[ANN][SUPERCOIN]First P2p Decentralized Trustless Anonymous Wallet Coming Soon

[supercointeam]

We are on  126334 block chain, if you are on 127k then you need to sync from scratch using the nodes given in the OP.

im on block 125475 and synced

I'm on a fork too?

(using mac client 1.3)

use the nodes from op re sync please from scratch it looks to me you stuck

i just successfully send a few coins to bittrex.

client is syncing again says there's 128135 total blocks

You need to resync from scratch make sure to use nodes in OP.

[jorrr]

what a mess everyone is on different forks is bittrex on the right one?

[davisgreen]

My wallet is been running since last few days.
All normal. Synced..checked..its on correct block. And minting its way away.
While there's been so much mess around.

[dminer69]

bittrex is fine just got some coins out.

[smashyd]

wallet synced at last. 126627

[ponch85]

bittrex is fine just got some coins out.

+1

[sovie]

so which wallet version should i be using on windows?

[smashyd]

so which wallet version should i be using on windows?

ver 2.1.1

[toaster3]

so which wallet version should i be using on windows?

1.4 or 2.1, and use those addnodes in OP

[toaster3]

so which wallet version should i be using on windows?

ver 2.1.1

dev removed 2.1.1 so use version 2.1, which is the latest. And use those addnodes from OP. Or addnodes from here (which may be more recent):
https://bitcointalk.org/index.php?topic=618552.msg7583047#msg7583047

[smashyd]

so which wallet version should i be using on windows?

ver 2.1.1

dev removed 2.1.1 so use version 2.1, which is the latest. And use those addnodes from OP. Or addnodes from here (which may be more recent):
https://bitcointalk.org/index.php?topic=618552.msg7583047#msg7583047

Thats interesting, I didn't realise 2.1.1 had been removed. Is it ok to use? I have set it up now and it seems to work

[sovie]

thanks
was just about to say no v2.1.1 only 2.1.0
which i have already but i am still on the wrong fork
i hope i don't lose any super  

[sovie]

thanks
was just about to say no v2.1.1 only 2.1.0
which i have already but i am still on the wrong fork
i hope i don't lose any super  

looks like i may have lost the last lot of super sent to bittrex as i was on the wrong fork 

DEV YOU NEED TO MAKE CLEAR WHAT IS GOING ON AS I WON'T BE THE ONLY ONE TO LOSE COINS
LIKE THIS!

[jorrr]

I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again?

This is getting strange 

[supercoindev]

I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again?

This is getting strange  

Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one.

While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things:

(1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below.

(2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here:
https://mega.co.nz/#!txoTQTBB!S6AbRWkyXCMrdDv7jWv3HiyjgJY3oCSkMUmGhvwx4JY

Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file).

Using addnodes from OP, and open qt again (make sure you use V1.4 or 2.1 (V1.3 or 2.0 OK too)), you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine.

BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync.

[toaster3]

I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again?

This is getting strange 

Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one.

While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things:

(1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below.

(2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here:
https://mega.co.nz/#!txoTQTBB!S6AbRWkyXCMrdDv7jWv3HiyjgJY3oCSkMUmGhvwx4JY

Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file).

Using addnodes from OP, and open qt again (make sure you use V1.4 or 2.1 (V1.3 or 2.0 OK too)), you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine.

BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync.

good

[Rnbin]

I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again?

This is getting strange  

Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one.

While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things:

(1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below.

(2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here:
******

Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file).

Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine.

BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync.

supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy

[toaster3]

I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again?

This is getting strange  

Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one.

While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things:

(1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below.

(2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here:
******

Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file).

Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine.

BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync.

supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy

Please check his post history. All the dev related plan/details about anon etc posted by him

[counter]

Boy it sure has been a interesting few days, lots of ups and down with the price.  I wish I had not sold my coins early with the first initial pump fake.  I could have had made a decent bit of Supercoins had I held and played the dips of the recent news. 

[Perl++]

supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy

anyway it's only a blockchain file