sovie
|
|
June 29, 2014, 06:50:18 PM |
|
so which wallet version should i be using on windows?
|
|
|
|
smashyd
Member
Offline
Activity: 66
Merit: 10
|
|
June 29, 2014, 06:51:23 PM |
|
so which wallet version should i be using on windows?
ver 2.1.1
|
|
|
|
toaster3
|
|
June 29, 2014, 06:51:42 PM |
|
so which wallet version should i be using on windows?
1.4 or 2.1, and use those addnodes in OP
|
|
|
|
|
smashyd
Member
Offline
Activity: 66
Merit: 10
|
|
June 29, 2014, 06:57:22 PM |
|
Thats interesting, I didn't realise 2.1.1 had been removed. Is it ok to use? I have set it up now and it seems to work
|
|
|
|
sovie
|
|
June 29, 2014, 06:58:05 PM |
|
thanks was just about to say no v2.1.1 only 2.1.0 which i have already but i am still on the wrong fork i hope i don't lose any super
|
|
|
|
sovie
|
|
June 29, 2014, 07:03:10 PM |
|
thanks was just about to say no v2.1.1 only 2.1.0 which i have already but i am still on the wrong fork i hope i don't lose any super looks like i may have lost the last lot of super sent to bittrex as i was on the wrong fork DEV YOU NEED TO MAKE CLEAR WHAT IS GOING ON AS I WON'T BE THE ONLY ONE TO LOSE COINS LIKE THIS!
|
|
|
|
jorrr
|
|
June 29, 2014, 07:06:07 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange
|
|
|
|
supercoindev
Member
Offline
Activity: 213
Merit: 10
|
|
June 29, 2014, 07:22:53 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: https://mega.co.nz/#!txoTQTBB!S6AbRWkyXCMrdDv7jWv3HiyjgJY3oCSkMUmGhvwx4JYNote this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again ( make sure you use V1.4 or 2.1 (V1.3 or 2.0 OK too)), you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync.
|
|
|
|
toaster3
|
|
June 29, 2014, 07:29:21 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: https://mega.co.nz/#!txoTQTBB!S6AbRWkyXCMrdDv7jWv3HiyjgJY3oCSkMUmGhvwx4JYNote this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again ( make sure you use V1.4 or 2.1 (V1.3 or 2.0 OK too)), you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync. good
|
|
|
|
Rnbin
|
|
June 29, 2014, 07:32:52 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: ****** Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync. supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy
|
|
|
|
toaster3
|
|
June 29, 2014, 07:39:14 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: ****** Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync. supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy Please check his post history. All the dev related plan/details about anon etc posted by him
|
|
|
|
counter
|
|
June 29, 2014, 07:47:40 PM |
|
Boy it sure has been a interesting few days, lots of ups and down with the price. I wish I had not sold my coins early with the first initial pump fake. I could have had made a decent bit of Supercoins had I held and played the dips of the recent news.
|
|
|
|
Perl++
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 29, 2014, 07:47:43 PM |
|
supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy
anyway it's only a blockchain file
|
|
|
|
supercoindev
Member
Offline
Activity: 213
Merit: 10
|
|
June 29, 2014, 07:56:06 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: ****** Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync. supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy Yes this is supercoin dev account. Supercointeam is sleeping now. He will confirm if you want to wait in 7-8 hours. Check my post history for details if you have a doubt. https://bitcointalk.org/index.php?action=profile;u=341100;sa=showPosts
|
|
|
|
sovie
|
|
June 29, 2014, 07:56:12 PM |
|
i've just rrsynced the whole chain and started from scratch and i'm back to 128505??
i will try downloading the block chain from your link
i'm using the nodes from the op so what could i possibly be doing wrong here?
|
|
|
|
supercointeam (OP)
|
|
June 29, 2014, 07:59:31 PM |
|
I was on 126692 synced up and ready, but suddenly i got the message downloading 1600 blocks and out of sync to 128135 again? This is getting strange Yes the 126692 is the correct chain (now is 126730). 128135 is the wrong one. While we are working on adding new checkpoints that will make sure you are on the right chain, if you sync'ed to the wrong chain, you can do one of the 2 things: (1). Sync from scratch, and use the addnodes from OP. In most case, this should bring you to the right blockchain. In some cases, this may not work. try (2) below. (2). If you don't want to sync from scratch (it takes time to sync), you can download the blockchain here: ****** Note this is a big file (about 90M). Exit your qt, unzip the file you downloaded, and copy database and txleveldb dir, and blk001.dat file to your conf dir, overwrite the old files. Please make sure before you do it, backup your old files (especially wallet.dat - though these files do not overwrite it, you should always backup your wallet file). Using addnodes from OP, and open qt again, you should be syncing to the correct chain. If your wallet amount not correct, go to console (Help->debug Window->Console), and type repairwallet, you should be fine. BTW, if you sync'ed to the right chain, and sometimes it says "downloading 1600 blocks and out of sync to 128xxx", it's fine, you are actually in sync, you can send tx etc, it won't go back to the wrong chain. The message should go away after a while and you go back to sync. supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy yes legit
|
|
|
|
ponch85
|
|
June 29, 2014, 07:59:45 PM |
|
supercointeam, can you confirm this account is legit ? haven't seen this account before, it hasn't posted for 11 days and now suddenly it posts a download link... fishy
anyway it's only a blockchain file
|
|
|
|
|
supercoindev
Member
Offline
Activity: 213
Merit: 10
|
|
June 29, 2014, 08:02:40 PM |
|
nice to see you still online supercointeam
|
|
|
|
|