[ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN!

[djm34]

Hi,

I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.

It was tested on my R9-290x at 1050MHz.

The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.

So it is an increase between 50% and 100% depending on the drivers you currently use.

This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress

The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg

To use the algo: sgminer --kernel jpc -o pool -u password


Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:

JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

A bounty from jackpotcoin dev would be good too 

Nice work!
I saw your another tweaked sgminer in talkcoin thread.
Improved hashrate is almost same to that of talkcoin's one
Of course they are basically identical algo, right?
Now I'm just wondering that there is difference between NIST5 algo used in talkcoin and JHA of jackpotcoin.
I think only difference is hashing order (BLAKE, JH, Skein, ...)
If this is true, it seems that talkcoin is successor of jackpotcoin in algo perspective. (jackpotcoin was launched earlier)

Thanks,
In terms of individual algo they are the same (the 5 finalists of the nist contest) however the way they are used is different as in jpc it is keccak followed by three random rounds of groesl or skein and  blake or JH.

(however the individual algo are found in many ex cpu only coin like quark, hvc, X11 etc... )

[Litoshi]

NICE........ My hash rate went from 12MH to 19 on my 4 290s.  Will be mining to your JPC today as payment.  Hashharder.

Yeesh, that's still pretty rough. Surely there are better mining options for AMD cards.

Yes, I can mine SHA3 coins at 1.5GH.  Temp only hits 76 degrees max. 

Scrypt coins cause CGWatcher to constantly lower the intensity to 14 and even shut a card down.  When it was 17 degrees outside, it was easy to keep the cards cool when set by an open window. 

What hash rate do Gforce cards get on SHA3, MAXcoin for example?

[Parja]

What hash rate do Gforce cards get on SHA3, MAXcoin for example?

Haven't tried it myself, but according to the info here (http://cudamining.cc/url/configurations), it looks like about 150Mh/s on a 750Ti.

For reference, my 4 750Ti rig does about 22Mh/s on JPC and only draws about 240W total.

[nomad1109]

Don't know if it got mentioned or not.. maybe I just missed it, but it looks like we passed the 50% mined mark recently...

51.02 mined as of my writing of this.

Still a whole lot of coins to go, but as things slow down with the block reward I think those holding on to the stake coins will start to see all their work pay off if the coin can find it's demand and difficulty sweet spot.

Anyone feel like they have too many coins and want to sell me back the 10.8 million JPC I sold @ 2 sat? Just PM me!

[smulork]

Hi,

I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.

It was tested on my R9-290x at 1050MHz.

The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.

So it is an increase between 50% and 100% depending on the drivers you currently use.

This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress

The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg

To use the algo: sgminer --kernel jpc -o pool -u password


Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:

JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

A bounty from jackpotcoin dev would be good too  

Nice job, from 2,3 MH/s to 2,5 MH/s at my R9 280x GPUs Continue improvements buddy

which drivers ? 14.6 drivers should give you more than that

Nice job again  
I went from 2.4Mhash to 4.3Mhash on a 280x and still using 13.12 drivers.
Just copied AMD_ocl and AMD_opencl files from 14.6 to the miners directory and everything works perfectly.

Hi, my rig works on a fake copy of windows 8 with 6x 280x gpus using 13.12 drives. im not able to upgrade to windows 8.1 so does anyone knows how to trick the windows and possibly replace files from  drives 14.6 beta to the ones i have??? thanks in advance...
Im getting about 3100khs each card, sapphire 280x toxic.

[Litoshi]

Hi,

I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.

It was tested on my R9-290x at 1050MHz.

The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.

So it is an increase between 50% and 100% depending on the drivers you currently use.

This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress

The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg

To use the algo: sgminer --kernel jpc -o pool -u password


Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:

JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

A bounty from jackpotcoin dev would be good too  

Nice job, from 2,3 MH/s to 2,5 MH/s at my R9 280x GPUs Continue improvements buddy

which drivers ? 14.6 drivers should give you more than that

Nice job again  
I went from 2.4Mhash to 4.3Mhash on a 280x and still using 13.12 drivers.
Just copied AMD_ocl and AMD_opencl files from 14.6 to the miners directory and everything works perfectly.

Hi, my rig works on a fake copy of windows 8 with 6x 280x gpus using 13.12 drives. im not able to upgrade to windows 8.1 so does anyone knows how to trick the windows and possibly replace files from  drives 14.6 beta to the ones i have??? thanks in advance...
Im getting about 3100khs each card, sapphire 280x toxic.

under properties, you can set sgminer to emulate W7.  This MAY allow you to change the drivers in Device manager to the beta 14.6.

W7, BTW, may only support 4 cards.  My rig would not accept a 5th card.

[smulork]

i only managed to work with 6 gpus on windows 8.0 with 13.12 drivers. nothing else would work. now with this  new performance driver amd 14.6 beta i dont think this new driver would detect all my 6 gpus, so must be a way to extract some new files from driver 14.6 and replace them with my current drives, possibly.
Any ideias???

[Litoshi]

i only managed to work with 6 gpus on windows 8.0 with 13.12 drivers. nothing else would work. now with this  new performance driver amd 14.6 beta i dont think this new driver would detect all my 6 gpus, so must be a way to extract some new files from driver 14.6 and replace them with my current drives, possibly.
Any ideias???

IDEA:  2nd MB

[AliMan]

I'm guessing, seeing the normal course of voting, I'm guessing two more weeks until Mintpal?

[zuludrag]

By the way, looks like faucet dried out...

[omahapoker]

were #3 on mintpal. keep up the good work

[axsdf]

Anyone feel like they have too many coins and want to sell me back the 10.8 million JPC I sold @ 2 sat? 

[adaseb]

All my rigs are messed up because of this 14.6 drivers.

They hang or don't install properly. I wish everything was left as before.

[JackpotCoin]

You can now vote for JackpotCoin on Bter!
https://bter.com/voting

[yellowduck2]

JPC need new development or else it will slowly die off. Any upcoming update ?

[adaseb]

If you have an old 5xxx or 6xxx card and you upgrade to the new 14.16 driver, you need to use -kernel jackpotcoin and NOT jpc.

JPC will cause huge instability, lower hash and HW errors.


Seems to benefit R9 and 7xxx cards the most.

[roushonul]

have 77mh/s. Want to solo mining. Any advice?

Solo mining is basically mining to your wallet.  Look on the first page for how to set up the jackpot.conf file.  I'd suggest setting your rpcallowip to 127.0.0.1 if you're mining on the same machine as wallet, or 192.168.1.* if you trust your lan security and will be using multiple rigs.  make sure you have a proper user and password too, I've heard of people losing their funds due to poor security on their wallet with rcp.  Also, it's not worth solo mining, even with 77mh at this point.  Join a pool with low fees.  https://www.minep.it/pool/jpc/ has a great ui, great performance, and 0.75% fee. 

Hi
   I try solo mining for sometime but it seems gtx 780 has other thing in its mind. Speed just drop. I am now mining at www.minep.it. The return is good so far or I say in same like dwarf pool but what worries me the luck of this pool. I am really confused of this pool. In one hand the luck it is getting is terrible. See the last 5 block finding stat:

295,601    KaevurMati            6/24 3:04:05 AM    1132.60% (65,799,332)
294,707    liomojo                    6/23 11:41:48 PM    498.98% (25,118,000)
294,388    crazybean                    6/23 10:24:11 PM    15.98% (657,616)
294,383    liomojo                    6/23 10:22:49 PM    136.35% (5,544,968)
294,312    23430502DDS33    6/23 10:05:52 PM    1020.30% (53,366,016) 

Only one block under 100% and most strange thing is I am getting same reward what I can get from other pool or specially dwarf pool.

Thanks
Rony

Doing solo mining with my hash(80 Mh/s) and 3 blocks in less than in 24 hour. I see when I post my solo mining result it generally get decrease but still posting( ).

[Criss]

Hi,

I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.

It was tested on my R9-290x at 1050MHz.

The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.

So it is an increase between 50% and 100% depending on the drivers you currently use.

This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress

The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg

To use the algo: sgminer --kernel jpc -o pool -u password


Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:

JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

A bounty from jackpotcoin dev would be good too  

Nice job, from 2,3 MH/s to 2,5 MH/s at my R9 280x GPUs Continue improvements buddy

which drivers ? 14.6 drivers should give you more than that

It was 13.4, now after changing it to 14.6 hashing jumped on 4.3 MH/s with each MSI R9 280X Gaming Ed. card and the Intensity of 18. NICE WORK

[S_tring]

Could anyone help with the wallet installation on Ubuntu? Getting an error when trying to make :

Code:

//lib/x86_64-linux-gnu/libdl.so.2: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make: *** [jackpotcoin-qt] Error 1

[Litoshi]

Hi,

I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.

It was tested on my R9-290x at 1050MHz.

The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.

So it is an increase between 50% and 100% depending on the drivers you currently use.

This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress

The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg

To use the algo: sgminer --kernel jpc -o pool -u password


Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:

JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze

A bounty from jackpotcoin dev would be good too  

NICE........ My hash rate went from 12MH to 19 on my 4 290s.  Will be mining to your JPC today as payment.  Hashharder.

THANKS .......... I mined hashharder for you... 3169 JPC went to your wallet