[ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN!

[Spoetnik]

Anyone can give a link for compiled ccminer 0.6 PLS ?  

i can but these guys keep saying it's on chubners forum thread so lol
you have to build it for kepler or fermi i think so what am i building guys ?
so far i only compiled the fermi one..

also OP your comment about the miner on page 1 are a bit confusing what is 2d ?
and the greater that symbol is reversed to me.. lol
use xyz miner  >  6000
shouldn't that be the other way around ?

also OP are you saying there is now going to be a sha3 only hashing version STILL after block 6000 ?

i am confuuuused  


edit:
ALSO NO the network hash rate is normal..

 8,269,002,742
 6,240,549,222
 1,247,405,178
 2,236,059,567
 5,326,788,146
 2,361,229,074
12,078,334,732
 7,733,181,525
12,119,981,497
 9,093,852,712
 9,991,409,021

that is past 2/3 days or so.. so it's lower than it was this morning actually..

[xojex]

@xojex.. i just checked both forums and see nothing at all what so ever about a version called v0.6.1
nor do i see one compiled for the public except a Mac version..

https://bitcointalk.org/index.php?topic=167229.msg6426705#msg6426705

I don't know nvidia product architecture well enough to tell you what version of ccminer to use with your 550ti. You've already compiled a version, so probably got the right version for your card.

My 5x750ti rig is running about 30Mh/s solo mining Jackpot. Went 12 hours without finding a block earlier today. That was the longest empty stretch. One card, 30+ hours? I would move on.

[crypto-rainbow]

Anyone can give a link for compiled ccminer 0.6 PLS ?  

i can but these guys keep saying it's on chubners forum thread so lol
you have to build it for kepler or fermi i think so what am i building guys ?
so far i only compiled the fermi one..

also OP your comment about the miner on page 1 are a bit confusing what is 2d ?
and the greater that symbol is reversed to me.. lol
use xyz miner  >  6000
shouldn't that be the other way around ?

also OP are you saying there is now going to be a sha3 only hashing version STILL after block 6000 ?

i am confuuuused  


edit:
ALSO NO the network hash rate is normal..

 8,269,002,742
 6,240,549,222
 1,247,405,178
 2,236,059,567
 5,326,788,146
 2,361,229,074
12,078,334,732
 7,733,181,525
12,119,981,497
 9,093,852,712
 9,991,409,021

that is past 2/3 days or so.. so it's lower than it was this morning actually..

I think it's safer to use "recommended" version (v2d/v2s) so they suppose to work both before and after block 6000.

[kondiomir]

Anyone can give a link for compiled ccminer 0.6 PLS ?  

i can but these guys keep saying it's on chubners forum thread so lol
you have to build it for kepler or fermi i think so what am i building guys ?
so far i only compiled the fermi one..

also OP your comment about the miner on page 1 are a bit confusing what is 2d ?
and the greater that symbol is reversed to me.. lol
use xyz miner  >  6000
shouldn't that be the other way around ?

also OP are you saying there is now going to be a sha3 only hashing version STILL after block 6000 ?

i am confuuuused  


edit:
ALSO NO the network hash rate is normal..

 8,269,002,742
 6,240,549,222
 1,247,405,178
 2,236,059,567
 5,326,788,146
 2,361,229,074
12,078,334,732
 7,733,181,525
12,119,981,497
 9,093,852,712
 9,991,409,021

that is past 2/3 days or so.. so it's lower than it was this morning actually..

Need it for GTX 680.

[Spoetnik]

@xojex
you didn't get anything i said at all man.. never mind

[Spoetnik]

Anyone can give a link for compiled ccminer 0.6 PLS ?  

i can but these guys keep saying it's on chubners forum thread so lol
you have to build it for kepler or fermi i think so what am i building guys ?
so far i only compiled the fermi one..

Need it for GTX 680.

well i can do it easily enough but i found what he said a bit confusing and a tad odd i know chubner is reading the ANN topic and not helping at all.
it's his nvida miner.. bug him and if he doesn't want to help then i will..

edit:
i'm also not sure it matters because block 6000 is like 350 blocks away now.. see what i mean ?

[dfox101]

12.5 millions jackpot? crap, hope I will get it

[Spoetnik]

12.5 millions jackpot? crap, hope I will get it

don't be greedy !

that jackpot is reserved for me

edit:
i tried while back compiling ccminer with define set to one but i left the compute at 3.5 and it *seemed to work on my Fermi card..
BUT when i just not switched it to compute 2.0 in the cuda project settings and recompiled and ran it my card loads and then shuts off
see here for info from dev on how to compile it etc..
http://www.cudaminers.net/forum/ccminer-v0-6-thread.html
it says this..

on Windows this should now be built in four flavours, when done correctly:

Compute 2.0 with #define MAXWELL_OR_FERMI 1 <-- Fermi
Compute 3.0 with #define MAXWELL_OR_FERMI 0 <-- old Kepler
Compute 3.5 with #define MAXWELL_OR_FERMI 0 <-- highend Kepler and GT630/640 with compute 3.5
Compute 3.5 with #define MAXWELL_OR_FERMI 1 <-- for Maxwell

edit:
it's some bs with Afterburner and sgminer running.. now for some weird reason only one or the other will run.
fuck this shit is a pain the god damn ass lol

[dfox101]

12.5 millions jackpot? crap, hope I will get it

don't be greedy !

that jackpot is reserved for me
[snip]

lol, yes wish you luck 

[Spoetnik]

new network hash rate high i think..
13,232,267,686 hp/s which i think is 13.2 gh/s ..no matter how many times i ask people won't confirm or deny that so i dunno lol
one guy said i think so last August on Cryptsy chat when i asked around lol
i ALWAYS find it funny how there is SOOOOO many experts until you ask a question lol
then ... silence hahha

edit:
and good luck to you too dfox101

[bigjme]

ccminer 0.6.1, the one posted in Christian's thread.

lmao its actually ccminer 0.6 with a small fix, i just called it 0.6.1 because i could  
ooo and this should work for your 680 kondiomir

https://mega.co.nz/#!BstlBaKJ!kIRU2EVLmnt-Uw6mDt7nwau3Utq4iqM1t9bLTPHzIk4

[Spoetnik]

thanks for clearing up that version question

oh and..

{
"blocks" : 5884,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 76.06597811,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 7822048403,
"pooledtx" : 0,
"testnet" : false
}

[Spoetnik]

can someone explain what the hell the op means ? the miner explanation doesn't make sense in about 3 or 4 ways..

[bigjme]

can someone explain what the hell the op means ? the miner explanation doesn't make sense in about 3 or 4 ways..

im pretty sure right now just use a miner that runs keccak. i may be wrong

current jackpot is around 13million btw

[zuludrag]

can someone explain what the hell the op means ? the miner explanation doesn't make sense in about 3 or 4 ways..

OP: In simple words - it's the first post of the thread

[Spoetnik]

buddy that was retarded
read what i said.. why would i ask what the OP means if i didn't read the fucking OP ? LOL
wow that was dumb lol

[Spoetnik]

can someone explain what the hell the op means ? the miner explanation doesn't make sense in about 3 or 4 ways..

im pretty sure right now just use a miner that runs keccak. i may be wrong

current jackpot is around 13million btw

they all do 

[zuludrag]

Having problems with wallet QT for windows. Using version 1.1 and it hangs from time to time: i find it frozen: solo miner can't find it, and qt window does not respond. Sometimes it's enough to kill the process and start it again. Sometimes I need to clean data folder to make it work.

By the way:
It's clear that ccminer finds blocks well in solo.
Old version of full sgminer was finding blocks too. Does anybody with sgminer found any blocks in the last 24h? What version of miner you were using?

And about the pools: as I understand, part of submitting shares works. But how about the part that submits the block to the network? Does the pool gets found block from miners and can't submit it to the network, or pools even don't get the found block from miners? Maybe problem is in the miner?..

[zuludrag]

buddy that was retarded
read what i said.. why would i ask what the OP means if i didn't read the fucking OP ? LOL
wow that was dumb lol

Sorry, did not understood it right. I'm not native English speaker

[bigjme]

If they all do then use any, OP is clearly confusing stuff. Alsong as it mines keccak you shouldnt see a difference