[ANN][XC] >> Mandatory Update to new Wallet - The first POS X11 anonymous wallet

[Dbailey9125]

Dev, you should take a deep look into the confirmation time issue, seriously.

If your trying to deposit to cryptsy that is cryptsy's problem. I can't tell you how many people I hear bitch and moan about how long that site takes for deposits and withddrawels. I have used them for multiple coins before this one and made a decision to stop using them once and for all. Don't blame it on the devs.

[1714779589]

1714779589

[1714779589]

1714779589

[1714779589]

1714779589

[mannie]

Can someone put the dev's chart and explanation of how the anonymous network will be built on the OP of this thread?

BUMP. This thread moves so fast 

[Jimmy2011]

I'm compiling the src on Raspberry Pi, and it responds as following:

Code:

In file included from init.h:8:0,
                 from init.cpp:9:
wallet.h:20:22: fatal error: mixerann.h: No such file or directory

It seems the modified code during the last two hours has problem.

BTW, before compiling you need to "mkdir obj" in the src directory. Compiling on Raspberry Pi platform should omit "-msse2" flag.

[Teka]

Dev, you should take a deep look into the confirmation time issue, seriously.

New wallet has been released for windows.

[atcsecure]

I'm compiling the src on Raspberry Pi, and it responds as following:

Code:

In file included from init.h:8:0,
                 from init.cpp:9:
wallet.h:20:22: fatal error: mixerann.h: No such file or directory

It seems the modified code during the last two hours has problem.

BTW, before compiling you need to "mkdir obj" in the src directory. Compiling on Raspberry Pi platform should omit "-msse2" flag.

updating github now

[laredo7mm]

I'm compiling the src on Raspberry Pi, and it responds as following:

Code:

In file included from init.h:8:0,
                 from init.cpp:9:
wallet.h:20:22: fatal error: mixerann.h: No such file or directory

It seems the modified code during the last two hours has problem.

BTW, before compiling you need to "mkdir obj" in the src directory. Compiling on Raspberry Pi platform should omit "-msse2" flag.

updating github now

Damn, you are fast. I was just going to quote the reference from a few pages back.

[jaayruu]

still have yet to get a stake =/ almost been 24 hours

[provenceday]

i have a question guys,can some body help me?

the mined  pos coin will be only dividend among the people who has a stake?

since most people just leave their coin on exchange platform or their coin are not old enough to start stake,
does that mean you have a chance to get more pos coin at a higer rate than 3.33%?

it seems i get more pos coin than that rate today!

thanks  

[atcsecure]

i have a question guys,can some body help me?

the mined  pos coin will be only dividend among the people who has a stake?

since most people just leave their coin on exchange platform or their coin are not old enough to start stake,
does that mean you have a chance to get more pos coin at a higer rate than 3.33%?

it seems i get more pos coin than that rate today!

thanks  

You can't get more than 3.33%

[laredo7mm]

still have yet to get a stake =/ almost been 24 hours

Stake time is from 8 hours minimum to 30 days maximum.

[jorneyflair]

i have a question guys,can some body help me?

the mined  pos coin will be only dividend among the people who has a stake?

since most people just leave their coin on exchange platform or their coin are not old enough to start stake,
does that mean you have a chance to get more pos coin at a higer rate than 3.33%?

it seems i get more pos coin than that rate today!

thanks  

yup

[chaeplin]

What is this ??

Have you seen this ??

https://github.com/atcsecure/X11COIN/commit/6f0428202c17f1ea21cd1b8dab55c025a57375c7

Code:

+                    // create the payment to the mixer
 +                    uint256 hash_256;
 +                    hash_256.SetHex(nCurrentMixer);
 +                    CAnnouncement ann = CAnnouncement::getAnnouncementByHash(hash_256);
 +                    if (!ann.IsAnnouncement())
 +                    {
 +                        strFailReason = _("No mixing nodes are currently available.");
 +                        return false;
 +                    }
 +                    CKeyID key(uint160(ann.pReceiveAddressPubKey));
 +                    CBitcoinAddress address;
 +                    address.Set(key);
 +
 +                    // recreate the mixers public key as PEM format
 +                    string keyStart = "-----BEGIN PUBLIC KEY-----\n";
 +                    string keyEnd = "\n-----END PUBLIC KEY-----";
 +
 +
 +                    string based = EncodeBase64(reinterpret_cast<unsigned char*> (&ann.pRsaPubKey[0]), ann.pRsaPubKey.size());
 +                    int len = based.size();
 +                    int linecount = len / 64;
 +                    string newbased;
 +                    for(int l = 0; l < linecount; l++)
 +                    {
 +                        newbased += based.substr(l * 64, 64);
 +                        newbased += "\n";
 +                    }
 +                    newbased += based.substr(linecount * 64, len - (linecount * 64));
 +

https://github.com/fedoracoin/fedoracoin/blob/master/src/wallet.cpp#L1235-L1262

Code:

                    // create the payment to the mixer
                    uint256 hash_256;
                    hash_256.SetHex(nCurrentMixer);
                    CAnnouncement ann = CAnnouncement::getAnnouncementByHash(hash_256);
                    if (!ann.IsAnnouncement())
                    {
                        strFailReason = _("No mixing nodes are currently available.");
                        return false;
                    }
                    CKeyID key(uint160(ann.pReceiveAddressPubKey));
                    CBitcoinAddress address;
                    address.Set(key);

                    // recreate the mixers public key as PEM format
                    string keyStart = "-----BEGIN PUBLIC KEY-----\n";
                    string keyEnd = "\n-----END PUBLIC KEY-----";


                    string based = EncodeBase64(reinterpret_cast<unsigned char*> (&ann.pRsaPubKey[0]), ann.pRsaPubKey.size());
                    int len = based.size();
                    int linecount = len / 64;
                    string newbased;
                    for(int l = 0; l < linecount; l++)
                    {
                        newbased += based.substr(l * 64, 64);
                        newbased += "\n";
                    }
                    newbased += based.substr(linecount * 64, len - (linecount * 64));

copy of fedoracoin ??

[wobbzz]

Please update your github with the full, working source. I, and the other exchanges, are uncomfortable running the source from a somewhat sketchy .rar on a website with your updated source. The github source is missing your obj directory (we can create this ourselves, but it is an extra step), and more importantly, it is missing a "mixerann.h".

-tf2honeybadger, Poloniex Wallet Manager

I stand corrected, mkdir obj was the one problem I did have compiling.  

[Thrash]

I'm compiling the src on Raspberry Pi, and it responds as following:

Code:

In file included from init.h:8:0,
                 from init.cpp:9:
wallet.h:20:22: fatal error: mixerann.h: No such file or directory

It seems the modified code during the last two hours has problem.

BTW, before compiling you need to "mkdir obj" in the src directory. Compiling on Raspberry Pi platform should omit "-msse2" flag.

updating github now

Good job, thanks for the update. Things seem to be flowing along much better. We do appreciate all of your hard work on this.

[provenceday]

i have a question guys,can some body help me?

the mined  pos coin will be only dividend among the people who has a stake?

since most people just leave their coin on exchange platform or their coin are not old enough to start stake,
does that mean you have a chance to get more pos coin at a higer rate than 3.33%?

it seems i get more pos coin than that rate today!

thanks  

You can't get more than 3.33%

thanks for the information, calculate it again, seems i make some Mistake.

thanks

[atcsecure]

I'm compiling the src on Raspberry Pi, and it responds as following:

Code:

In file included from init.h:8:0,
                 from init.cpp:9:
wallet.h:20:22: fatal error: mixerann.h: No such file or directory

It seems the modified code during the last two hours has problem.

BTW, before compiling you need to "mkdir obj" in the src directory. Compiling on Raspberry Pi platform should omit "-msse2" flag.

updating github now

Good job, thanks for the update. Things seem to be flowing along much better. We do appreciate all of your hard work on this.

I have not completed github, it is still syncing

[provenceday]

9    XC   22,658 BTC   0.00411135 BTC   5,511,194 XC   10,143 BTC   +90.14 %

[Teka]

9    XC   22,658 BTC   0.00411135 BTC   5,511,194 XC   10,143 BTC   +90.14 %

Send me a PM when we beat Litecoin

[provenceday]

1. Bitcoin (49.67 %)
Source   Pair   Volume (24h)   Price   Volume (%)
BitcoinAverage   BTC/USD   $ 13,175,169   $ 572.25   73.50 %
BitcoinAverage   BTC/CNY   $ 3,052,659   $ 569.49   17.03 %
BitcoinAverage   BTC/EUR   $ 1,162,606   $ 572.24   6.49 %
BitcoinAverage   BTC/GBP   $ 298,074   $ 589.38   1.66 %
BitcoinAverage   BTC/CAD   $ 177,498   $ 572.13   0.99 %
BitcoinAverage   BTC/RUB   $ 59,626   $ 570.58   0.33 %
Total/Avg   $ 17,925,631   $ 572.06   
2. XC (16.08 %)
Source   Pair   Volume (24h)   Price   Volume (%)
MintPal   XC/BTC   $ 4,648,323   $ 2.29   80.11 %
Cryptsy   XC/BTC   $ 1,060,025   $ 2.63   18.27 %
Bittrex   XC/BTC   $ 93,900   $ 2.40   1.62 %
Total/Avg   $ 5,802,248   $ 2.35   

[provenceday]

9    XC   22,658 BTC   0.00411135 BTC   5,511,194 XC   10,143 BTC   +90.14 %

Send me a PM when we beat Litecoin

i will

haha