I will take a look to see what I can find out. My thought is the power supply might be the problem. Even though it has 104A on a single rail....that might be the issue in and of itself. I ran into a problem with my Lepa 1600W and had to replace it recently. I had to relegate to PC. I ordered a pair of these instead.
http://www.newegg.com/Product/Product.aspx?Item=17-182-251I was seeing power sags with my lepas that I could not explain as I knew the electrical was fine. Figured I had some extra on my budget so I shelled out for the ones above. I will post back more though once i have them. THe performance on the lepas was good BUT not as consistent. I was sure it was not the hardware in this case. FYI that rosewill was one of 3 models AMT actually recommended. They obviously had their systems working with those so I am going on that recommendation. Also the amps on those are more in line with our needs for these miners. I will know more once i have them. But chances are its the PSU in this case. Like I said. It kinda sucks because its a bit of trial and error. BUT it will help others out at least.
Obviously amt systems are not working dude!
Will you be so kind to share how your systems are working?
Pool graph preferably.
Thank you very much in advance
Again Loshia contribute something instead of useless comments since that is the only thing you have done throughout the entire AMT thing. You have not contributed anything but I told you so type comments...of course its obvious the systems aren't working properly. BUT looking carefully through the various comments, in not one situation is anyone running things as AMT recommends and they did make recommendations. The PSU is not one of the 3 they recommend which I imagine they tested with....OR the power requirements are met. The PSU situation is the case with me. The cards show up just fine. BUT the lepas on a per rail basis do not feed enough amperage to the cards. Those cards require alot more it appears. In my case all but a couple of chips are showing up. BUT not hashing. This is due to power. That much is obvious just on reading up on it. Once I get the new PSUs I will know for sure. The ones I got are the rosewills recommended by AMT. So if they still don't work properly after that (with the power sags not occurring on my electrical just on the system) I will be contacting AMT to address this. As its consistent on both systems its likley not both of them. The machines do hash for a while before they start experiencing this problem. But they dont sustain it. This is usually a power issue in my experience with other power hungry electronics.
Again opieum2 ,
I asked simple question and i got very long explanation that AMT stuff works as always but not your blades....I am not laughing at you
I can tell you that it is not PSU 100%
However fill free to spend 300+ USD for the second time i do not mind....
But then i will laugh loudly because my statement that Zipkin poserkoto is giving the crap in person will come true
Ok again...you said alot but nothing useful....WHY is it not the PSU then? Explain with a technical reason besides saying their hardware is crap. You have given no technical reason for it. Just that its crap. And suppose I do get the PSU and it works? then what? What have you said or done to prove me wrong here? That is the point I am making. Yes I spend my money. But at the same time its also a tax write off OR I can return it either way I get my money back for the PSUs. US Govt will give it back to me as its a legitimate business expense in taxes. So I am not concerned. I don't have the "high degree" but I do have information and look at the available data to base my conclusions on. Not a long explanation.
I dont mind being wrong. its how I learn. But show me WHY I am wrong and WHERE with an explanation that goes beyond its crap. I am willing to accept the hardware is broken. BUT I have not gotten to that point. It powers up and is picked up by the operating system. Which means something is working correctly. Its just the hashing that's not happening (consistently) which could be due to a power problem as I have already suspected. Again SHOW ME HOW I AM WRONG. Because you have not been able to do that from a technical standpoint. Explain why the PSU I have (LEPA 1600W) should work but doesnt. Go into as much detail as possible. Otherwise you just are proving my point about how you contribute nothing to this discussion. I am at least helping out the other people on here who got miners as much as I can. I dont have to. I could be just like you and lol at their even worse situation. I was fortunate to get two intact systems so I am willing to share that knowledge to help them out.
You have not done that. All you do is come on here and ask for stats and when it doesnt meet your standards you basically lol at them and say return or sue. How the fuck does that help them? It doesnt. Is AMT responsible for helping them out? YES! Are they doing that now? NO! But figure the community can step up. Or at least I will because I care about my fellow human beings I dont leave them to "die" and then kick them while they are down by laughing at them as you have essentially been doing.
I can tell you that it is not PSU 100%
Then fucking tell us or shut the fuck up. You have been saying that and said that before. I am calling you out here. Explain in detail. Because you talk alot of shit but have not backed up a single word of it with something concrete. Just more shit. IF you can do that then you have at least proven you can be useful. Otherwise you have proven my point and fit the perfect definition of a troll and flamebait.