michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
April 30, 2015, 03:17:55 PM |
|
when you install latest minera 0.5.0 on your raspberry pi 2 model b what options are enabled in your default cgminer I would like to know is --enable-bmsc enabled thank you Just look this line https://github.com/michelem09/minera/blob/master/build_miner.sh#L40No it's not enabled, you must re-build cgminer
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
April 30, 2015, 04:07:19 PM |
|
tnx for quick replay
can you explain me when I install minera on rasp pi and start it what do I need to do to recompile cgminer
Just change line 40 to what you need to configure then run it cd /var/www/minera ./build_miner.sh cgminer
|
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
April 30, 2015, 04:39:47 PM |
|
ok guys i m having trouble with minera 5 after recent changes: My setup Rpi SD card (to boot Rpi only) USB drive (for Wheezy + Minera) USB hub (with Gridseed orbit + GAW furys) after recent installation with above setup my usb hub is not getting detected and in result Minera shows no devices attached. however it detects network miners but not the local miners; no matter whatever setting (pre-configuered) and the binary i choose no local devices could be found any advise? EDIT: following is connected with the RPi output via "lsusb" http://prntscr.com/6zuh51bumping it sorry but i need to fix this thing
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
April 30, 2015, 07:55:44 PM |
|
ok guys i m having trouble with minera 5 after recent changes: My setup Rpi SD card (to boot Rpi only) USB drive (for Wheezy + Minera) USB hub (with Gridseed orbit + GAW furys) after recent installation with above setup my usb hub is not getting detected and in result Minera shows no devices attached. however it detects network miners but not the local miners; no matter whatever setting (pre-configuered) and the binary i choose no local devices could be found any advise? EDIT: following is connected with the RPi output via "lsusb" http://prntscr.com/6zuh51bumping it sorry but i need to fix this thing Hub seems to be found correctly don't know what to suggest you, is it a fresh install from image file? Can you try with only one hub connected?
|
|
|
|
kevin1234a
Legendary
Offline
Activity: 1162
Merit: 1000
Decentralizing Jesus on the Blockchain
|
|
April 30, 2015, 09:59:33 PM |
|
ok guys i m having trouble with minera 5 after recent changes: My setup Rpi SD card (to boot Rpi only) USB drive (for Wheezy + Minera) USB hub (with Gridseed orbit + GAW furys) after recent installation with above setup my usb hub is not getting detected and in result Minera shows no devices attached. however it detects network miners but not the local miners; no matter whatever setting (pre-configuered) and the binary i choose no local devices could be found any advise? EDIT: following is connected with the RPi output via "lsusb" http://prntscr.com/6zuh51bumping it sorry but i need to fix this thing Hub seems to be found correctly don't know what to suggest you, is it a fresh install from image file? Can you try with only one hub connected? yes fresh installation, it worked well with hub once i detach usb drive but entire minera file system is on USB instead of SD card BTW i followed this articlle to move my file system to USB drive https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=44177
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
May 01, 2015, 05:15:34 AM |
|
ok guys i m having trouble with minera 5 after recent changes: My setup Rpi SD card (to boot Rpi only) USB drive (for Wheezy + Minera) USB hub (with Gridseed orbit + GAW furys) after recent installation with above setup my usb hub is not getting detected and in result Minera shows no devices attached. however it detects network miners but not the local miners; no matter whatever setting (pre-configuered) and the binary i choose no local devices could be found any advise? EDIT: following is connected with the RPi output via "lsusb" http://prntscr.com/6zuh51bumping it sorry but i need to fix this thing Hub seems to be found correctly don't know what to suggest you, is it a fresh install from image file? Can you try with only one hub connected? yes fresh installation, it worked well with hub once i detach usb drive but entire minera file system is on USB instead of SD card BTW i followed this articlle to move my file system to USB drive https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=44177The problem could be that, I really don't have time to look well at that guide, but it seems it overrides USB configs, so please use an SD Card and the standard Minera image file on it, otherwise I cannot give you any support.
|
|
|
|
Truman
Legendary
Offline
Activity: 826
Merit: 1000
|
|
May 05, 2015, 01:31:47 PM |
|
My minera dashboard is not loading with data. Only cycles...
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
May 05, 2015, 01:52:46 PM |
|
My minera dashboard is not loading with data. Only cycles...
If you updated from a previous version run these commands in a SSH terminal: redis-cli del altcoins_update redis-cli del altcoins_data redis-cli del dashboard_coin_rates redis-cli del cryptsy_data redis-cli del cryptsy_update Then wait a couple of minutes, go to settings, check you have at least 1 altcoin selected and SAVE. If this doesn't work, please start from a fresh 0.5.0 image file http://getminera.com/download/latest
|
|
|
|
Truman
Legendary
Offline
Activity: 826
Merit: 1000
|
|
May 05, 2015, 01:56:42 PM |
|
Thank you. Now my R Box 2 is not recognizied anymore. Before the update it was working fine!
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
May 05, 2015, 01:57:58 PM |
|
Thank you. Now my R Box 2 is not recognizied anymore. Before the update it was working fine!
Cgminer? Config? Log?
|
|
|
|
Truman
Legendary
Offline
Activity: 826
Merit: 1000
|
|
May 05, 2015, 02:01:27 PM |
|
[2015-05-05 16:00:43] Started cgminer 4.9.1 [2015-05-05 16:00:45] Need to specify at least one pool server. But the pool is correct! 100%
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
May 05, 2015, 02:03:18 PM |
|
[2015-05-05 16:00:43] Started cgminer 4.9.1 [2015-05-05 16:00:45] Need to specify at least one pool server. But the pool is correct! 100% Ah ok, you need to turn on the option "Append JSON conf (-c /var/www/minera/conf/miner_conf.json)" in the settings page EDIT: oh well, I saw a possible bug, if you have "manual" config insteadd "guided" one, you need to put this option in the manual textarea, because you don't have the "Append JSON conf" toggle: -c /var/www/minera/conf/miner_conf.json
|
|
|
|
Truman
Legendary
Offline
Activity: 826
Merit: 1000
|
|
May 05, 2015, 02:05:21 PM |
|
Works, thank you! (=
|
|
|
|
michelem (OP)
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
May 05, 2015, 02:50:22 PM |
|
Works, thank you! (=
You are welcome, glad it works! And, hey guys, today Minera is 1 year old! Happy birthday Minera!
|
|
|
|
Truman
Legendary
Offline
Activity: 826
Merit: 1000
|
|
May 05, 2015, 02:58:07 PM |
|
Congratulations! Is there any way to get minera running on a windows pc? I found the network miner section, great!
|
|
|
|
|
Dexter770221
Legendary
Offline
Activity: 1029
Merit: 1000
|
|
May 05, 2015, 04:58:46 PM |
|
.... And, hey guys, today Minera is 1 year old! Happy birthday Minera! Congrats.
|
Under development Modular UPGRADEABLE Miner (MUM). Looking for investors. Changing one PCB with screwdriver and you have brand new miner in hand... Plug&Play, scalable from one module to thousands.
|
|
|
unamis76
Legendary
Offline
Activity: 1512
Merit: 1012
|
|
May 05, 2015, 05:12:36 PM |
|
Works, thank you! (=
You are welcome, glad it works! And, hey guys, today Minera is 1 year old! Happy birthday Minera! What a nice milestone! I bet it's awesome to look behind and see what you've accomplished so far. This is probably the best mining software/companion there is! Thank you and keep it up.
|
|
|
|
Bluecheese
Member
Offline
Activity: 104
Merit: 18
|
|
May 06, 2015, 02:18:23 AM |
|
Happy Birthday!
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
May 07, 2015, 09:11:19 AM |
|
Works, thank you! (=
You are welcome, glad it works! And, hey guys, today Minera is 1 year old! Happy birthday Minera! Congrats! It's made a beautiful development over this year. I remember installing the first version with my "good" old Gridseeds.
|
|
|
|
|