a123
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 09:25:01 PM |
|
For the 100th time, THERE IS A BLOCK PROPAGATION ISSUE WITH THE WALLET! IT GOES OUT OF SYNC EVERY COUPLE OF HOURS.
At this very moment i have 15 wallets open (same wallet.dat file, compiled using latest code from github) 1 hour ago i burned 200 slims. Only 3 wallets out of 15 showed the updated balance. It took the other 12 wallets 24 minutes to show updated balance.
While troubleshooting the issue, i tried sending 1slm from one of the stuck wallets. As soon as I broadcasted the transaction it started syncing. This explains why sandors pool wallet has no sync issues, it has a constant flux of incoming and outgoing transactions.
Good discovery. I have been getting an orphan rate of around 20% for PoW which has been rather annoying. I'll have a script monitor the pools and send SLMs around once my block gets stuck; will update if this works.
|
|
|
|
d5000
Legendary
Offline
Activity: 4018
Merit: 7129
Decentralization Maximalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 03:34:06 AM |
|
I have a problem installing the Linux executable from Github. When I download slimcoin-linux.tar.gz, untar it and try to start it I get the following error: -bash: ./slimcoind: cannot execute binary file: Exec format error I tried it on two different machines (home PC and VPS), same problem. What am I doing wrong, or is this a bug? (PS: Please, rename the sli cmoin-executable directory. It looks terrible.)
|
|
|
|
slimcoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 04:28:08 AM |
|
The linux binaries are not perfect yet. I am working on getting statically linked 32 and 64 bit binaries. Currently, they are dynamically linked for 64 bit. It is best for you to just download all of the libraries and compile it yourself. Compiling on linux is not hard at all, look at build-unix.txt in the doc/ directory.
|
-Much Donate BTC-1D5pnma7E1CP6cquHujycVy79EyXJ3eY
|
|
|
idad01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 05:27:02 AM |
|
Why is there a lot of invalid block, I deleted all files except the wallet.dat and began re-start synchronization!
|
|
|
|
jadefalke
Legendary
Offline
Activity: 1456
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:08:57 AM |
|
hi,
when i went to bed Yesterday everything with my Client was ok, now he rolled back a lot of Transactions and they are unconfirmed. Unconfirmed Transaction start 11.07.2014 around 2:51 GMT+1. Does anybody else had such a Problem? How can i Fix that? Could it be possible that we have a Fork issue again, or is it only my Client out of sync?
|
|
|
|
jadefalke
Legendary
Offline
Activity: 1456
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:10:50 AM |
|
a second node has the same Problem and is also on a Fork. looks like it's a Problem in general.
|
|
|
|
d5000
Legendary
Offline
Activity: 4018
Merit: 7129
Decentralization Maximalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:19:08 AM |
|
The linux binaries are not perfect yet. I am working on getting statically linked 32 and 64 bit binaries. Currently, they are dynamically linked for 64 bit. It is best for you to just download all of the libraries and compile it yourself. Compiling on linux is not hard at all, look at build-unix.txt in the doc/ directory.
Thanks. I tried to compile slimcoind now (using the latest code on git), but compiler (g++ 4.8.2) gets stuck (simply stops to compile) after the following lines: main.cpp:994:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] int64 nRewardCoinYear = nTime > POB_POS_TARGET_SWITCH_TIME ? (10 * CENT) : CENT; // creation amount per coin-year ^ main.cpp:1030:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || nTime > POB_POS_TARGET_SWITCH_TIME) ^ main.cpp:1125:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || pindexLast->nTime > POB_POS_TARGET_SWITCH_TIME) ^ main.cpp:2380:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || GetBlockTime() > CHAINCHECKS_SWITCH_TIME)
Unfortunately there is no version marked as "stable" which I could try.
|
|
|
|
ynyjl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:34:03 AM |
|
Fork blockchain:
long: getblockhash 35586 000000006012e412c9009be384d2a5686a06949e5b36d1c4b909b955c2fd0033 getblockhash 35587 07450307a456afcbc62d8414913a8b4497f4dc13629337b7db5658aa52877155
short: getblockhash 35586 000000006012e412c9009be384d2a5686a06949e5b36d1c4b909b955c2fd0033 getblockhash 35587 fc673b277c18d9c7f456610f4ef2f3d93b75ee1028da982b6e373d91b234231c
|
|
|
|
slimcoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:35:17 AM |
|
That fork will be fixed through the syncronized checkpoints
|
-Much Donate BTC-1D5pnma7E1CP6cquHujycVy79EyXJ3eY
|
|
|
slimcoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:37:11 AM |
|
The linux binaries are not perfect yet. I am working on getting statically linked 32 and 64 bit binaries. Currently, they are dynamically linked for 64 bit. It is best for you to just download all of the libraries and compile it yourself. Compiling on linux is not hard at all, look at build-unix.txt in the doc/ directory.
Thanks. I tried to compile slimcoind now (using the latest code on git), but compiler (g++ 4.8.2) gets stuck (simply stops to compile) after the following lines: main.cpp:994:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] int64 nRewardCoinYear = nTime > POB_POS_TARGET_SWITCH_TIME ? (10 * CENT) : CENT; // creation amount per coin-year ^ main.cpp:1030:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || nTime > POB_POS_TARGET_SWITCH_TIME) ^ main.cpp:1125:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || pindexLast->nTime > POB_POS_TARGET_SWITCH_TIME) ^ main.cpp:2380:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if(fTestNet || GetBlockTime() > CHAINCHECKS_SWITCH_TIME)
Unfortunately there is no version marked as "stable" which I could try. Thanks for pointing this out. I will add the folowing change when I next update the client. Try editing main.h. Search for the lines where CHAINCHECKS_SWITCH_TIME and POB_POS_TARGET_SWITCH_TIME are defined. The number they correspond to, add a ULL to the end, no space, ex: 2403654400ULL Save and recompile. Tell me if that works.
|
-Much Donate BTC-1D5pnma7E1CP6cquHujycVy79EyXJ3eY
|
|
|
idad01
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:29:06 AM |
|
current number of block 35825? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ?
|
|
|
|
ynyjl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:39:08 AM |
|
current number of block 35825? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? It's short blockchain.
|
|
|
|
slimcoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:39:54 AM |
|
I am currently working on getting the blockchain where it was before.
|
-Much Donate BTC-1D5pnma7E1CP6cquHujycVy79EyXJ3eY
|
|
|
jadefalke
Legendary
Offline
Activity: 1456
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:57:34 AM |
|
appreciate that, looks totaly wired atm.
|
|
|
|
slimcoin (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:05:25 AM |
|
If you are back at block 35587 or so, there was a fork in the blockchain. The upcoming update will have the hard checkpoints for that fork. You can get back on the correct blockchain by: deleting blkindex.dat, blk0001.dat, and the addr.dat and starting the slimcoin client with the following flags: "-maxconnections=1 -connect=76.127.202.17"
To see if you are on the correct fork, the rpc command "getblockhash 35587" should return 0x07450307a456afcbc62d8414913a8b4497f4dc13629337b7db5658aa52877155
|
-Much Donate BTC-1D5pnma7E1CP6cquHujycVy79EyXJ3eY
|
|
|
rfcdejong
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:55:09 AM |
|
If you are back at block 35587 or so, there was a fork in the blockchain. The upcoming update will have the hard checkpoints for that fork. You can get back on the correct blockchain by: deleting blkindex.dat, blk0001.dat, and the addr.dat and starting the slimcoin client with the following flags: "-maxconnections=1 -connect=76.127.202.17"
To see if you are on the correct fork, the rpc command "getblockhash 35587" should return 0x07450307a456afcbc62d8414913a8b4497f4dc13629337b7db5658aa52877155
wow, all my 3 wallets on the wrong fork..
|
|
|
|
primer-
Legendary
Offline
Activity: 1092
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 11:14:57 AM |
|
The fork happened because of the BLOCK PROPAGATION ISSUE i pointed at many many times.
Fucking developer is a retard. I will not be wasting my time with this shitcoin any more.
|
|
|
|
AizenSou
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 11:23:07 AM |
|
The fork happened because of the BLOCK PROPAGATION ISSUE i pointed at many many times.
Fucking developer is a retard. I will not be wasting my time with this shitcoin any more.
How many shitcoins did you kill btw, primer- ? You with your CPU farm instamined almost every new coin and dumped it on the market, then you insult everyone who makes you bank ?
|
|
|
|
d5000
Legendary
Offline
Activity: 4018
Merit: 7129
Decentralization Maximalist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 11:24:57 AM Last edit: July 20, 2014, 12:17:29 PM by d5000 |
|
Thanks for pointing this out. I will add the folowing change when I next update the client. Try editing main.h. Search for the lines where CHAINCHECKS_SWITCH_TIME and POB_POS_TARGET_SWITCH_TIME are defined. The number they correspond to, add a ULL to the end, no space, ex: 2403654400ULL
Save and recompile.
Tell me if that works.
Had no luck. The warnings are gone when I add ULL to the numbers, but compiler stucks and crashes when compiling main.cpp. PS: The crash seems to be a RAM issue, so slimcoin has nothing to do with it. Sorry. PS2: Got it to work now.
|
|
|
|
primer-
Legendary
Offline
Activity: 1092
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 11:25:45 AM |
|
The fork happened because of the BLOCK PROPAGATION ISSUE i pointed at many many times.
Fucking developer is a retard. I will not be wasting my time with this shitcoin any more.
How many shitcoins did you kill btw, primer- ? You with your CPU farm instamined almost every new coin and dumped it on the market, then you insult everyone who makes you bank ? I tried to point the dev in the right direction but he is just too stupid. He posted yesterday he was workiing on a FAQ instead of addressing serious issues with the coin. What an idiot. If you have a block propagation issue it will most definitely lead to a fork. crypto 1-0-1.
|
|
|
|
|