries may be poorly optimized for AMD.

Also, I'm not really familiar with the Sempron but if it has small cache and slow access to RAM it may never mine this coin very well. The proof of work for this coin is designed to be memory hard.

I'd try Linux before giving up though.

it's awkward ... on the exacly same machine I get 13.9 hashrate on bytecoin daemon ... but monero daemon all I got this below .. any clues ?

[smooth]

it's awkward ... on the exacly same machine I get 13.9 hashrate on bytecoin daemon ... but monero daemon all I got this below .. any clues ?

That is odd, the mining code is exactly the same. Have you tried restarting? Deleting and redownloading the block chain (the Monero block chain is pretty small, so this is easy)?

Sounds like something is messsed up.

When you do print_cn in the daemon do you see active connections? BCN and MRO use different ports to connect, maybe one is being blocked by a firewall. That's the only difference I can think of.

[knightcoin]

it's awkward ... on the exacly same machine I get 13.9 hashrate on bytecoin daemon ... but monero daemon all I got this below .. any clues ?

That is odd, the mining code is exactly the same. Have you tried restarting? Deleting and redownloading the block chain (the Monero block chain is pretty small, so this is easy)?

Sounds like something is messsed up.

When you do print_cn in the daemon do you see active connections? BCN and MRO use different ports to connect, maybe one is being blocked by a firewall. That's the only difference I can think of.

now is fine ... thanks

[mrpopgun]

Has anyone benched a Haswell i3 vs a Haswell i7?

[gaba]

21 days behind after 1 hour of synchronization. It's that OK?

[stellarman]

now is fine ... thanks

http://i58.tinypic.com/15hg1uu.png

What did you do to get it working better?

[knightcoin]

now is fine ... thanks

What did you do to get it working better?

Microsoft Solution, restart, joking but I was about to do that ... then what I actually did was change the process priority before.. just to see what happens... and did works .. lucky me ...

Code:

renice {priority} pid

[knightcoin]

But I think it's very hard to solo mining rigth now .. I got 2 machines running @ 29 hashrate 24 hours and noting ... not even a single block .. so I going to stop and wait for a pool server ... I'll back to primecoin mining ... 

[smooth]

But I think it's very hard to solo mining rigth now .. I got 2 machines running @ 29 hashrate 24 hours and noting ... not even a single block .. so I going to stop and wait for a pool server ... I'll back to primecoin mining ... 

Total hash rate is about 10000. With 29 you should get 0.29% of the blocks. There are 1440 blocks per day so you should be getting 4 blocks per day at that rate. You might want to keep going.

[Patejl]

Something is wrong. I can't get into my windows wallet anymore.

Error: refresh error: transaction extra parse error.

[GreekBitcoin]

Something is wrong. I can't get into my windows wallet anymore.

Error: refresh error: transaction extra parse error.

I got the same error in Linux a few minutes ago... I have a feeling that this is not good

[dnaleor]

What is the issue? I can not connect at the momen (I am on a public network witrh restrictions...)