TECHNOBIT support tread + customer feedback

Quote from: technobitVesi on October 12, 2014, 05:43:16 PM

Hi,
just remove the whole set and mount it on your new board.

Regards : Vesi

Hi Vesi,
ok, thx. i'll work it out. Have already placed many coolers on cpu's was just wondering if there where any special things to think about in case of an hex4m

When i look at tracking & tracing of dpd, it will arrive tommorow

edit: 14-10-2014, it has arrived. today i'll swap the coolers.

Lot of errors, what could be the source of this? Vesi, are you Guys able to look into it with teamviewer? I cant find anything wrong.

[Firmware Version] => 20140817
cgminer: 4_5_0_52103f6
Reply was 'STATUS=S,When=1413363694,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=HEX80,Enabled=Y,Status=Alive,Elapsed=70,MHS 5s=215.9G,MHS av=229.5G,Hardware Errors=8,Hardware Errors%=0.2130,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=0,Last Share Time=1413363687,Chip Count=8,Frequency=230,Core Voltage=860,PIC Voltage Readings=859,Chip1 Nonces=84,Chip1 Engines=32,Chip1 Dupes=0,Chip2 Nonces=76,Chip2 Engines=32,Chip2 Dupes=0,Chip3 Nonces=88,Chip3 Engines=32,Chip3 Dupes=0,Chip4 Nonces=80,Chip4 Engines=32,Chip4 Dupes=0,Chip5 Nonces=92,Chip5 Engines=32,Chip5 Dupes=0,Chip6 Nonces=96,Chip6 Engines=32,Chip6 Dupes=0,Chip7 Nonces=89,Chip7 Engines=32,Chip7 Dupes=0,Chip8 Nonces=83,Chip8 Engines=32,Chip8 Dupes=0|STATS=1,ID=HEXM0,Enabled=Y,Status=Alive,Elapsed=70,MHS 5s=88.10G,MHS av=57.68G,Hardware Errors=22,Hardware Errors%=2.2680,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=79,Last Share Time=1413363683,Chip Count=4,Frequency=1024,Core Voltage=820,PIC Voltage Readings=817,Chip0 Nonces=198,Chip0 Dupes=5,Chip0 Timouts Reset=14,Chip0 HW Errors Reset=0,Chip1 Nonces=552,Chip1 Dupes=81,Chip1 Timouts Reset=18,Chip1 HW Errors Reset=0,Chip2 Nonces=36,Chip2 Dupes=45,Chip2 Timouts Reset=29,Chip2 HW Errors Reset=0,Chip3 Nonces=162,Chip3 Dupes=63,Chip3 Timouts Reset=18,Chip3 HW Errors Reset=0|STATS=2,ID=POOL0,Elapsed=70,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=256.00000000,Min Diff=256.00000000,Max Diff=256.00000000,Min Diff Count=306,Max Diff Count=306,Times Sent=28,Bytes Sent=2915,Times Recv=39,Bytes Recv=8589,Net Bytes Sent=2915,Net Bytes Recv=8589|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1413363694

Code:

 => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.5.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => HEX80
   [Enabled] => Y
   [Status] => Alive
   [Elapsed] => 70
   [MHS 5s] => 215.9G
   [MHS av] => 229.5G
   [Hardware Errors] => 8
   [Hardware Errors%] => 0.2130
   [USB Read Errors] => 0
   [USB Write Errors] => 0
   [USB Reset Count] => 0
   [Miner Reset Count] => 0
   [Last Share Time] => 1413363687
   [Chip Count] => 8
   [Frequency] => 230
   [Core Voltage] => 860
   [PIC Voltage Readings] => 859
   [Chip1 Nonces] => 84
   [Chip1 Engines] => 32
   [Chip1 Dupes] => 0
   [Chip2 Nonces] => 76
   [Chip2 Engines] => 32
   [Chip2 Dupes] => 0
   [Chip3 Nonces] => 88
   [Chip3 Engines] => 32
   [Chip3 Dupes] => 0
   [Chip4 Nonces] => 80
   [Chip4 Engines] => 32
   [Chip4 Dupes] => 0
   [Chip5 Nonces] => 92
   [Chip5 Engines] => 32
   [Chip5 Dupes] => 0
   [Chip6 Nonces] => 96
   [Chip6 Engines] => 32
   [Chip6 Dupes] => 0
   [Chip7 Nonces] => 89
   [Chip7 Engines] => 32
   [Chip7 Dupes] => 0
   [Chip8 Nonces] => 83
   [Chip8 Engines] => 32
   [Chip8 Dupes] => 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => HEXM0
   [Enabled] => Y
   [Status] => Alive
   [Elapsed] => 70
   [MHS 5s] => 88.10G
   [MHS av] => 57.68G
   [Hardware Errors] => 22
   [Hardware Errors%] => 2.2680
   [USB Read Errors] => 0
   [USB Write Errors] => 0
   [USB Reset Count] => 0
   [Miner Reset Count] => 79
   [Last Share Time] => 1413363683
   [Chip Count] => 4
   [Frequency] => 1024
   [Core Voltage] => 820
   [PIC Voltage Readings] => 817
   [Chip0 Nonces] => 198
   [Chip0 Dupes] => 5
   [Chip0 Timouts Reset] => 14
   [Chip0 HW Errors Reset] => 0
   [Chip1 Nonces] => 552
   [Chip1 Dupes] => 81
   [Chip1 Timouts Reset] => 18
   [Chip1 HW Errors Reset] => 0
   [Chip2 Nonces] => 36
   [Chip2 Dupes] => 45
   [Chip2 Timouts Reset] => 29
   [Chip2 HW Errors Reset] => 0
   [Chip3 Nonces] => 162
   [Chip3 Dupes] => 63
   [Chip3 Timouts Reset] => 18
   [Chip3 HW Errors Reset] => 0
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL0
   [Elapsed] => 70
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 256.00000000
   [Min Diff] => 256.00000000
   [Max Diff] => 256.00000000
   [Min Diff Count] => 306
   [Max Diff Count] => 306
   [Times Sent] => 28
   [Bytes Sent] => 2915
   [Times Recv] => 39
   [Bytes Recv] => 8589
   [Net Bytes Sent] => 2915
   [Net Bytes Recv] => 8589
)

	Author	Topic: TECHNOBIT support tread + customer feedback (Read 62549 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.