[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[michelem]

Hello,

2 small questions from a noob I use a raspberry pi 3b + with GekkoScience 2PAC 2x BM1384 USB Stick

1: What is the order (s) to update in minera.

2: Minera is usable with minergate, I can connect to it but I remain blocked at 12000 of difficulty.

Thank you in advance for your complaints and help

1: Best way is to download new image and install it in the SD Card

2: Never tried it, but i think you need to install the miner and use it as custom one, Minera hasn't it built-in.

EDIT: MinerGate is for GPU/CPU mining, you can't use it in a Raspberry and I don't think Minera can support it.

[1715289907]

1715289907

[1715289907]

1715289907

[1715289907]

1715289907

[1715289907]

1715289907

[Bienvu]

Thank you for this quick response.


concerning Minergate :

EDIT: MinerGate is for GPU/CPU mining, you can't use it in a Raspberry and I don't think Minera can support it.

this may be an update for Minera :

https://minergate.com/bitcoin-mining-pool


Regards, Pierre

[michelem]

Thank you for this quick response.


concerning Minergate :

EDIT: MinerGate is for GPU/CPU mining, you can't use it in a Raspberry and I don't think Minera can support it.

this may be an update for Minera :

https://minergate.com/bitcoin-mining-pool


Regards, Pierre

So just use that pool with your preferred miner, should work

[Bienvu]

Hello,

can I install Samba without other way to have remote access on minera (installed on raspberry b3 +) fixed ip.

thank you in advance, Pierre

[michelem]

Hello,

can I install Samba without other way to have remote access on minera (installed on raspberry b3 +) fixed ip.

thank you in advance, Pierre

Sure you can install what you want.

[yrk1957]

What's the default path to access web terminal?

[Bienvu]

Hello,
I use 5 Gekkosience 2pac with a Raspberry Pi3, cgminer-vthoang on slushpool.
the 5 keys work but I have 91.95% of Error / Rejected / rates, is there way to lower this percentage?
thank you in advance for all help

[naska21]

@michelem, hi. Whether Minera is in a position to control Ant-s S9 ? I have a very fond memory of Minerals dashboard full of  my G-Blades in the past. The title of your thread refers to Antminer, but the question is whether Minera is capable to   run Ant-s or just  watches them?

[michelem]

@michelem, hi. Whether Minera is in a position to control Ant-s S9 ? I have a very fond memory of Minerals dashboard full of  my G-Blades in the past. The title of your thread refers to Antminer, but the question is whether Minera is capable to   run Ant-s or just  watches them?

Minera can just monitor Antminer(s)

[tony9577442]

hi! it is normal i have add 100 antiner on the minera and now minera dont able to show me all of the information ? it's stuck on loading !? thank you

[troslky77]

Hi there,

Where is the problem if I got trough my localhost "page not found"?

Minera gives me 192.168.0.13/minera as a default page and after opened it got the result as above.

Everything I just installed, working on raspberry pi 3b+ / latest rasbian os, can someone give me a hint what I need to do ?

[Serion]

New user.  I setup Minera using BFMiner and using solo.ckpool.org.  I'm also using an Avalon Nano miner.  (I set this up as a 'lotto' machine)

Minera shows it's logging into the pool and is mining.  However, when I check my stats on ckpool, its not showing anything.  I can plug the stick into my PC and run BFminer and it'll show on the pool.  What gives?  I've double, triple checked my user ID/BTC address -- everything is as it should be.

I've even tried turning off, "append JSON conf" in settings.  However, it looks like it still using the JSON (as you can see below) even though Minera says, "Miner will start with this syntax:
/usr/bin/screen -dmS bfgminer /var/www/minera/minera-bin/bfgminer -o stratum+tcp://solo.ckpool.org:3333 -u 1FWFFjsqqoL6ZUq179dmt7stUgs5jEudwC -p x -S ICA:/dev/ttyACM0 --set-device ICA:baud=115200 --set-device ICA:reopen=timeout --set-device ICA:work_division=1 --set-device ICA:fpga_count=1 --set-device ICA:probe_timeout=100 --set-device ICA:timing=0.22 --api-listen
Warning you selected to not append the JSON conf."

This is from the log...

[2019-08-19 18:40:18] Started bfgminer 5.4.2-7-g9f781b87
 [2019-08-19 18:40:18] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2019-08-19 18:40:19] Found ICA 0 at /dev/ttyACM0
 [2019-08-19 18:40:19] Probing for an alive pool
 [2019-08-19 18:40:19] Testing pool stratum+tcp://solo.ckpool.org:3333
 [2019-08-19 18:40:20] Message from pool 0: Authorised, welcome to solo.ckpool.org 1FWFFjsqqoL6ZUq179dmt7stUgs5jEudwC!
 [2019-08-19 18:40:20] Stratum authorisation success for pool 0
 [2019-08-19 18:40:20] Pool 0 stratum+tcp://solo.ckpool.org:3333 alive
 [2019-08-19 18:40:20] Pool 0 is hiding block contents from us
 [2019-08-19 18:40:20] Network difficulty changed to 10.2T (72.90E)
 [2019-08-19 18:40:20] New block: ...e923482124fe84af diff 10.2T (72.90E)

[eZ3KIEL29]

Hello,

Thanks to Michelm for this dashboard.

I'm new in minera, i have the lastest version istalled 0.9.1
All is working well but i have an error to get "coins_profitability" from redis
error output
"[{\"symbol\":\"ltc\",\"coin\":\"litecoin\",\"algo\":\"scrypt\",\"reward\":25,\"difficulty\":11788933.15348738,\"blocks\":1688088,\"networkhashps\":297860806668585.8,\"btcValue\":0.00697497,\"price\":0.00697497,\"coin_profitability\":0.000042659855963606614,\"btc_profitability\":2.975512155504772e-7,\"timestamp\":1566313142,\"hashrate\":1000000},{\"symbol\":\"btc\",\"coin\":\"bitcoin\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":0,\"blocks\":0,\"networkhashps\":0,\"error\":{\"code\":\"ECONNREFUSED\",\"errno\":\"ECONNREFUSED\",\"syscall\":\"connect\",\"address\":\"144.76.40.144\",\"port\":3332},\"btcValue\":1,\"price\":1,\"coin_profitability\":null,\"btc_profitability\":null,\"timestamp\":1566313142,\"hashrate\":1000000},{\"error\":true,\"message\":\"Blockr data problem\",\"symbol\":\"bch\",\"coin\":\"bitcoin cash\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":0,\"blocks\":0,\"networkhashps\":0,\"coin_profitability\":0,\"btc_profitability\":0,\"timestamp\":1566313142,\"hashrate\":1000000}]"

after a little Ping from 144.76.40.144 this address is come from https://getminera.com/

How can i get coins_profitability working?
In website there is writen profitability came from poloniex.

Please help, very good dashboard

Regards.

[michelem]

Hello,

Thanks to Michelm for this dashboard.

I'm new in minera, i have the lastest version istalled 0.9.1
All is working well but i have an error to get "coins_profitability" from redis
error output
"[{\"symbol\":\"ltc\",\"coin\":\"litecoin\",\"algo\":\"scrypt\",\"reward\":25,\"difficulty\":11788933.15348738,\"blocks\":1688088,\"networkhashps\":297860806668585.8,\"btcValue\":0.00697497,\"price\":0.00697497,\"coin_profitability\":0.000042659855963606614,\"btc_profitability\":2.975512155504772e-7,\"timestamp\":1566313142,\"hashrate\":1000000},{\"symbol\":\"btc\",\"coin\":\"bitcoin\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":0,\"blocks\":0,\"networkhashps\":0,\"error\":{\"code\":\"ECONNREFUSED\",\"errno\":\"ECONNREFUSED\",\"syscall\":\"connect\",\"address\":\"144.76.40.144\",\"port\":3332},\"btcValue\":1,\"price\":1,\"coin_profitability\":null,\"btc_profitability\":null,\"timestamp\":1566313142,\"hashrate\":1000000},{\"error\":true,\"message\":\"Blockr data problem\",\"symbol\":\"bch\",\"coin\":\"bitcoin cash\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":0,\"blocks\":0,\"networkhashps\":0,\"coin_profitability\":0,\"btc_profitability\":0,\"timestamp\":1566313142,\"hashrate\":1000000}]"

after a little Ping from 144.76.40.144 this address is come from https://getminera.com/

How can i get coins_profitability working?
In website there is writen profitability came from poloniex.

Please help, very good dashboard

Regards.

Now it should be fixed, from Poloniex I take only the exchange rates, you need to get also blockchain node info to calculate profitability and I use my nodes, that's why the call comes from getminera.com APIs.

[eZ3KIEL29]

Ok,

I have just checked and now i have this error:
when i enable coisn_profitability on system interface i can not load data and when i disable it all is ok on dashboard.

did i miss something?

Output error from web interface : no data available in table
Output from redis-cli get coins_profitability :
"[{\"symbol\":\"btc\",\"coin\":\"bitcoin\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":10183488432890,\"blocks\":591114,\"networkhashps\":72038898416764260000,\"btcValue\":1,\"price\":1,\"coin_profitability\":2.469262834669097e-11,\"btc_profitability\":2.469262834669097e-11,\"timestamp\":1566403322,\"hashrate\":1000000},{\"symbol\":\"ltc\",\"coin\":\"litecoin\",\"algo\":\"scrypt\",\"reward\":12.5,\"difficulty\":11788933.15348738,\"blocks\":1688674,\"networkhashps\":361864248420730.3,\"btcValue\":0.00715448,\"price\":0.00715448,\"coin_profitability\":0.000021329927981803307,\"btc_profitability\":1.5260454314725214e-7,\"timestamp\":1566403322,\"hashrate\":1000000},{\"error\":true,\"message\":\"Blockr data problem\",\"symbol\":\"bch\",\"coin\":\"bitcoin cash\",\"algo\":\"sha256\",\"reward\":12.5,\"difficulty\":0,\"blocks\":0,\"networkhashps\":0,\"coin_profitability\":0,\"btc_profitability\":0,\"timestamp\":1566403322,\"hashrate\":1000000}]"

Thanks.

[morgan_james]

Hello!

i have several problems with minera.

first try
i have built with a raspberry pi 3 b+ with some 2pac gekkoscience usb-sticks.
with the raspberry image everything worked great in the beginning. also the installation of the drivers afterwards.
only the device is always supported between 4 - 12 hours. it was not reachable anymore. the logfile was empty because it started to write again with every new start.

the whole thing has me now after 2 weeks of operation so annoyed that I thought I start the whole thing with another approach

second attempt
i think i'm building the whole thing on a ubuntu server. it also says that you love ubuntu. so i set it up. i installed apache php and all of them next to packages. only after a few minutes of installing and deleting the code lines it breaks off at a cgminer setting. from here on i can't get any further what it is???

started with

Code:

sudo curl -o- https://raw.githubusercontent.com/getminera/minera/master/install_minera_ubuntu.sh | sudo bash

Minera 0.9.1
ubuntu-18.04.3-preinstalled-server-arm64+raspi3

Code:

make[2]: Leaving directory '/var/www/minera/minera-bin/src/cgminer/ccan'
make[2]: Entering directory '/var/www/minera/minera-bin/src/cgminer'
  CC       cgminer-cgminer.o
  CC       cgminer-util.o
  CC       cgminer-sha2.o
  CC       cgminer-api.o
  CC       cgminer-logging.o
  CC       cgminer-klist.o
  CC       cgminer-noncedup.o
  CC       cgminer-fpgautils.o
  CC       cgminer-usbutils.o
  CC       cgminer-libbitfury.o
  CC       cgminer-mcp2210.o
  CC       cgminer-crc16.o
  CC       cgminer-driver-bflsc.o
  CC       cgminer-driver-bitforce.o
  CC       cgminer-driver-hashfast.o
  CC       cgminer-driver-bitfury.o
  CC       cgminer-driver-drillbit.o
  CC       cgminer-driver-icarus.o
  CC       cgminer-driver-klondike.o
  CC       cgminer-driver-avalon2.o
  CC       cgminer-driver-modminer.o
  CCLD     cgminer
/usr/bin/ld: cannot find -lz
collect2: error: ld returned 1 exit status
Makefile:844: recipe for target 'cgminer' failed
make[2]: *** [cgminer] Error 1
make[2]: Leaving directory '/var/www/minera/minera-bin/src/cgminer'
Makefile:1813: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/var/www/minera/minera-bin/src/cgminer'
Makefile:748: recipe for target 'all' failed
make: *** [all] Error 2
DONE! Minera is ready!

Open the URL: http://192.168.1.100/minera/

And happy mining!

Happy Mining? the server is not running either

[michelem]

Hello!

i have several problems with minera.

first try
i have built with a raspberry pi 3 b+ with some 2pac gekkoscience usb-sticks.
with the raspberry image everything worked great in the beginning. also the installation of the drivers afterwards.
only the device is always supported between 4 - 12 hours. it was not reachable anymore. the logfile was empty because it started to write again with every new start.

the whole thing has me now after 2 weeks of operation so annoyed that I thought I start the whole thing with another approach

second attempt
i think i'm building the whole thing on a ubuntu server. it also says that you love ubuntu. so i set it up. i installed apache php and all of them next to packages. only after a few minutes of installing and deleting the code lines it breaks off at a cgminer setting. from here on i can't get any further what it is???

started with

Code:

sudo curl -o- https://raw.githubusercontent.com/getminera/minera/master/install_minera_ubuntu.sh | sudo bash

Minera 0.9.1
ubuntu-18.04.3-preinstalled-server-arm64+raspi3

Code:

make[2]: Leaving directory '/var/www/minera/minera-bin/src/cgminer/ccan'
make[2]: Entering directory '/var/www/minera/minera-bin/src/cgminer'
  CC       cgminer-cgminer.o
  CC       cgminer-util.o
  CC       cgminer-sha2.o
  CC       cgminer-api.o
  CC       cgminer-logging.o
  CC       cgminer-klist.o
  CC       cgminer-noncedup.o
  CC       cgminer-fpgautils.o
  CC       cgminer-usbutils.o
  CC       cgminer-libbitfury.o
  CC       cgminer-mcp2210.o
  CC       cgminer-crc16.o
  CC       cgminer-driver-bflsc.o
  CC       cgminer-driver-bitforce.o
  CC       cgminer-driver-hashfast.o
  CC       cgminer-driver-bitfury.o
  CC       cgminer-driver-drillbit.o
  CC       cgminer-driver-icarus.o
  CC       cgminer-driver-klondike.o
  CC       cgminer-driver-avalon2.o
  CC       cgminer-driver-modminer.o
  CCLD     cgminer
/usr/bin/ld: cannot find -lz
collect2: error: ld returned 1 exit status
Makefile:844: recipe for target 'cgminer' failed
make[2]: *** [cgminer] Error 1
make[2]: Leaving directory '/var/www/minera/minera-bin/src/cgminer'
Makefile:1813: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/var/www/minera/minera-bin/src/cgminer'
Makefile:748: recipe for target 'all' failed
make: *** [all] Error 2
DONE! Minera is ready!

Open the URL: http://192.168.1.100/minera/

And happy mining!

Happy Mining? the server is not running either

Use Ubuntu 16.04

[morgan_james]

Use Ubuntu 16.04

shit ubuntu server 18 IMG File is for Raspberry Pi 3 +2
Ubuntu server 16 IMG for Raspberry Pi 2

[michelem]

Use Ubuntu 16.04

shit ubuntu server 18 IMG File is for Raspberry Pi 3 +2
Ubuntu server 16 IMG for Raspberry Pi 2

There is unofficial Ubuntu 16.04 for RPI 3 https://wiki.ubuntu.com/ARM/RaspberryPi

https://www.finnie.org/software/raspberrypi/ubuntu-rpi3/ubuntu-16.04-preinstalled-server-armhf+raspi3.img.xz

But never tried

[morgan_james]

But never tried

I'll give it a try.

but a minera 1.0 version would be desirable.