ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
August 03, 2014, 06:56:05 PM |
|
I see that the WarMachine is now an option on the ZenController. I do not have one to test with right now though. Bought a Gawminer warmachine, and i'm unable to configure this with zenminer. Is there no support yet? The option is there, but when i click on it doesn't show war machine. I have black widow, fury and falcon as options. What is going on, are these things used? Was there supposed to be an activation code or something?
I know my hardware is 99% sure it's correct. I also know the pool is set up correctly.
Has Zenminers fully set up support for gawminer yet, or is there some other reason i'm unable to use it. No tech support, but opening a ticket which as been 48 hours and nothing. No phone, nothing online. I'm completely stuck here and haven't been able to find a thing online how to fix this problem
Anyone else have a war machine and zenminer and knows what is going on or thinks they know the problem? Could it be zenminer has not set up configurations on there end yet?
|
|
|
|
ShibaWow
|
|
August 03, 2014, 07:02:07 PM |
|
can't wait for 8th August My Antminers become active
|
|
|
|
Ilan1
|
|
August 12, 2014, 08:15:16 AM |
|
Does anyone know what ZenPoints are worth? I see that you can trade them in for more kit?
How do you qualify for ZenPoints?
Thanks
|
|
|
|
adrenaline_x
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 14, 2014, 08:11:43 PM |
|
I run my miner in a datacenter which has a strict firewall between it and the isp.
What ports are required for the zenminer to connect to zenminer.com/zenos? It never detects my controller.
I'm the firewall admin and i have all traffic currently allowed out from the miner with out any change.. super annoying.
i'm reflashing the sd to see if that make any difference.
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
August 14, 2014, 10:50:01 PM |
|
Does anyone know what ZenPoints are worth? I see that you can trade them in for more kit?
How do you qualify for ZenPoints?
Thanks
Once you hold BTC in your Zencloud account you get the points. It's about 7-10% interest yearly from what I read. So I'd rather not risk it and have them go MtGox on me. Besides, when transferring money to them (on your own account) it quickly hops over several accounts and gets split a few times. I don't feel a big deal of trust there As far as I can figure out you'll get 0.000001 per 0,01 you hold.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
August 27, 2014, 04:15:21 AM |
|
I run my miner in a datacenter which has a strict firewall between it and the isp.
What ports are required for the zenminer to connect to zenminer.com/zenos? It never detects my controller.
I'm the firewall admin and i have all traffic currently allowed out from the miner with out any change.. super annoying.
i'm reflashing the sd to see if that make any difference.
Ever get your zenminer working? I am trying to connect my Black Widow right now,been "searching" for my miner for a good 10 minutes and nothing
|
|
|
|
Professor James Moriarty
aka TheTortoise
Sr. Member
Offline
Activity: 434
Merit: 250
|
|
August 27, 2014, 01:13:30 PM |
|
So did we got an answer for how the in the world does zenminer makes that much profit mining comparing to other pools?
|
|
|
|
crackfoo
Legendary
Offline
Activity: 3542
Merit: 1126
|
|
August 27, 2014, 02:21:54 PM |
|
So did we got an answer for how the in the world does zenminer makes that much profit mining comparing to other pools?
they take nearly 50% back in fee's. So while the initial earnings look much higher than typical pool's, I think they earn it back by their service fee... However the service fee's reduce over time... maybe I'm wrong though.
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
August 27, 2014, 06:38:54 PM |
|
I run my miner in a datacenter which has a strict firewall between it and the isp.
What ports are required for the zenminer to connect to zenminer.com/zenos? It never detects my controller.
I'm the firewall admin and i have all traffic currently allowed out from the miner with out any change.. super annoying.
i'm reflashing the sd to see if that make any difference.
Ever get your zenminer working? I am trying to connect my Black Widow right now,been "searching" for my miner for a good 10 minutes and nothing After 4+ hours I gave up! Bueller... Bueller...
|
|
|
|
alienesb
|
|
August 27, 2014, 06:54:35 PM |
|
I run my miner in a datacenter which has a strict firewall between it and the isp.
What ports are required for the zenminer to connect to zenminer.com/zenos? It never detects my controller.
I'm the firewall admin and i have all traffic currently allowed out from the miner with out any change.. super annoying.
i'm reflashing the sd to see if that make any difference.
Ever get your zenminer working? I am trying to connect my Black Widow right now,been "searching" for my miner for a good 10 minutes and nothing After 4+ hours I gave up! Bueller... Bueller... I've been hit and miss with the zen miner pi. The first time I tried it just wouldn't work. Fine, hook up the miner to a PC and run it there instead. I got another Black Widow and then that driver would just not work, not at all on the same machine or a different one. Hook up the latest Zen miner pi and low and behold it works for the one... then I plug in the other and it worked for that one too. Flaky.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
August 27, 2014, 07:32:50 PM |
|
I run my miner in a datacenter which has a strict firewall between it and the isp.
What ports are required for the zenminer to connect to zenminer.com/zenos? It never detects my controller.
I'm the firewall admin and i have all traffic currently allowed out from the miner with out any change.. super annoying.
i'm reflashing the sd to see if that make any difference.
Ever get your zenminer working? I am trying to connect my Black Widow right now,been "searching" for my miner for a good 10 minutes and nothing After 4+ hours I gave up! Bueller... Bueller... I've been hit and miss with the zen miner pi. The first time I tried it just wouldn't work. Fine, hook up the miner to a PC and run it there instead. I got another Black Widow and then that driver would just not work, not at all on the same machine or a different one. Hook up the latest Zen miner pi and low and behold it works for the one... then I plug in the other and it worked for that one too. Flaky. Word. Thanks for the reply mate! I was hoping to b able to cut the umbilical cord on my BW but ah well. Maybe I should try a different version of the ZenOS perhaps?
|
|
|
|
vantheman169
Newbie
Offline
Activity: 58
Merit: 0
|
|
August 28, 2014, 04:16:58 AM |
|
I bought the Zencontroller thinking it would work with my Zeusminers as stated on a few different sources, but it finds my controller but not my Zeusminers. I have 2 14 MH/s Thunder X3s and there are only GAWminer tabs to switch between hardware options. Can anyone point me in the direction of the PI image that will work with Zeusminers. I was even told by Zenminer customer support that their software supports Zeusminers, but then someone else said they are working on it, can anyone please clear this up for me?
|
|
|
|
MobileWill
|
|
August 28, 2014, 04:24:58 AM |
|
I bought the Zencontroller thinking it would work with my Zeusminers as stated on a few different sources, but it finds my controller but not my Zeusminers. I have 2 14 MH/s Thunder X3s and there are only GAWminer tabs to switch between hardware options. Can anyone point me in the direction of the PI image that will work with Zeusminers. I was even told by Zenminer customer support that their software supports Zeusminers, but then someone else said they are working on it, can anyone please clear this up for me?
In the mean time try Minera. Its a image for the RPi that should work since it supports multiple miners. Just make sure and save a copy of the image that came with the zencontroller. Or just use a diff SD card.
|
miningrigrentals.com/register?ref=80
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
August 28, 2014, 05:35:36 AM |
|
I bought the Zencontroller thinking it would work with my Zeusminers as stated on a few different sources, but it finds my controller but not my Zeusminers. I have 2 14 MH/s Thunder X3s and there are only GAWminer tabs to switch between hardware options. Can anyone point me in the direction of the PI image that will work with Zeusminers. I was even told by Zenminer customer support that their software supports Zeusminers, but then someone else said they are working on it, can anyone please clear this up for me?
In the mean time try Minera. Its a image for the RPi that should work since it supports multiple miners. Just make sure and save a copy of the image that came with the zencontroller. Or just use a diff SD card. Sadly my original ZenOS SD card was stolen before I took possession of the package...the SD card and power supply were removed from my package! So I had to go off what ZenOS I could download off the web. I've been running my BW off my gaming rig currently via USB and MultiMiner/BFG I do need to find a good setup for an r-pi miner controller for my Black Widow asap. You're saying I can install Minera on Linux for R-Pi or something? Maybe NOOBS or??
|
|
|
|
MobileWill
|
|
August 28, 2014, 05:36:37 AM |
|
I bought the Zencontroller thinking it would work with my Zeusminers as stated on a few different sources, but it finds my controller but not my Zeusminers. I have 2 14 MH/s Thunder X3s and there are only GAWminer tabs to switch between hardware options. Can anyone point me in the direction of the PI image that will work with Zeusminers. I was even told by Zenminer customer support that their software supports Zeusminers, but then someone else said they are working on it, can anyone please clear this up for me?
In the mean time try Minera. Its a image for the RPi that should work since it supports multiple miners. Just make sure and save a copy of the image that came with the zencontroller. Or just use a diff SD card. Sadly my original ZenOS SD card was stolen before I took possession of the package...the SD card and power supply were removed from my package! So I had to go off what ZenOS I could download off the web. I've been running my BW off my gaming rig currently via USB and MultiMiner/BFG I do need to find a good setup for an r-pi miner controller for my Black Widow asap. You're saying I can install Minera on Linux for R-Pi or something? Maybe NOOBS or?? Minera is an image for the SD Card that is preconfigured and ready to start mining with the web interface.
|
miningrigrentals.com/register?ref=80
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
August 28, 2014, 06:09:46 AM |
|
I bought the Zencontroller thinking it would work with my Zeusminers as stated on a few different sources, but it finds my controller but not my Zeusminers. I have 2 14 MH/s Thunder X3s and there are only GAWminer tabs to switch between hardware options. Can anyone point me in the direction of the PI image that will work with Zeusminers. I was even told by Zenminer customer support that their software supports Zeusminers, but then someone else said they are working on it, can anyone please clear this up for me?
In the mean time try Minera. Its a image for the RPi that should work since it supports multiple miners. Just make sure and save a copy of the image that came with the zencontroller. Or just use a diff SD card. Sadly my original ZenOS SD card was stolen before I took possession of the package...the SD card and power supply were removed from my package! So I had to go off what ZenOS I could download off the web. I've been running my BW off my gaming rig currently via USB and MultiMiner/BFG I do need to find a good setup for an r-pi miner controller for my Black Widow asap. You're saying I can install Minera on Linux for R-Pi or something? Maybe NOOBS or?? Minera is an image for the SD Card that is preconfigured and ready to start mining with the web interface. Sweet! Thanks for your help. I will make time to give this a go! I will post back up asap. Thanks again mate!
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
August 28, 2014, 07:45:40 AM |
|
Sweet! Thanks for your help. I will make time to give this a go! I will post back up asap. Thanks again mate!
I second that. Have been using Minera for a while now and support from the developer is very good!
|
|
|
|
sacskate
|
|
August 30, 2014, 01:34:56 PM |
|
Can anyone withdrawal on zinminer? I haven't been able to withdrawal for a week now
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
August 30, 2014, 03:35:07 PM |
|
Can anyone withdrawal on zinminer? I haven't been able to withdrawal for a week now
You mean ZenCloud?
|
|
|
|
Professor James Moriarty
aka TheTortoise
Sr. Member
Offline
Activity: 434
Merit: 250
|
|
August 30, 2014, 04:50:25 PM |
|
I have bought one hashlet prime from cryptocause and received the code and registered at zencloud with it but on my zenportal it says 0 mh/s still , do you guys know why would that happen? Should I wait for it?
|
|
|
|
|