2jz
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 26, 2016, 07:58:27 AM |
|
I am user of minergate since a long time even mine few of coins with minergate. But I realize that minergate supports for cryptonote algorithm based cryptocurrencies.
SO can anyone give me info about external mining hardware work with minergate ?
Don't use minergate. Why? It gives you low hash rate for your equipment, if not the lowest. Just tested with Clymore cryptonote cpu and it gives 30-35 H/s difference. Pool is minergate. So Dual Xeon E5-2670 Minergate - 450 H/s Clymore Cryptonote CPU Miner - 480 H/s
|
|
|
|
GingerAle
Legendary
Offline
Activity: 1260
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 26, 2016, 11:08:27 AM |
|
I am user of minergate since a long time even mine few of coins with minergate. But I realize that minergate supports for cryptonote algorithm based cryptocurrencies.
SO can anyone give me info about external mining hardware work with minergate ?
Don't use minergate. Why? Minergate = bytecoin = scam. Basically, the old timers in monero don't trust anything bytecoin related. And I won't be sympathetic until they come clean with their scam.
|
|
|
|
2jz
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 26, 2016, 02:33:39 PM |
|
I am user of minergate since a long time even mine few of coins with minergate. But I realize that minergate supports for cryptonote algorithm based cryptocurrencies.
SO can anyone give me info about external mining hardware work with minergate ?
Don't use minergate. Why? Minergate = bytecoin = scam. Basically, the old timers in monero don't trust anything bytecoin related. And I won't be sympathetic until they come clean with their scam. For me it's ok, simple to use and transactions don't have any problems. I'm new in monero mining and I don't know what they did before and why it's scam but now it does not have any issues, at least for me.
|
|
|
|
tokona44
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 110
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2016, 09:44:25 PM |
|
Hey guys, im trying to start solo mining on osx with bitmonerod with start_mining address and 3 threads and it say 2016-Aug-28 23:27:35.046792 Mining has started with 3 threads, good luck! 2016-Aug-28 23:27:35.046819 Miner thread was started 2016-Aug-28 23:27:35.046825 Miner thread was started [1] 2016-Aug-28 23:27:35.046846 Miner thread was started [2] ERROR {2} {p1} 2016-08-28 23:27:35.128018 [abstract_tcp_server2.inl+955 ::handle_accept] Some problems at accept: Invalid argument, connections_count = 12 what am i doing wrong? and yeah im not new to this mining stuff i know it can be hell to find a solo block edit it say its on but hashrate: 0.0000 hashrate: 0.0000 hashrate: 0.0000 hashrate: 0.0000 hashrate: 0.0000 hashrate: 0.0000 and now this it was synced when i started 2016-Aug-28 23:51:25.654018 [P2P9][86.76.26.250:18080 OUT]Sync data returned unknown top block: 1003397 -> 1123708 [120312 blocks (83 days) behind] SYNCHRONIZATION started hashrate: 13.0526 hashrate: 13.0526 2016-Aug-28 23:51:30.786683 [P2P6][85.14.79.26:18080 OUT]Synced 1003454/1123708 2016-Aug-28 23:51:30.786900 [P2P7][69.172.146.139:18080 OUT]Synced 1003454/1123708 hashrate: 13.2632
|
|
|
|
hyc
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 88
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2016, 04:26:32 PM |
|
Looks like you've got a fairly old/slow Mac there. What model is it, how old?
|
|
|
|
Das
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 01, 2016, 12:19:11 PM |
|
For me it's ok, simple to use and transactions don't have any problems. I'm new in monero mining and I don't know what they did before and why it's scam but now it does not have any issues, at least for me.
Those who claimed Monero was a scam did not really know what they were saying. Nowadays, no one will say such a thing.
|
|
|
|
iluvbitcoins
Legendary
Offline
Activity: 2198
Merit: 1150
Freedom&Honor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 01, 2016, 01:02:18 PM |
|
There isn't any hardware for XMR mining? Is it worth it to start CPU/GPU mining concerning electricity prices ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
Looking for a signature campaign.
|
|
|
superresistant
Legendary
Offline
Activity: 2142
Merit: 1131
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 01, 2016, 03:31:24 PM |
|
There isn't any hardware for XMR mining? Is it worth it to start CPU/GPU mining concerning electricity prices ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) My miner friends told me that CPU is profitable and GPU is on par with ETH. For CPU mining you need to have AES-NI instructions. Professional CPU (servers) are the most efficient. Anti-virus will flag CPU miner software as a virus, you need to whiteflag/trust the folder and exe manually (if using Widows ofc).
|
|
|
|
Donteuqilla
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 03, 2016, 10:32:20 PM |
|
I'am looking for a low fee pool with statistics (at least avarage hashrate) and downtime e-mail notifications when using claymore miner. Right now I'am mining at minergate with low 1% fee. I don't know if they pay tx fees?! but they don't have any usable statistics and no e-mail notifications (at least i haven't found one while using claymore miner). Thank you for your help ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3752
Merit: 1973
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 02:49:22 AM |
|
I'am looking for a low fee pool with statistics (at least avarage hashrate) and downtime e-mail notifications when using claymore miner. Right now I'am mining at minergate with low 1% fee. I don't know if they pay tx fees?! but they don't have any usable statistics and no e-mail notifications (at least i haven't found one while using claymore miner). Thank you for your help ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Personally I hate minergate, so I use http://www.moneropool.com .. They are finding a lot of blocks lately even as the hash rate rises since more miners are moving over to XMR.
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
Donteuqilla
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 09:03:25 AM |
|
why are you hating them and has your pool e-mail notifications? I switched to dwarfpool because they have e-mail notifcations and free payout to polo after 5 xmr mined - but 2% fee. Dwarfpool doesn't pay tx-fees, are other pools paying them? Should be a lot if costs 0,1 XMR to send money in the network
|
|
|
|
Entrax
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 04, 2016, 12:00:40 PM |
|
Hey guys, I'm already mining (xmr) on an old Sapphire 2 GB R9 270, on 16.6.2 and raw intensity set 670 (because i got the -61 err, fixed it with that) and getting around 350 H/s I have almost free power (because of wind and solar power) thus i do not have to think much about power efficiency... So i want to buy another GPU an wondering which one it should be. Essentially i want choose between those: 4 GB Sapphire R9 380 Nitro Dual X OC, 4GB R9 290 Tri X OC or an ASUS Strix R9 380 DC2OC 4GB. Which one would deliver the best hash rate? Or can you recommend some other card from here? https://e4btc.com/output-devices/video-cards (Not over 340€ pls) I have to order there because you can pay with BTC and they're shipping from Germany (to Germany) . Thank you in advance
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3752
Merit: 1973
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 09:47:44 PM |
|
why are you hating them and has your pool e-mail notifications? I switched to dwarfpool because they have e-mail notifcations and free payout to polo after 5 xmr mined - but 2% fee. Dwarfpool doesn't pay tx-fees, are other pools paying them? Should be a lot if costs 0,1 XMR to send money in the network
Because they made me install some evil spyware-looking software, then they ripped me off .8 XMR in the end. (Yeah I know, not much but still lol). Anyhow, no, no email notifications, it's just another pool like monerohash etc... it pays out every .4 XMR, so it's good for us small miners.
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 09:52:59 PM |
|
I need a little help.... From source, I expanded the .tar.gz file cd'ed into the folder, typed make received the following: monerominer@monerominer:~/wolf-xmr-miner-0.3b$ make gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/aesb.c -o crypto/aesb.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/aesb-x86-impl.c -o crypto/aesb-x86-impl.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/c_blake256.c -o crypto/c_blake256.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/c_groestl.c -o crypto/c_groestl.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/c_keccak.c -o crypto/c_keccak.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/c_jh.c -o crypto/c_jh.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/c_skein.c -o crypto/c_skein.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c crypto/oaes_lib.c -o crypto/oaes_lib.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c cryptonight.c -o cryptonight.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c log.c -o log.o log.c: In function ‘Log’: log.c:25:3: warning: format not a string literal and no format arguments [-Wformat-security] printf(timebuf); ^ gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c net.c -o net.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c minerutils.c -o minerutils.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c gpu.c -o gpu.o gcc -D_POSIX_SOURCE -D_GNU_SOURCE -O0 -ggdb3 -std=c11 -pthread -c main.c -o main.o main.c: In function ‘PoolBroadcastThreadProc’: main.c:133:3: warning: implicit declaration of function ‘Sleep’ [-Wimplicit-function-declaration] while(pthread_mutex_trylock(&QueueMutex)) Sleep(1); ^ main.c: In function ‘SetupXMRTest’: main.c:626:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=] snprintf(Options, 31, "-I. -DWORKSIZE=%d", LocalThreads); ^ main.c:626:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat=] gcc -pthread -O0 -ggdb3 crypto/aesb.o crypto/aesb-x86-impl.o crypto/c_blake256.o crypto/c_groestl.o crypto/c_keccak.o crypto/c_jh.o crypto/c_skein.o crypto/oaes_lib.o cryptonight.o log.o net.o minerutils.o gpu.o main.o -ljansson -lOpenCL -ldl -o miner monerominer@monerominer:~/wolf-xmr-miner-0.3b$
I was told that those are -warnings- not errors, so I tried to run the miner. I tried to get the miner to work with the existing xmr.conf before I add my personal configuration, just to see if it works. This is what I tried: monerominer@monerominer:~/wolf-xmr-miner-0.3b$ miner xmr.conf No command 'miner' found, did you mean: Command 'mines' from package 'sgt-puzzles' (universe) Command 'mixer' from package 'csound-utils' (universe) miner: command not found monerominer@monerominer:~/wolf-xmr-miner-0.3b$ Am I using the correct command / format to start the miner?I also tried using WiNE...... just in case it still needs WiNE - I was trying to compile the miner so I would not have to use WiNE monerominer@monerominer:~/wolf-xmr-miner-0.3b$ wine miner xmr.conf wine: cannot find L"C:\\windows\\system32\\miner.exe" monerominer@monerominer:~/wolf-xmr-miner-0.3b$ What am I doing wrong?
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3752
Merit: 1973
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 10:06:50 PM |
|
From the looks of it, you just need to
1. make sure that miner exists in the current directory (ls -al) 2. start the miner like this ./miner --flags etc etc ( ./ is current dir).
Thanks
edit - sometimes it is named "minerd", but IDK in your case, I don't use that miner.
the problem is that your current directory is not in your %PATH% so it can't see miner, so you have to start it by ./ or fully qualified path e.g. /usr/local/src/miner-src/build/miner --flags
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 11:08:10 PM |
|
From the looks of it, you just need to
1. make sure that miner exists in the current directory (ls -al) 2. start the miner like this ./miner --flags etc etc ( ./ is current dir).
Thanks
edit - sometimes it is named "minerd", but IDK in your case, I don't use that miner.
the problem is that your current directory is not in your %PATH% so it can't see miner, so you have to start it by ./ or fully qualified path e.g. /usr/local/src/miner-src/build/miner --flags
oh derrrrrr.... I was forgetting the "./" in front of "miner" however, a new issue ---- monerominer@monerominer:~/wolf-xmr-miner-0.3b$ ./miner xmr.conf [18:01:22] Parsed pool URL: xmr.poolto.be [18:01:22] Successfully connected to pool's stratum. [18:01:22] Request: {"method": "login", "params": {"login": "438gFWUiHY68N4MUMWbgUGXyqGC47eqq65TbiTy4MyL4Fm7aRYHKPBM9aGyNbmeqWvLMC4aUsifgS719Shg38KKa8TZaXG7", "pass": "x", "agent": "wolf-xmr-miner/0.1"}, "id": 1}
[18:01:22] Got something: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"933664273004978","job":{"blob":"02039e95bdbe05b0d489689fc1bd652f8f9e8de35c28ff976410ee758c8a5cc3d4324de1f2cf6f0000000024dc732a4391e0ae70ffbdb6e6fb50933baa6a54ba950ec7e709982ea8e3f00803","job_id":"262076305435039","target":"711b0d00"},"status":"OK"}}
[18:01:23] Error -61 when calling clCreateBuffer to create hash scratchpads buffer. Segmentation fault (core dumped) monerominer@monerominer:~/wolf-xmr-miner-0.3b$
In the wolf readme it states Wolf's OpenCL XMR Miner for AMD GPUs
If you get an error about clCreateBuffer - lower your rawintensity. See the example config xmr.conf for details.
Generally, you want to raise rawintensity as high as it will go without error - but remember, 2MiB of GPU RAM is needed for every work-item. I edited the xmr.conf to reflect my GPU's stock clock and memory freqs, then reduced the intensity to 100 .... I still got the error. I reduced the intensity all the way to 1, I still got the error. I don't think its an intensity issue, more like an open cl issue perhaps? Your thoughts?
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3752
Merit: 1973
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 11:40:51 PM |
|
damn, I'm sorry but I honestly can't help you with that one, I've never mined XMR using linux and when I did it was CPU only long ago... Wolf hangs out here sometimes, and I'm sure you are not alone. Have you googled it to death yet?
Good luck! Thanks
Edit - did you have any issues installing all the AMD/opencl stuff?
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 11:42:14 PM Last edit: September 06, 2016, 11:53:45 PM by bbOOmm |
|
From the looks of it, you just need to
1. make sure that miner exists in the current directory (ls -al) 2. start the miner like this ./miner --flags etc etc ( ./ is current dir).
Thanks
edit - sometimes it is named "minerd", but IDK in your case, I don't use that miner.
the problem is that your current directory is not in your %PATH% so it can't see miner, so you have to start it by ./ or fully qualified path e.g. /usr/local/src/miner-src/build/miner --flags
oh derrrrrr.... I was forgetting the "./" in front of "miner" however, a new issue ---- monerominer@monerominer:~/wolf-xmr-miner-0.3b$ ./miner xmr.conf [18:01:22] Parsed pool URL: xmr.poolto.be [18:01:22] Successfully connected to pool's stratum. [18:01:22] Request: {"method": "login", "params": {"login": "438gFWUiHY68N4MUMWbgUGXyqGC47eqq65TbiTy4MyL4Fm7aRYHKPBM9aGyNbmeqWvLMC4aUsifgS719Shg38KKa8TZaXG7", "pass": "x", "agent": "wolf-xmr-miner/0.1"}, "id": 1}
[18:01:22] Got something: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"933664273004978","job":{"blob":"02039e95bdbe05b0d489689fc1bd652f8f9e8de35c28ff976410ee758c8a5cc3d4324de1f2cf6f0000000024dc732a4391e0ae70ffbdb6e6fb50933baa6a54ba950ec7e709982ea8e3f00803","job_id":"262076305435039","target":"711b0d00"},"status":"OK"}}
[18:01:23] Error -61 when calling clCreateBuffer to create hash scratchpads buffer. Segmentation fault (core dumped) monerominer@monerominer:~/wolf-xmr-miner-0.3b$
In the wolf readme it states Wolf's OpenCL XMR Miner for AMD GPUs
If you get an error about clCreateBuffer - lower your rawintensity. See the example config xmr.conf for details.
Generally, you want to raise rawintensity as high as it will go without error - but remember, 2MiB of GPU RAM is needed for every work-item. I edited the xmr.conf to reflect my GPU's stock clock and memory freqs, then reduced the intensity to 100 .... I still got the error. I reduced the intensity all the way to 1, I still got the error. I don't think its an intensity issue, more like an open cl issue perhaps? Your thoughts? I edited the xmr.conf with my wallet address and payment id as well as the pool that I want to mine on. However, I'm still getting that cl error, but I noticed that the pool is NOT what I entered, and the payment address is not mine. Where if the correct configuration file found. I edeted the xmr.conf found in the same folder as miner, I also found xmr.conf~ in my home folder after pressing ctrl-h. Somewhere its getting the config info to mine with a pool and address that is not mine. monerominer@monerominer:~/wolf-xmr-miner-0.3b$ ./miner xmr.conf [18:47:16] Parsed pool URL: xmr.poolto.be [18:47:17] Successfully connected to pool's stratum. [18:47:17] Request: {"method": "login", "params": {"login": "438gFWUiHY68N4MUMWbgUGXyqGC47eqq65TbiTy4MyL4Fm7aRYHKPBM9aGyNbmeqWvLMC4aUsifgS719Shg38KKa8TZaXG7", "pass": "x", "agent": "wolf-xmr-miner/0.1"}, "id": 1}
[18:47:17] Got something: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"306201277323998","job":{"blob":"0203d2a9bdbe054538459b23229928fd3a66be792f6a29c8fa04781f5f57f4bc43599d89a8bba400000000d799b581c1ee759d9f28d3c18b50d96e48fe7110428122166b299e6d3878cc2008","job_id":"959680734225548","target":"711b0d00"},"status":"OK"}}
[18:47:18] Error -61 when calling clCreateBuffer to create hash scratchpads buffer. Segmentation fault (core dumped) monerominer@monerominer:~/wolf-xmr-miner-0.3b$
xmr.conf contents { "Algorithms": [ { "name": "CryptoNight", "devices": [ { "index": 0, "corefreq": 1050, "memfreq": 1400, "fanspeed": 100, "powertune": 1, "threads": 1, "rawintensity": 1, "worksize": 1 } ], "pools": [ { "url": "stratum+tcp://xmr-usa.dwarfpool.com:8050", "user": "463tWEBn5XZJSxL]U6uLQnxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxyV3z8zctJLPCZy24jvb3NiTcTJ.7c3740cc047b4ddxxxxxxxxd5aed3ea3fdf78f", "pass": "x" } ] } ] }
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3752
Merit: 1973
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 11:45:53 PM |
|
I edited the xmr.conf with my wallet address and payment id as well as the pool that I want to mine on.
However, I'm still getting that cl error, but I noticed that the pool is NOT what I entered, and the payment address is not mine.
Where if the correct configuration file found. I edeted the xmr.conf found in the same folder as miner, I also found xmr.conf~ in my home folder after pressing ctrl-h.
Somewhere its getting the config info to mine with a pool and address that is not mine.
Do you have a link to wolf's repo you are trying to compile from? Is there a command line option to specify the conf file path or anything? thanks.
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
bbOOmm
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 06, 2016, 11:55:39 PM |
|
I edited the xmr.conf with my wallet address and payment id as well as the pool that I want to mine on.
However, I'm still getting that cl error, but I noticed that the pool is NOT what I entered, and the payment address is not mine.
Where if the correct configuration file found. I edeted the xmr.conf found in the same folder as miner, I also found xmr.conf~ in my home folder after pressing ctrl-h.
Somewhere its getting the config info to mine with a pool and address that is not mine.
Do you have a link to wolf's repo you are trying to compile from? Is there a command line option to specify the conf file path or anything? thanks. right from github ... https://github.com/wolf9466/wolf-xmr-miner/releasesI downloaded the Source Code tar.gz file
|
|
|
|
|