[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[toptek]

for anyone inserted i had minera 7.0 using GPU's to mine ETH with Ubuntu 16.4 some what, lost interest after i saw you can and went back to using windows and it seemed for me using Ubuntu 16.10  had major PHP issue.

[1714131957]

1714131957

[1714131957]

1714131957

[1714131957]

1714131957

[giantkin]

ok, i've been mining away for a few days just fine.

i added a 2nd pool , im assuming it would switch over on fail of the first one.

I decided to swap the pools, so i hit Select this.   it worked fine, and started hashing on the new pool

did htat for a few days.

i come into room today, its warm,  i sign in, its working roughly like it should.

later on, i check the wallet and no coin being sent.  odd. so i check pool its up, but my wallet isnt listed.

i open up minera.  its on other pool, (which would be fine ofc)  but this pool listing is totally gone...

was i supposed to do something, so it keeps both pools listed?  i was hoping to put like 10 pools in the list, and switch based on desire.

thanks
gk

[michelem]

ok, i've been mining away for a few days just fine.

i added a 2nd pool , im assuming it would switch over on fail of the first one.

I decided to swap the pools, so i hit Select this.   it worked fine, and started hashing on the new pool

did htat for a few days.

i come into room today, its warm,  i sign in, its working roughly like it should.

later on, i check the wallet and no coin being sent.  odd. so i check pool its up, but my wallet isnt listed.

i open up minera.  its on other pool, (which would be fine ofc)  but this pool listing is totally gone...

was i supposed to do something, so it keeps both pools listed?  i was hoping to put like 10 pools in the list, and switch based on desire.

thanks
gk

The new Minera has a better management of pools, what kind of miners do you have? I could give you access to the new beta if you are interested.

[giantkin]

i have a Falcon  27mhs from  Gawminer roughly equal to the thunderx6

and my other is the bitmain's antminer S5  - just bought a new psu for, and gotta hook up yet.

my skill level waxes and wanes.   would have to be pretty much plug n play for me.
took me a few years to get the raspberrypi to work at all for me.

(starting with the included software, that didnt quite work right.)
dont recall versions, but even yours.
I tried every img i could. all failed in diff ways.
--yours kept overwriting the pool with another pool, if i recall correctly.

one would show garbled, another it wasnt setup for the zeus(?) settings?

  on and on

Ended up keeping it linked to a notebook, and just leaving it on.  (it finally died when i turned it on last month)
   A 'CLICK"   then BANG.   then click click..  click click heh   hd fail.

g

[digitalgrow]

Hi Minera miners

Im having troubles with my zeusminers mining with Minera and wondering if I can get some assistance

I have 3 x Zeusminer Thunder at 28 M/Hz. Two of these run fine on Minera and it picked them up pretty much straight away after inputting the correct settings. However the third miner is not being picked up on Minera and after checking the real time log I can see this error message coming up continously:

Zeus Detect: Test failed at /dev/ttyUSB2: got 00000000, should be: 00038d26

Could anyone please help me try to resolve the issue as Ive tried a few things and its not resolved

I also have 30 x Zeusminer ThunderX2 at 20 M/Hz which are not working also and I assume its the same error message as above

EDIT: Gridseeds and Blizzard have all been tested and working on Minera using the same connectors, usb and pi as used on Thunders, however 4 Thunders still not working

Many thanks in advance for any help  

[giantkin]

wish i could help.

then again, i wish i had the Solar power electric to run all of those, instead of my single unit! lol

probably neeed a SS of the log... or
isnt there a -debug command u can do, give more details to drop to  a log?

that might help M better ..to help you.

(just spitballing)

g

[digitalgrow]

wish i could help.

then again, i wish i had the Solar power electric to run all of those, instead of my single unit! lol

probably neeed a SS of the log... or
isnt there a -debug command u can do, give more details to drop to  a log?

that might help M better ..to help you.

(just spitballing)

g

Many thanks for your reply

I will certainly try and get a copy of the log up asap and see if it helps

[giantkin]

Sure!  9course  M,  might say it was  a waste of time... but til he does.. its a good a plan as any

gk

[zOU]

Hi Minera miners

Im having troubles with my zeusminers mining with Minera and wondering if I can get some assistance

I have 3 x Zeusminer Thunder at 28 M/Hz. Two of these run fine on Minera and it picked them up pretty much straight away after inputting the correct settings. However the third miner is not being picked up on Minera and after checking the real time log I can see this error message coming up continously:

Zeus Detect: Test failed at /dev/ttyUSB2: got 00000000, should be: 00038d26

Could anyone please help me try to resolve the issue as Ive tried a few things and its not resolved

I also have 30 x Zeusminer ThunderX2 at 20 M/Hz which are not working also and I assume its the same error message as above

EDIT: Gridseeds and Blizzard have all been tested and working on Minera using the same connectors, usb and pi as used on Thunders, however 4 Thunders still not working

Many thanks in advance for any help  

google gives plenty of answersa with the error message

try this one:
http://bitcoin.stackexchange.com/questions/29493/neither-cgminer-nor-bfgminer-detect-my-zeusminer-blizzard-ubuntu-linux-mint

[jmccall005]

Good Day!

Installed the latest minera image on Raspberry Pi, but I am unable to access the url path. I am able to SSH into the RaspberryPi using the IP address, but cannot do anything after inputting the password.

Using Thunder X6 by Zeusminer  (Low-Power Scrypt ASIC Miner)

Please help,

Thanks!

[zOU]

Good Day!

Installed the latest minera image on Raspberry Pi, but I am unable to access the url path. I am able to SSH into the RaspberryPi using the IP address, but cannot do anything after inputting the password.

Using Thunder X6 by Zeusminer  (Low-Power Scrypt ASIC Miner)

Please help,

Thanks!

try that:
https://bitcointalk.org/index.php?topic=596620.msg13233288#msg13233288

[giantkin]

First..simple thing to try...

do another image on another card.   and try again.

I've done about 10 image 'burns' and 7 of them were good.

for whatever reason.


(or if u only  have the one card, just rewrite on it)

its the easiest fix.  if that fails...still...then go on

GL

g

[Athomson]

  I am new and think I have set up Minera correctly. I have a Pi B, a powered hub and two gekkoscience sticks with a USB fan. I am using CGMiner and getting 20+ Gh/s with both gekkos detected and I have triple checked the pool and user name. I have a share value of 37700+ but after 15 minutes no Shares accepted. Have I missed a setting or being too quick in checking?

Andy

[digitalgrow]

Sure!  9course  M,  might say it was  a waste of time... but til he does.. its a good a plan as any

gk

Thank you, lets hope we can get it fixed

[digitalgrow]

Hi Minera miners

Im having troubles with my zeusminers mining with Minera and wondering if I can get some assistance

I have 3 x Zeusminer Thunder at 28 M/Hz. Two of these run fine on Minera and it picked them up pretty much straight away after inputting the correct settings. However the third miner is not being picked up on Minera and after checking the real time log I can see this error message coming up continously:

Zeus Detect: Test failed at /dev/ttyUSB2: got 00000000, should be: 00038d26

Could anyone please help me try to resolve the issue as Ive tried a few things and its not resolved

I also have 30 x Zeusminer ThunderX2 at 20 M/Hz which are not working also and I assume its the same error message as above

EDIT: Gridseeds and Blizzard have all been tested and working on Minera using the same connectors, usb and pi as used on Thunders, however 4 Thunders still not working

Many thanks in advance for any help  

google gives plenty of answersa with the error message

try this one:
http://bitcoin.stackexchange.com/questions/29493/neither-cgminer-nor-bfgminer-detect-my-zeusminer-blizzard-ubuntu-linux-mint

Thanks for the link, seems like I am still having no joy after reading through similar ppl having same error message

[digitalgrow]

Hi Minera miners

Im having troubles with my zeusminers mining with Minera and wondering if I can get some assistance

I have 3 x Zeusminer Thunder at 28 M/Hz. Two of these run fine on Minera and it picked them up pretty much straight away after inputting the correct settings. However the third miner is not being picked up on Minera and after checking the real time log I can see this error message coming up continously:

Zeus Detect: Test failed at /dev/ttyUSB2: got 00000000, should be: 00038d26

Could anyone please help me try to resolve the issue as Ive tried a few things and its not resolved

I also have 30 x Zeusminer ThunderX2 at 20 M/Hz which are not working also and I assume its the same error message as above

EDIT: Gridseeds and Blizzard have all been tested and working on Minera using the same connectors, usb and pi as used on Thunders, however 4 Thunders still not working

Many thanks in advance for any help  

Hello friends

Sorry for the late reply on this, Im still having the same problems as above, as requested here is the log file

[2016-11-02 22:26:32] Started cgminer 4.3.5-scrypt.2
 [2016-11-02 22:26:32] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2016-11-02 22:26:45] Zeus Detect: Test failed at /dev/ttyUSB0: got 00000000, should be: 00038d26
 [2016-11-02 22:26:45] No devices detected!
 [2016-11-02 22:26:45] Waiting for USB hotplug devices or press q to quit
 [2016-11-02 22:26:45] Probing for an alive pool
 [2016-11-02 22:26:45] Pool 0 difficulty changed to 1024
 [2016-11-02 22:26:46] Network diff set to 2.65K
 [2016-11-02 22:26:47] Stratum from pool 0 requested work restart
 [2016-11-02 22:26:49] Network diff set to 110
 [2016-11-02 22:26:49] Stratum from pool 0 detected new block
 [2016-11-02 22:26:51] API running in IP access mode on port 4028 (12)
 [2016-11-02 22:26:55] Network diff set to 108
 [2016-11-02 22:26:55] Stratum from pool 0 detected new block
 [2016-11-02 22:26:55] Stratum from pool 0 requested work restart
 [2016-11-02 22:26:56] Stratum from pool 0 requested work restart
 [2016-11-02 22:26:56] Stratum from pool 0 requested work restart
 [2016-11-02 22:27:01] Network diff set to 104
 [2016-11-02 22:27:01] Stratum from pool 0 detected new block
 [2016-11-02 22:27:03] Zeus Detect: Test failed at /dev/ttyUSB0: got 00000000, should be: 00038d26
 [2016-11-02 22:27:03] Network diff set to 114
 [2016-11-02 22:27:03] Stratum from pool 0 detected new block
 [2016-11-02 22:27:05] Stratum from pool 0 requested work restart
 [2016-11-02 22:27:08] Stratum from pool 0 requested work restart
 [2016-11-02 22:27:16] Stratum from pool 0 requested work restart
 [2016-11-02 22:27:21] Zeus Detect: Test failed at /dev/ttyUSB0: got 00000000, should be: 00038d26
 [2016-11-02 22:27:28] Network diff set to 110
 [2016-11-02 22:27:28] Stratum from pool 0 detected new block
 [2016-11-02 22:27:29] Stratum from pool 0 requested work restart
 [2016-11-02 22:27:32] Network diff set to 107
 [2016-11-02 22:27:32] Stratum from pool 0 detected new block
 [2016-11-02 22:27:39] Zeus Detect: Test failed at /dev/ttyUSB0: got 00000000, should be: 00038d26

Any help to resolve the issue will be much appreciated

[digitalgrow]

hi friends

Everything seems to be ok now, I did a bit of mechanic work and have all Thunder up and running now Thanks for all the help!

[giantkin]

what was wrong?

Glad its working btw.  but what was it. (so that if someone has that same issue, they find your fix)


  gk

[digitalgrow]

I opened up the miner for thunder 30mh
and it seemed some of the cables going in the power supply had become loose
once i unplugged everything and replugged
everything worked fine
and the thunder x6 20mh
i was using the wrong settings
thank you all for you help
i am now happily mining again

[giantkin]

awesome

easy fix.  (and one of the first things in my list of things todo when repairing stuff)

1) check the plug.
2) check the power cable from the plug to the unit.
3) check powersupply has power going in ...AND
4) Out.
5)  check connections...
and on and on

damn Vending machines lol

g