Open Source XPM Pool + GPU Miner (aka. madPrimeMiner)

[LongAndShort]

i have tried this miner but i cannot get it to work.

with the default config.txt it runs but cannot connect to the pool.

if i add another pool in the config and do not change anything, after starting the client, it will close after 2-3 seconds

can anyone please give me some help with it?

Send eXtremal a pm he has a pool and will set you up im pretty sure if you just pm him and if you get no luck with him (if he thinks his pool is too full) then pm me and ill hook you up on mine

[1715057811]

1715057811

[1715057811]

1715057811

[1715057811]

1715057811

[eXtremal]

https://www.dropbox.com/s/fgok9qjj7ralf04/patch_v3.tar.gz

3xRadeon R9 290X (second - 1040Mhz engine), primorial 13 (its better)
[GPU 0] T=-1C A=-1% E=0 primes=0.102150 fermat=699037/sec cpd=7.47/day
[GPU 1] T=-1C A=-1% E=0 primes=0.102177 fermat=729920/sec cpd=7.82/day
[GPU 2] T=-1C A=-1% E=0 primes=0.102233 fermat=702758/sec cpd=7.57/day

5xRadeon R9 290, primorial 12
[GPU 0] T=-1C A=-1% E=0 primes=0.104095 fermat=515590/sec cpd=6.65/day
[GPU 1] T=-1C A=-1% E=0 primes=0.104180 fermat=513306/sec cpd=6.68/day
[GPU 2] T=-1C A=-1% E=0 primes=0.103999 fermat=515606/sec cpd=6.59/day
[GPU 3] T=-1C A=-1% E=0 primes=0.104128 fermat=501082/sec cpd=6.49/day
[GPU 4] T=-1C A=-1% E=0 primes=0.103949 fermat=513965/sec cpd=6.54/day

About 7,8 CPD with Radeon R9 290X.

[madMAx510510]

NEWS: I've finished the solo-mining server.

The solo-mining server code is at: https://github.com/madMAx43v3r/xpmserver

The solo-mining server binaries can be downloaded at:
For Windows: https://mega.co.nz/#!hRAmGRAQ!cbYlm-meXprzImw-vQ5COnBQiWtgPFXJeJtTs-041AI
For Linux: https://mega.co.nz/#!NZAHWC6b!FyeF6aKZ32KPs_Ns0NwZsEGaOWkNAlwfSz76hO-Dg_k
Note: The windows version crashes on shutdown, have not been able to fix this.

The binary zips also include a README.txt you should check out to get started.

EDIT: If you have dynamic ip: There is a bug somewhere in the bitcoin network code that can cause the server to loose all connections to the network after your external ip has changed. It will still show 8 or more connections but if you look in debug.log you will no longer see new blocks or transactions. In this case you need to restart the server.
The chance of this bug to happen is around 50%. So be careful, if your external ip changes and you don't check the server and the bug has happend you will produce 100% orphan blocks.

[eXtremal]

NEWS: I've finished the solo-mining server.

Good But it can't work with standard primecoin client from official site.

Next (experimental) patch https://www.dropbox.com/s/q9kzdvpl0rx8rf3/patch_v4.tar.gz

[GPU 0] T=-1C A=-1% E=0 primes=0.102244 fermat=710117/sec cpd=7.66/day
[GPU 1] T=-1C A=-1% E=0 primes=0.102266 fermat=741074/sec cpd=8.01/day
[GPU 2] T=-1C A=-1% E=0 primes=0.102105 fermat=702950/sec cpd=7.48/day

[madMAx510510]

NEWS: I've finished the solo-mining server.

Good But it can't work with standard primecoin client from official site.

Why? I've tested and it works.

Next (experimental) patch https://www.dropbox.com/s/q9kzdvpl0rx8rf3/patch_v4.tar.gz

[GPU 0] T=-1C A=-1% E=0 primes=0.102244 fermat=710117/sec cpd=7.66/day
[GPU 1] T=-1C A=-1% E=0 primes=0.102266 fermat=741074/sec cpd=8.01/day
[GPU 2] T=-1C A=-1% E=0 primes=0.102105 fermat=702950/sec cpd=7.48/day

Nice job

[ivanlabrie]

Amazing news!

[primer10]

nice job!

Thank you eXtremal and madMax!

@eXtremal, you mentioned that you would need to patch client code? Not released yet?

@madMax, same link for Windows and Linux? Both of them are Windows.

Anyone encounter error forking madMax's github code if you already have primecoin or ppcoin forked into your repo?

[madMAx510510]

Link for linux version fixed, thanks for reporting.

Linux xpmserver: https://mega.co.nz/#!NZAHWC6b!FyeF6aKZ32KPs_Ns0NwZsEGaOWkNAlwfSz76hO-Dg_k

EDIT: Guys please, targeting 11-chains is only more profitable when diff >10.99 at least (sunny king ain't stupid and my calcs show this also)
Currently the miner does not support uneven targets (resulting in wrong CPD readings) because i didn't expect anyone to go for 11 anytime soon.
However supercomputing is testing a fix right now, so we'll see.

[AVG22]

2 MadMax
the solo-mining server
At what address wallet coins will come in the case of finding the block.
What percentage of a developer?

[eXtremal]

Why? I've tested and it works.

I don't understand how I can mine with official wallet (http://primecoin.io/downloads.php).. it's possible only with patched wallet from github.

How much CPD on R9 280X with last version? Quote from Claymore miner's thread:

Some problems with v10. With i5 CPU and 3 280x everything works fine, I get 16 CPD. But with AMD Sempron single core processor and 3 280x very few share only found. It estimates 15 CPD but reality is more like 1.5 with 10.0v. Same rig estimates and averages 14 CPD with 9.1, so I switched back to 9.1v.

Claymore 10.0 miner shows 5,33CPD for one R9 280X.

EDIT: Guys please, targeting 11-chains is only more profitable when diff >10.99 at least (sunny king ain't stupid and my calcs show this also)
Currently the miner does not support uneven targets (resulting in wrong CPD readings) because i didn't expect anyone to go for 11 anytime soon.
However supercomputing is testing a fix right now, so we'll see.

I have a true 11ch version with 0,27CPD on R9 290X, it's unusable with current diffuculty, let's wait 10.99 (may be 10.98x).

[primer10]

Why? I've tested and it works.

I don't understand how I can mine with official wallet (http://primecoin.io/downloads.php).. it's possible only with patched wallet from github.

You can't. madMax patched official wallet as he is reusing his protobuf/czmq/zmq/utf8 code from pool server, integrating into the wallet to simplify the coding.

2 MadMax
the solo-mining server
At what address wallet coins will come in the case of finding the block.
What percentage of a developer?

no dev fee inside. The patched wallet probably can use the blockchain and keys on the same system where you installed the official wallet. Else, it will be a new address

[madMAx510510]

2 MadMax
the solo-mining server
At what address wallet coins will come in the case of finding the block.
What percentage of a developer?

no dev fee inside. The patched wallet probably can use the blockchain and keys on the same system where you installed the official wallet. Else, it will be a new address

Yeah, it's a new address for each block, just like the original code.
And yes, there is no dev fee.

[primer10]

2 MadMax
the solo-mining server
At what address wallet coins will come in the case of finding the block.
What percentage of a developer?

no dev fee inside. The patched wallet probably can use the blockchain and keys on the same system where you installed the official wallet. Else, it will be a new address

Yeah, it's a new address for each block, just like the original code.
And yes, there is no dev fee.

but users are most welcome to donate to madmax for his hardwork  , not forgetting eXtremal too

[xolokram]

hi everybody,

I just wanted to let you know, that I integrated madmax' source code & extremal's v3 optimizations into my primecoin pool miner, "xolominer", which can be used to mine on www.beeeeer.org
The official announcement can be found here: ppc/xpm-talk ANN thread

I integrated a developer fee (1%) pointing at madmax' donation address.
Also, it's experimental and not 100% perfect yet (missing some comfort features and cleanup).

Well, uhm... thank you so far.

- xolokram

ps. I'll try this monitor this thread here, but I'm more active on the ppc/xpm-talk board

[kev7112001]

hi everybody,

I just wanted to let you know, that I integrated madmax' source code & extremal's v3 optimizations into my primecoin pool miner, "xolominer", which can be used to mine on www.beeeeer.org
The official announcement can be found here: ppc/xpm-talk ANN thread

I integrated a developer fee (1%) pointing at madmax' donation address.
Also, it's experimental and not 100% perfect yet (missing some comfort features and cleanup).

Well, uhm... thank you so far.

- xolokram

ps. I'll try this monitor this thread here, but I'm more active on the ppc/xpm-talk board

nice and works on 69xx series wish there was a solo ver too

[hashfun]

Hello,

Anyone tested on old GPU like HD-5970?

[LongAndShort]

hi everybody,

I just wanted to let you know, that I integrated madmax' source code & extremal's v3 optimizations into my primecoin pool miner, "xolominer", which can be used to mine on www.beeeeer.org
The official announcement can be found here: ppc/xpm-talk ANN thread

I integrated a developer fee (1%) pointing at madmax' donation address.
Also, it's experimental and not 100% perfect yet (missing some comfort features and cleanup).

Well, uhm... thank you so far.

- xolokram

ps. I'll try this monitor this thread here, but I'm more active on the ppc/xpm-talk board

nice and works on 69xx series wish there was a solo ver too

Errrm have you read this lately

Maybe you know me from my other thread where i launched a new XPM pool + GPU miner:
https://bitcointalk.org/index.php?topic=598542.0

If yes, you also know that it failed because of DOS attacks and other general server problems.

I've now decided to go open source, with the pool server and the GPU miner.
Now everyone with the expertise can create an XPM pool and also create new miners that work with the same protocol.
Also anyone with basic bitcoin code knowledge can make a solo-miner out of it. EDIT: It's now available.

The pool server code is located at: https://github.com/madMAx43v3r/xpmpool
And the GPU miner code is at: https://github.com/madMAx43v3r/xpmclient
UPDATE: The solo-mining server code is at: https://github.com/madMAx43v3r/xpmserver

The solo-mining server binaries can be downloaded at:
For Windows: https://mega.co.nz/#!hRAmGRAQ!cbYlm-meXprzImw-vQ5COnBQiWtgPFXJeJtTs-041AI
For Linux: https://mega.co.nz/#!NZAHWC6b!FyeF6aKZ32KPs_Ns0NwZsEGaOWkNAlwfSz76hO-Dg_k
Note: The windows version crashes on shutdown, have not been able to fix this.

EDIT: If you have dynamic ip: There is a bug somewhere in the bitcoin network code that can cause the server to loose all connections to the network after your external ip has changed. It will still show 8 or more connections but if you look in debug.log you will no longer see new blocks or transactions. In this case you need to restart the server.
The chance of this bug to happen is around 50%. So be careful, if your external ip changes and you don't check the server and the bug has happend you will produce 100% orphan blocks.

Please use this thread to discuss and/or ask questions about the code.

If you like my work you can donate XPM to:
ATHHPkcWjhUSqXpgJhTut7jzWo3JEbNj9J

Maybe i'm misunderstanding what it is you want!?

[kev7112001]

hi everybody,

I just wanted to let you know, that I integrated madmax' source code & extremal's v3 optimizations into my primecoin pool miner, "xolominer", which can be used to mine on www.beeeeer.org
The official announcement can be found here: ppc/xpm-talk ANN thread

I integrated a developer fee (1%) pointing at madmax' donation address.
Also, it's experimental and not 100% perfect yet (missing some comfort features and cleanup).

Well, uhm... thank you so far.

- xolokram

ps. I'll try this monitor this thread here, but I'm more active on the ppc/xpm-talk board

nice and works on 69xx series wish there was a solo ver too

Errrm have you read this lately

Maybe you know me from my other thread where i launched a new XPM pool + GPU miner:
https://bitcointalk.org/index.php?topic=598542.0

If yes, you also know that it failed because of DOS attacks and other general server problems.

I've now decided to go open source, with the pool server and the GPU miner.
Now everyone with the expertise can create an XPM pool and also create new miners that work with the same protocol.
Also anyone with basic bitcoin code knowledge can make a solo-miner out of it. EDIT: It's now available.

The pool server code is located at: https://github.com/madMAx43v3r/xpmpool
And the GPU miner code is at: https://github.com/madMAx43v3r/xpmclient
UPDATE: The solo-mining server code is at: https://github.com/madMAx43v3r/xpmserver

The solo-mining server binaries can be downloaded at:
For Windows: https://mega.co.nz/#!hRAmGRAQ!cbYlm-meXprzImw-vQ5COnBQiWtgPFXJeJtTs-041AI
For Linux: https://mega.co.nz/#!NZAHWC6b!FyeF6aKZ32KPs_Ns0NwZsEGaOWkNAlwfSz76hO-Dg_k
Note: The windows version crashes on shutdown, have not been able to fix this.

EDIT: If you have dynamic ip: There is a bug somewhere in the bitcoin network code that can cause the server to loose all connections to the network after your external ip has changed. It will still show 8 or more connections but if you look in debug.log you will no longer see new blocks or transactions. In this case you need to restart the server.
The chance of this bug to happen is around 50%. So be careful, if your external ip changes and you don't check the server and the bug has happend you will produce 100% orphan blocks.

Please use this thread to discuss and/or ask questions about the code.

If you like my work you can donate XPM to:
ATHHPkcWjhUSqXpgJhTut7jzWo3JEbNj9J

Maybe i'm misunderstanding what it is you want!?

said it clearly a solo ver that works with 69xx series

[kev7112001]

Hello,

Anyone tested on old GPU like HD-5970?

try it out works on 6970/50

[primer10]

hi everybody,

I just wanted to let you know, that I integrated madmax' source code & extremal's v3 optimizations into my primecoin pool miner, "xolominer", which can be used to mine on www.beeeeer.org
The official announcement can be found here: ppc/xpm-talk ANN thread

I integrated a developer fee (1%) pointing at madmax' donation address.
Also, it's experimental and not 100% perfect yet (missing some comfort features and cleanup).

Well, uhm... thank you so far.

- xolokram

ps. I'll try this monitor this thread here, but I'm more active on the ppc/xpm-talk board

+1