Regeth
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 10, 2014, 04:23:25 AM |
|
Ok, thank you for the quick reply!
|
|
|
|
Burning
Newbie
Offline
Activity: 27
Merit: 0
|
|
August 10, 2014, 07:57:01 PM |
|
I am running a R-Box with BFGMiner and getting an error pretty frequently:
"No task Request? Probably lost, Resending task X" where X can be a 0 or 1.
I am running 4.6.0 on Windows 7. I am running a second instance of BFG which is mining with Antminer U2s and I have yet to see the error with those. Just seems to happen with the R-Box.
I did some searching and couldn't come up with any fixes. Any ideas?
-B
|
|
|
|
bmoscato
|
|
August 10, 2014, 08:28:37 PM |
|
I am running a R-Box with BFGMiner and getting an error pretty frequently:
"No task Request? Probably lost, Resending task X" where X can be a 0 or 1.
I am running 4.6.0 on Windows 7. I am running a second instance of BFG which is mining with Antminer U2s and I have yet to see the error with those. Just seems to happen with the R-Box.
I did some searching and couldn't come up with any fixes. Any ideas?
-B
I have the same issue on 4.5.0, U1 and U2s run fine, RBOX has a lot of errors. bfgminer version 4.5.0 - Started: [2014-08-02 20:23:13] - [ 7 days 20:04:47] [M]anage devices [P]ool management [ S ]ettings [D]isplay options [H]elp [Q]uit Pool 0: uk1.ghash.io Diff:32 +Strtm LU:[16:27:39] User:bmoscato.worke Block: ...0def05ee #314950 Diff:19.7G (141.2Ph?) Started: [16:26:31] ST:16 F:15 NB:1224 AS:0 BW:[ 42/ 48 B/s] E:273.15 I:55.18uBTC/hr BS:6.95 11/14 37.0C | 54.12/54.63/51.98Gh/s | A:255935 R:335+4(.17%) HW:76097/.85% ------------------------------------------------------------------------------- AMU 0: | 1.99/ 2.01/ 1.80Gh/s | A: 8846 R: 7+0(.08%) HW: 0/none AMU 1: | 2.01/ 2.01/ 1.80Gh/s | A: 8754 R: 10+0(.11%) HW: 0/none AMU 2: | 2.02/ 2.01/ 1.80Gh/s | A: 8824 R: 4+1(.41%) HW: 0/none AMU 3: | 2.01/ 2.01/ 1.80Gh/s | A: 8847 R: 7+0(.08%) HW: 0/none AMU 4: | 2.02/ 2.01/ 1.80Gh/s | A: 8763 R: 9+0(.10%) HW: 0/none AMU 5: | 1.99/ 2.01/ 1.80Gh/s | A: 8971 R: 4+0(.04%) HW: 0/none RKM 0: 37.0C | 33.82/34.52/33.98Gh/s | A:167412 R:272+1(.18%) HW:76097/1.3%AMU 6: | 1.98/ 2.01/ 1.79Gh/s | A: 8954 R: 4+1(.40%) HW: 0/none AMU 7: | 2.02/ 2.01/ 1.80Gh/s | A: 8866 R: 5+1(.07%) HW: 0/none AMU 8: | 2.02/ 2.01/ 1.81Gh/s | A: 8963 R: 7+0(.08%) HW: 0/none AMU 9: | 2.03/ 2.01/ 1.80Gh/s | A: 8738 R: 6+0(.07%) HW: 0/none ------------------------------------------------------------------------------- [2014-08-10 16:27:55] RKM 0c: No task request? Probably lost, resending task 1 [2014-08-10 16:27:56] RKM 0d: No task request? Probably lost, resending task 1 [2014-08-10 16:28:00] Accepted 026f8d71 AMU 4 Diff 105/32 [2014-08-10 16:28:04] Accepted 05fb5b9e RKM 0b Diff 42/32 [2014-08-10 16:28:05] Accepted 0716e8c7 AMU 4 Diff 36/32 [2014-08-10 16:28:05] Accepted 01226e64 AMU 5 Diff 225/32
|
|
|
|
Burning
Newbie
Offline
Activity: 27
Merit: 0
|
|
August 10, 2014, 08:54:13 PM |
|
I don't seem to have too big of an issue with HW errors. I am holding steady at .81%. My biggest concern is that when the Task error appears, my hashrate drops significantly. The issue seems to crop up every 20 minutes or so. I am on Ghash as well. I wonder if it is a network based issue?
-B
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 10, 2014, 09:28:45 PM |
|
That's just a fact of life with R-Boxes
|
|
|
|
bmoscato
|
|
August 10, 2014, 10:04:39 PM |
|
That's just a fact of life with R-Boxes Thanks for the quick reply.
|
|
|
|
Taugeran
|
|
August 13, 2014, 03:16:50 AM |
|
GUESS WHAT I SMELL!!!
spondoolies support is a-coming!!!!!!
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
August 13, 2014, 04:02:51 AM |
|
The do test it out from what I understand. I should have asked Zvi when I interviewed him. GUESS WHAT I SMELL!!!
spondoolies support is a-coming!!!!!!
|
|
|
|
Taugeran
|
|
August 13, 2014, 04:30:29 AM |
|
The do test it out from what I understand. I should have asked Zvi when I interviewed him. GUESS WHAT I SMELL!!!
spondoolies support is a-coming!!!!!!
luke with in the last 24 hrs has posted a branch named minergate
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
August 13, 2014, 04:34:05 AM |
|
I saw that. This can be big. It it performs better on the SP30 than cgminer you know Zvi will have it in there in a heartbeat. My SP30 review is in the pending pile at CCN and I got to interview Zvi quickly for it as he was massively busy. Pretty cool stuff. The do test it out from what I understand. I should have asked Zvi when I interviewed him. GUESS WHAT I SMELL!!!
spondoolies support is a-coming!!!!!!
luke with in the last 24 hrs has posted a branch named minergate
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 13, 2014, 04:37:05 AM |
|
It it performs better on the SP30 than cgminer you know Zvi will have it in there in a heartbeat. Unlikely, since the minergate driver is just using Spondoolies' minergate software, which does the actual driver implementation. Will probably write another, standalone, driver eventually if it makes sense, but this was a quicker way to get things working at least
|
|
|
|
Taugeran
|
|
August 13, 2014, 01:10:28 PM |
|
Hey what works work. Gotta have someplace for baseline
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Dustdevels
Member
Offline
Activity: 68
Merit: 10
|
|
August 14, 2014, 03:38:05 AM |
|
im waiting for the technobit support as i have one of those pieces of shiat and would prefer to be able to run it with my other stuff at the same time then having like 2 or 3 different things running to to run the units i have
|
BTC: 1Bso4UR6urrH6uWUoq8wwJTsXvFdpT8k7A LTC: LPCxacePcpC9UUfjvDXSdeStLumsH9J6Sg
|
|
|
PSL
Member
Offline
Activity: 166
Merit: 10
|
|
August 16, 2014, 02:13:37 PM Last edit: August 16, 2014, 06:44:21 PM by PSL |
|
Gentlemen, I can remotely crash bfgminer, core dump is 100% repeatable: $ printf 'stats' | nc bfgminer 4028 or $ printf '{"command":"stats"}' | nc bfgminer 4028 bfgminer is the latest from GIT running at older Ubuntu host and it is mining some SCRYPT coin with one ZEUS miner connected to USB port. Other commands I tried work OK, like this one: $ printf 'summary' | nc bfgminer 4028 I found this problem when I tried to monitor this host... Some debug example: [2014-08-16 16:17:01] ZUS 0aa: Got work 139 from get queue to get work for thread 0 [2014-08-16 16:17:01] PROOF OF WORK RESULT: true (yay!!!) [2014-08-16 16:17:01] Accepted 00304fa1 ZUS 0as Diff 20m/3m [2014-08-16 16:17:09] API: connection from 10.11.10.101 - Accepted Segmentation fault (core dumped) command: (5) 'stats'
This is fast and dirty workaround, I know it is bad but it address crashes and I can use miner API: $ git diff -u api.c diff --git a/api.c b/api.c index 1bfd9bb..5aff5f3 100644 --- a/api.c +++ b/api.c @@ -3012,7 +3012,7 @@ static void minerstats(struct io_data *io_data, __maybe_unused SOCKETTYPE c if (cgpu && cgpu->drv) { if (cgpu->drv->get_api_stats) - extra = cgpu->drv->get_api_stats(cgpu); + extra = NULL; else extra = NULL;
This condition is part of a loop, bfgminer crashes when index j is 1 and it points to zeusminer driver, some structure is not initialized. Loop is run 48 times (or 8 times when zeusminer:chips=1). My ZEUSMINER is Blizzard, it has 6 ASIC chips. I tried to add parameter --set-device zeusminer:chips=1 but it doesn't help...
|
|
|
|
PSL
Member
Offline
Activity: 166
Merit: 10
|
|
August 16, 2014, 07:34:11 PM |
|
I tried to solo mine a dead scrypt coin with low difficulty. I was the only miner and in few seconds I found 13 blocks, I can see them in the wallet. But I see that bfgminer reports, it detected 27 new blocks on the network. That is a bug in bfgminer, only 14 new blocks were there (13 blocks solved and one, the last one, unsolved). New blocks (NB:) and accepted blocks were seen in ncurses screen and I can see them in final report: [2014-08-16 21:25:40] Runtime: 0 hrs : 0 mins : 44 secs [2014-08-16 21:25:40] Average hashrate: 1.5 Megahash/s [2014-08-16 21:25:40] Solved blocks: 13 [2014-08-16 21:25:40] Best share difficulty: 77m [2014-08-16 21:25:40] Share submissions: 13 [2014-08-16 21:25:40] Accepted shares: 13 [2014-08-16 21:25:40] Rejected shares: 0 + 0 stale (0.00%) [2014-08-16 21:25:40] Accepted difficulty shares: 0 [2014-08-16 21:25:40] Rejected difficulty shares: 0 [2014-08-16 21:25:40] Hardware errors: 0 [2014-08-16 21:25:40] Network transfer: 621.0 / 262.7 kB ( 15.5 / 6.6 kB/s) [2014-08-16 21:25:40] Efficiency (accepted shares * difficulty / 2 KB): 0.00 [2014-08-16 21:25:40] Utility (accepted shares / min): 19.48/min [2014-08-16 21:25:40] Unable to get work from server occasions: 0 [2014-08-16 21:25:40] Work items generated locally: 0 [2014-08-16 21:25:40] Submitting work remotely delay occasions: 0 [2014-08-16 21:25:40] New blocks detected on network: 27
And these are messages during mining: [2014-08-16 21:37:11] Found block for pool 0! [2014-08-16 21:37:11] Accepted 01c69dd4 ZUS 0bi Diff 2m/2m [2014-08-16 21:37:11] New block detected on network ZUS0 | 20s: 0.20 avg: 1.44 u: 0.51 Mh/s | A:1 R:0+0(none) HW:0/none [2014-08-16 21:37:11] New block detected on network 20s: 0.49 avg: 1.27 u: 0.45 Mh/s | A:1 R:0+0(none) HW:0/none [2014-08-16 21:37:14] Found block for pool 0! [2014-08-16 21:37:14] Accepted 011f1b60 ZUS 0as Diff 3m/2m [2014-08-16 21:37:14] New block detected on network ZUS0 | 20s: 0.20 avg: 1.22 u: 0.86 Mh/s | A:2 R:0+0(none) HW:0/none [2014-08-16 21:37:14] New block detected on network [2014-08-16 21:37:17] Found block for pool 0! [2014-08-16 21:37:17] Accepted 018790f8 ZUS 0be Diff 2m/2m [2014-08-16 21:37:17] New block detected on network ZUS0 | 20s: 0.31 avg: 1.44 u: 1.12 Mh/s | A:3 R:0+0(none) HW:0/none [2014-08-16 21:37:17] New block detected on network
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
|
August 17, 2014, 02:43:16 AM |
|
NEW VERSION 4.7.0, AUGUST 17 2014Human readable changelog:- avalonmm: Guess sensible defaults when user does not specify clock/voltage.
- minergate: New driver supporting the Spondoolies SP10.
- Stratum: Support for mining.set_extranonce extension; put "#xnsub" at the end of the pool URI to enable.
Full changelog:- openwrt/multibuild: Avoid copying bitforce-firmware-flash, which is no longer included
- AUTHORS: Simpler design, alphabetise lists
- Remove obsolete SuSE packaging
- Bugfix: test_hash: Fix Htarg calculation for exact binary divisions of diff 1
- Fix target calculation from diff < 1.0 in test_hash()
- avalonmm: Try to autodetect a sane default voltage and clock from MM version
- avalonmm: Only poll one module at a time, so they don't try to talk over each other
- avalonmm: Set baud rate for detection
- Stratum: Ignore response from mining.extranonce.subscribe
- Stratum: Implement mining.set_extranonce, and advertise support for it to pools with a #xnsub flag
- Stratum: Keep nonce1 and n2size in a "staging" state until mining.notify is received
- Stratum: Avoid putting new targets on pool stratum_work until mining.notify is received for it
- minergate: Flush during init
- minergate: Flush ready-to-queue list
- minergate: Avoid preparing new jobs to queue while we are pending a flush, since the flush would occur after queuing the new jobs
- minergate: Check for reused job ids
- minergate: Avoid counting flushed jobs toward hashes done
- minergate: Report all temperatures individually to RPC
- minergate: Load temperatures from stats file
- minergate: Implement hashmeter
- minergate: Scale nonce difficulty up to pdiff 32
- minergate: Implement mining
- minergate: Support for detecting a SP10
- Bugfix: configure: avalonmm needs work2d
- Bugfix: bitforce: Remove sanity check triggered by race conditions on 65nm devices
- Bugfix: bitforce: Avoid double-free of voltage data
|
|
|
|
cowboy
Newbie
Offline
Activity: 2
Merit: 0
|
|
August 17, 2014, 10:41:27 PM |
|
hallo Freunde ,
ich bin in dieser BFGMINER neu.Ich habe mir BFGMINER herunter geladen.Ich bekomme es zum laufen aber wie mann das nennt arbeiten die Arbeiter nicht.Ich glaube habe Problem .
Kann mir bitte ein freund da ein bischen hilfe leisten. Ich danke im voraus. Ich bekomme immer dieses in Erscheinung.
gminer version 4.7.0 - Started: [2014-08-17 23:23:56] - [ 0 days 01:11:49] ]anage devices [P]ool management ettings [D]isplay options [H]elp [Q]uit ol 0: ...ning.eligius.st Diff:128 +Strtm LU:[00:35:45] User:Name ock: ...ce0a2fe7 #316151 Diff:19.7G (141.2Ph?) Started: [00:34:08] :2 F:0 NB:9 AS:0 BW:[247/ 3 B/s] E:0.00 I: 0.00 BTC/hr BS:0 | 0.0/ 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none ----------------------------------------------------------------------------- DEVICES FOUND: Press 'M' and '+' to add ----------------------------------------------------------------------------- 9", "error": [-3, "Method 'mining.get_transactions' not found", null]} 014-08-18 00:35:45] Received no-transaction-list response for pool 0 job 1408 809 220709 014-08-18 00:35:45] Generated stratum header 00000002ce0a2fe7f03b8a21fba47da9 061df7dd5951d1475fe400000000000000000dda165f7698e35028aa67f00694d6aed665c0426 7c222773e0ffc70dba0dd53f12db91837ba6200000000 014-08-18 00:35:45] Work job_id 1408314809 220709 nonce2 01000000 014-08-18 00:35:45] Generated stratum work 014-08-18 00:35:45] Pushing work 1024 from pool 0 to hash queue 014-08-18 00:35:45] Selecting pool 0 for work 014-08-18 00:35:45] Generated stratum header 00000002ce0a2fe7f03b8a21fba47da9 061df7dd5951d1475fe4000000000000000001dcb036c4619e35e6ad934d7f5dca30acd612f5a 80a0c341d5f727172e48053f12db91837ba6200000000 014-08-18 00:35:45] Work job_id 1408314809 220709 nonce2 02000000 014-08-18 00:35:45] Generated stratum work 014-08-18 00:35:45] Pushing work 1026 from pool 0 to hash queue
Danke
|
|
|
|
swiftshoot
|
|
August 18, 2014, 09:58:27 PM |
|
Hello all,
I am using Minera with BFGMiner but I have noticed that BFGMiner is not letting me hash at full speed. I only can get 70% of the throughput before getting hardware errors. Additionally, I have noticed that BFGMiner taking up CPU load up to 3.5 I think there may be a bottleneck somewhere within BFGMiner that is causing this excessive CPU usage.
My Miners are 2 x Zeus Lightning X6. I should be able to hit 84 MHs with both units... as per CGMiner.
Here are some stats top - 17:40:15 up 24 min, 2 users, load average: 1.42, 1.91, 1.93 Tasks: 91 total, 2 running, 89 sleeping, 0 stopped, 0 zombie %Cpu(s): 77.7 us, 5.7 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 16.6 si, 0.0 st KiB Mem: 447996 total, 224060 used, 223936 free, 21644 buffers KiB Swap: 102396 total, 0 used, 102396 free, 126008 cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2999 minera 20 0 184m 10m 3316 R 91.5 2.5 15:13.96 bfgminer 3397 minera 20 0 4688 1448 1028 R 1.9 0.3 0:11.55 top 2502 root 20 0 24460 7444 2344 S 1.0 1.7 0:08.97 wicd 3506 root 20 0 0 0 0 S 1.0 0.0 0:01.60 kworker/u2:0 2833 root 20 0 0 0 0 S 0.6 0.0 0:09.48 kworker/u2:3 18 root 20 0 0 0 0 S 0.3 0.0 0:02.93 kworker/0:1 2132 messageb 20 0 3312 1248 880 S 0.3 0.3 0:04.05 dbus-daemon 2540 root 20 0 14992 8040 3984 S 0.3 1.8 0:06.25 wicd-monitor 3348 root 20 0 0 0 0 S 0.3 0.0 0:04.44 kworker/u2:2 3376 minera 20 0 9260 1460 872 S 0.3 0.3 0:01.90 sshd 1 root 20 0 2148 720 616 S 0.0 0.2 0:02.05 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
$ uname -a Linux minera 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux
bfgminer version 4.6.0-6-g8f60a5f - Started: [2014-08-18 17:18:10] - [ 0 days 00:24:07] [M]anage devices [P]ool management ettings [D]isplay options [H]elp [Q]uit Pool 0: ...t.xxxxxxxxx.com Diff:139m +Strtm LU:[17:41:29] User:xxxxxx Block: ...f9b7ad0d #342059 Diff:1.14k ( 8.19G) Started: [17:40:39] ST:0 F:0 NB:72 AS:0 BW:[ 49/ 37 B/s] E:0.31 I: 2.06 BTC/hr BS:58 0 | 11.69/67.84/56.16Mh/s | A:342 R:13+0(6.5%) HW:17/3.4% -------------------------------------------------------------------------------------------------------- ZUS 0: | 36.36/34.36/26.60Mh/s | A:168 R: 3+0(3.6%) HW: 8/3.5% ZUS 1: | 36.63/33.36/29.46Mh/s | A:174 R:10+0(9.0%) HW: 9/3.3% -------------------------------------------------------------------------------------------------------- [2014-08-18 17:38:54] Stratum from pool 0 detected new block [2014-08-18 17:39:04] Network difficulty changed to 75 (542.8M) [2014-08-18 17:39:04] Stratum from pool 0 detected new block [2014-08-18 17:39:08] Accepted 0000c36d ZUS 1aah pool 0 Diff 1/139m [2014-08-18 17:39:26] Accepted 00020517 ZUS 0bsa pool 0 Diff 495m/139m [2014-08-18 17:39:29] Network difficulty changed to 71 (512.4M) [2014-08-18 17:39:29] Stratum from pool 0 detected new block [2014-08-18 17:39:54] Accepted 0004bac5 ZUS 1crx pool 0 Diff 211m/139m [2014-08-18 17:40:04] Network difficulty changed to 777 ( 5.57G) [2014-08-18 17:40:04] Stratum from pool 0 detected new block [2014-08-18 17:40:18] Network difficulty changed to 864 ( 6.19G) [2014-08-18 17:40:18] Stratum from pool 0 detected new block [2014-08-18 17:40:18] Rejected 00031339 ZUS 1bqj pool 0 Diff 325m/139m (Job 'd0d' not found) [2014-08-18 17:40:21] Accepted 000019cc ZUS 1bms pool 0 Diff 9/139m [2014-08-18 17:40:29] Network difficulty changed to 943 ( 6.75G) [2014-08-18 17:40:29] Stratum from pool 0 detected new block [2014-08-18 17:40:32] Accepted 0000b5f3 ZUS 1atj pool 0 Diff 1/139m [2014-08-18 17:40:39] Network difficulty changed to 1.05k ( 7.51G) [2014-08-18 17:40:39] Stratum from pool 0 detected new block [2014-08-18 17:40:39] Network difficulty changed to 1.14k ( 8.19G) [2014-08-18 17:40:39] Stratum from pool 0 detected new block [2014-08-18 17:40:40] Accepted 0002b5e3 ZUS 0bba pool 0 Diff 368m/139m [2014-08-18 17:40:44] Accepted 00009c2b ZUS 0bln pool 0 Diff 1/139m [2014-08-18 17:40:57] Accepted 00062f64 ZUS 0anj pool 0 Diff 161m/139m [2014-08-18 17:40:57] Accepted 0004773b ZUS 0cuz pool 0 Diff 223m/139m [2014-08-18 17:41:04] Pool 0 is issuing work for an old block: 14c35242631263d87ffc1fdcd26bd74046e5ddc2 f7f531d56aab5a4aeb9f3fab
|
Build your own Cloud Miner! https://cex.io/r/1/swiftshoot/0/ to Make your BTC Mine for you. 3% referral bonus if you sign up others... please use my referral code if you want to join. You can also redeem your hardware after you get enough GHS. btc: ltc: other altcoins: send me PM for address.
|
|
|
nwoolls
|
|
August 19, 2014, 05:30:57 AM |
|
I am using Minera with BFGMiner but I have noticed that BFGMiner is not letting me hash at full speed. I only can get 70% of the throughput before getting hardware errors. Additionally, I have noticed that BFGMiner taking up CPU load up to 3.5 I think there may be a bottleneck somewhere within BFGMiner that is causing this excessive CPU usage.
My Miners are 2 x Zeus Lightning X6. I should be able to hit 84 MHs with both units... as per CGMiner.
Unfortunately we do not have access to this specific hardware to test. Can you test on a PC by chance?
|
MultiMiner: Any Miner, Any Where, on Any Device | Xgminer: Mine with popular miners on Mac OS X
|
|
|
swiftshoot
|
|
August 19, 2014, 05:42:28 AM |
|
I am using Minera with BFGMiner but I have noticed that BFGMiner is not letting me hash at full speed. I only can get 70% of the throughput before getting hardware errors. Additionally, I have noticed that BFGMiner taking up CPU load up to 3.5 I think there may be a bottleneck somewhere within BFGMiner that is causing this excessive CPU usage.
My Miners are 2 x Zeus Lightning X6. I should be able to hit 84 MHs with both units... as per CGMiner.
Unfortunately we do not have access to this specific hardware to test. Can you test on a PC by chance? I am currently running the CGMiner 3.1.1 with Zeus support from Zeusminers on an EeePC running Windows XP and it is working fine... I will try with BFGMiner once I download it for Windows.
|
Build your own Cloud Miner! https://cex.io/r/1/swiftshoot/0/ to Make your BTC Mine for you. 3% referral bonus if you sign up others... please use my referral code if you want to join. You can also redeem your hardware after you get enough GHS. btc: ltc: other altcoins: send me PM for address.
|
|
|
|