Bassica
|
|
December 23, 2015, 08:43:20 PM |
|
who is a miner with more than 10khs?
network hashrate is over 10mhs, so we should sure find some people..
how much do you guys estimate comes from botnets? it has to be somewhere between 70-90% if you ask me.
I'm currently bringing 11-14 kh/s to the table. Trying to ramp that up soon though.
|
|
|
|
c789
|
|
December 23, 2015, 09:14:21 PM |
|
I'm cranking out 130 h/s...so look out world.
|
|
|
|
AKWAnalytics
Newbie
Offline
Activity: 52
Merit: 0
|
|
December 24, 2015, 08:00:33 PM |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
|
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
December 24, 2015, 08:02:22 PM Last edit: December 24, 2015, 08:13:44 PM by dEBRUYNE |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
Perhaps a stupid question, but have you actually refreshed both of your wallets? If not, just type refresh in simplewallet (make sure bitmonerod is fully synced). Also, what happened to your other account? EDIT: Do you have the viewkey of your receiving wallet/address and the transaction hash? In that case you can use this particular website to check if your receiving wallet/address actually received the coins. http://xmr.llcoins.net/viewkey.html
|
|
|
|
saddambitcoin
Legendary
Offline
Activity: 1610
Merit: 1004
|
|
December 24, 2015, 08:13:40 PM |
|
If refresh doesn't work, next thing I would try is resyncing the wallet from scratch.
Move the wallet's .bin file to another directory - leave the .bin.keys file in the same place - then start up simplewallet and open your wallet as you normally would. It will start syncing from 0.
|
|
|
|
AKWAnalytics
Newbie
Offline
Activity: 52
Merit: 0
|
|
December 24, 2015, 08:15:03 PM |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
Perhaps a stupid question, but have you actually refreshed both of your wallets? If not, just type refresh in simplewallet (make sure bitmonerod is fully synced). Also, what happened to your other account? Not Stupid! The answer is yes, I was refreshing about every 2 minutes while synced with bitmonerod. From right when the coins where sent until right now some of the coins in wallet 1 are still locked from this tx, and in wallet 2 there is nothing. No coins have been received. BTW, I have sent between these two wallets multiple time, even recently, with no issues. I am positive the address was correct. Any ideas?! I'm kind freaking out... Cheers!
|
|
|
|
saddambitcoin
Legendary
Offline
Activity: 1610
Merit: 1004
|
|
December 24, 2015, 08:25:25 PM |
|
also, type bc_height in simplewallet and see what the current height is. it sounds like your wallet is stuck somehow.
the current block height is 882798.
|
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
December 24, 2015, 08:25:50 PM |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
Perhaps a stupid question, but have you actually refreshed both of your wallets? If not, just type refresh in simplewallet (make sure bitmonerod is fully synced). Also, what happened to your other account? Not Stupid! The answer is yes, I was refreshing about every 2 minutes while synced with bitmonerod. From right when the coins where sent until right now some of the coins in wallet 1 are still locked from this tx, and in wallet 2 there is nothing. No coins have been received. BTW, I have sent between these two wallets multiple time, even recently, with no issues. I am positive the address was correct. Any ideas?! I'm kind freaking out... Cheers! Actually not sure what happened then. I hope someone else can chime in and provide you with an answer. Perhaps try what saddambitcoin suggested? EDIT: You can check the blockheight on https://moneroblocks.eu
|
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
December 24, 2015, 08:26:34 PM |
|
Another update from ShenNoether (NobleSir) regarding Confidential Transactions (CT) for Monero: edit 12/15/2015: I'm starting to play around with some c/c++ stuff that will help me implement this thing for real - I'll probably take a couple weeks off for xmas holidays though starting next week, so expect no updates dec 17-jan 4 All updates & links are in this thread: https://www.reddit.com/r/Monero/comments/3pw30d/ringct_for_monero_updated_versions/Another one: edit 12/17/2015: I have updated the draft on eprint.iacr.org in response to some knock-off versions of this math showing up without citation. Link: http://eprint.iacr.org/2015/1098
|
|
|
|
AKWAnalytics
Newbie
Offline
Activity: 52
Merit: 0
|
|
December 24, 2015, 08:27:16 PM |
|
If refresh doesn't work, next thing I would try is resyncing the wallet from scratch.
Move the wallet's .bin file to another directory - leave the .bin.keys file in the same place - then start up simplewallet and open your wallet as you normally would. It will start syncing from 0.
Thanks! I'll try this one both of them and see what happens... AKW
|
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
December 24, 2015, 08:38:59 PM |
|
Git updates since last time:
Since last post: - more wallet refresh speedups - a few more berkeley db key fixes - fixups for databases created with an early version of the db branch - compatibility with older libdb - new --offline daemon argument - fixes to potential crashers in DB code - optional use of TCP for DNS requests (plays nice with Tor) - atomic wallet cache save (to avoid some types of corruption) - misc tweaks to the README (using Tor, rlwrap) - cleanup in daemon headers, to speed up builds - a couple daemon exit hang fixes, and crash on ^C Quoting because Bitcointalk is borked it seems.
|
|
|
|
MoneroMooo
Legendary
Offline
Activity: 1276
Merit: 1001
|
|
December 24, 2015, 08:39:06 PM |
|
It may well be that your wallet's idea of what outputs are spent got out of sync with the blockchain. I believe there is a bug there. One thing you can try that's pretty fast (assuming you're running your own daemon): - run simplewallet with --trusted-daemon - in simplewallet, run: rescan_spent
You can also run this in the daemon: print_pool_sh
If you see your tx, it means it's not being mined. In this case, the likely reason is that it's a double spend caused by the sync problem above.
|
|
|
|
AKWAnalytics
Newbie
Offline
Activity: 52
Merit: 0
|
|
December 24, 2015, 08:44:53 PM |
|
It may well be that your wallet's idea of what outputs are spent got out of sync with the blockchain. I believe there is a bug there. One thing you can try that's pretty fast (assuming you're running your own daemon): - run simplewallet with --trusted-daemon - in simplewallet, run: rescan_spent
You can also run this in the daemon: print_pool_sh
If you see your tx, it means it's not being mined. In this case, the likely reason is that it's a double spend caused by the sync problem above.
Thank you for your help! I am actually going to try this first, then I'll resync if need be. You guys rock \oo/
|
|
|
|
nioc
Legendary
Offline
Activity: 1624
Merit: 1008
|
|
December 24, 2015, 10:24:15 PM |
|
Broken record here. Another day another 3 PRs merged. Yeah yeah, I know that's not what you're looking for.
|
|
|
|
medusa13
Sr. Member
Offline
Activity: 453
Merit: 500
hello world
|
|
December 25, 2015, 12:47:34 AM |
|
unfortunately i can not test your software wolf0, i do not have an amd card. but please help this guy, looks to me he is wating for feedback. hope some guys with an amd have time to test it out.
anyway thats not what i wanted to say.
..realizing its also too early for an end of year speech i will just say merry xmas mustangs, hope you all have some time to cool off and chill with your family and friends.
|
XMR Monero
|
|
|
medusa13
Sr. Member
Offline
Activity: 453
Merit: 500
hello world
|
|
December 25, 2015, 12:50:25 AM |
|
Broken record here. Another day another 3 PRs merged. Yeah yeah, I know that's not what you're looking for. it is, i want more unit tests
|
XMR Monero
|
|
|
Lloydimiller4
Full Member
Offline
Activity: 186
Merit: 100
Monero
|
|
December 25, 2015, 09:04:47 AM |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
Perhaps a stupid question, but have you actually refreshed both of your wallets? If not, just type refresh in simplewallet (make sure bitmonerod is fully synced). Also, what happened to your other account? Not Stupid! The answer is yes, I was refreshing about every 2 minutes while synced with bitmonerod. From right when the coins where sent until right now some of the coins in wallet 1 are still locked from this tx, and in wallet 2 there is nothing. No coins have been received. BTW, I have sent between these two wallets multiple time, even recently, with no issues. I am positive the address was correct. Any ideas?! I'm kind freaking out... Cheers! I have had this happen to me before. I was using a usb-ethernet dongle and I was refreshed/current with the network, but right before I sent the coins the dongle lost power or something and the transaction never actually went through, though it said it did on my simplewallet. I only figured out what happened about a month later when it happened again and I watched the lights of the dongle go out and put 2 and 2 together. Turns out the funds never left the wallet to begin with, it just looked like it did. Check to see if you have the same amount of monero as before you sent the transaction, maybe check your log or something, but i feel like this is the same thing that happened to me, hope so at least.
|
XMR: 43uAvbYL7z9NrKQig2DswM69XaeDug1Rf8v4Un1ndssb2To51Vojz2uZ21jFumWsCcgvqZ9hPuE3fEr xKoGCkHU8CzqHFiS
|
|
|
dEBRUYNE
Legendary
Offline
Activity: 2268
Merit: 1141
|
|
December 25, 2015, 11:29:53 AM |
|
Hello All,
I was wondering if someone might be able to help me out. I have been using monero since last summer and never had any issues sending coins, however yesterday afternoon (about 24 hours ago) I sent XMR from one of my wallets to another one of my wallets with simplewallet synced via bitmonerod. The transaction said "money successfully sent", but the coins never showed up in my receiving address. Not only that, but 24 hours later I still have a difference between my locked and unlocked balances in the sending wallet. I sent 1200 coins with a mixin of 5. Has anyone else experienced anything like this before, or I am just screwed?
Not sure what to do here given I have over 1200 XMR in limbo right now that cannot be accessed or seen, so any help of any kind would be greatly appreciated.
Thanks for your help ahead of time. Happy Holidays!
AKW
Perhaps a stupid question, but have you actually refreshed both of your wallets? If not, just type refresh in simplewallet (make sure bitmonerod is fully synced). Also, what happened to your other account? Not Stupid! The answer is yes, I was refreshing about every 2 minutes while synced with bitmonerod. From right when the coins where sent until right now some of the coins in wallet 1 are still locked from this tx, and in wallet 2 there is nothing. No coins have been received. BTW, I have sent between these two wallets multiple time, even recently, with no issues. I am positive the address was correct. Any ideas?! I'm kind freaking out... Cheers! I have had this happen to me before. I was using a usb-ethernet dongle and I was refreshed/current with the network, but right before I sent the coins the dongle lost power or something and the transaction never actually went through, though it said it did on my simplewallet. I only figured out what happened about a month later when it happened again and I watched the lights of the dongle go out and put 2 and 2 together. Turns out the funds never left the wallet to begin with, it just looked like it did. Check to see if you have the same amount of monero as before you sent the transaction, maybe check your log or something, but i feel like this is the same thing that happened to me, hope so at least. According to the reddit thread, something similiar happened. The coins are back in his original wallet, so the issue is resolved :-)
|
|
|
|
GingerAle
Legendary
Offline
Activity: 1260
Merit: 1008
|
|
December 25, 2015, 09:59:08 PM |
|
|
|
|
|
smooth
Legendary
Offline
Activity: 2968
Merit: 1198
|
|
December 25, 2015, 10:02:33 PM |
|
Nice work by Wolf0. It sounds like his open source miner is reasonably competitive with the closed source Claymore miner now.
|
|
|
|
|