nexus99
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 23, 2014, 04:18:13 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Yes, that is all good. I think many folks have done some of those mods to the S1. Especially the fan and shroud. I want to be able to stack them with S1 and use the same PSU set up.
|
|
|
|
dropt
Legendary
Offline
Activity: 1512
Merit: 1000
|
|
June 23, 2014, 04:41:07 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine.
|
|
|
|
allcoinminer
|
|
June 23, 2014, 04:42:22 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine. I think I read it somewhere in the bitmain's OP post will look and quote it here. Update: Already quoted below by s1gs3gv.
|
|
|
|
s1gs3gv
Legendary
Offline
Activity: 1316
Merit: 1014
ex uno plures
|
|
June 23, 2014, 04:43:15 PM |
|
"The design of heat sink is customized but it is compatible with the hashing board of S1."
From the OP
|
|
|
|
nexus99
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 23, 2014, 04:45:35 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine. I think I read it somewhere in the bitmain's OP post will look and quote it here. I'd assume that there might be some tweaking to the HS to get it to mount to the modified board. But maybe they are able to produce the boards to handle the exact same HS? That would be optimal if they can do it. Same mounting solution, same controllers, same heat sync, same fans (just 2)... just stick the new chips on the board and tweak it. Not a bad plan. Especially when you are building on such a successful product.
|
|
|
|
Mudbankkeith
|
|
June 23, 2014, 05:02:09 PM Last edit: June 23, 2014, 05:14:45 PM by Mudbankkeith |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine. I think I read it somewhere in the bitmain's OP post will look and quote it here. I'd assume that there might be some tweaking to the HS to get it to mount to the modified board. But maybe they are able to produce the boards to handle the exact same HS? That would be optimal if they can do it. Same mounting solution, same controllers, same heat sync, same fans (just 2)... just stick the new chips on the board and tweak it. Not a bad plan. Especially when you are building on such a successful product. Minimum change = maximum profit PS will there be a U3 usb device?
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
R4v37
|
|
June 23, 2014, 06:07:37 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine. I think I read it somewhere in the bitmain's OP post will look and quote it here. I'd assume that there might be some tweaking to the HS to get it to mount to the modified board. But maybe they are able to produce the boards to handle the exact same HS? That would be optimal if they can do it. Same mounting solution, same controllers, same heat sync, same fans (just 2)... just stick the new chips on the board and tweak it. Not a bad plan. Especially when you are building on such a successful product. Minimum change = maximum profit PS will there be a U3 usb device? U3... it'll as big as my phone
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8722
'The right to privacy matters'
|
|
June 23, 2014, 06:43:09 PM |
|
I am hoping that the S3 is the exact same form factor as the S1. With interchangeable blades even.
Yes. But S3 additionally having a housing for better cooling, An additional Fan, A modified Heat Sink, Frame also have some changes but all are compatible with S1. Where are you getting the "modified" heatsink idea from? Just curious as I know that the current heatsink handles 400W of dissipation just fine. I think I read it somewhere in the bitmain's OP post will look and quote it here. I'd assume that there might be some tweaking to the HS to get it to mount to the modified board. But maybe they are able to produce the boards to handle the exact same HS? That would be optimal if they can do it. Same mounting solution, same controllers, same heat sync, same fans (just 2)... just stick the new chips on the board and tweak it. Not a bad plan. Especially when you are building on such a successful product. Minimum change = maximum profit PS will there be a U3 usb device? well the chip needs to be underclocked a lot to be a usb device. BTW it is a good idea if someone was to offer a legit solo mining pool. A U3 with 2.5 watts used to do 6gh marketed as a btc lottery ticket would sell. I would want it if there was a solo pool set up by a real pool op. Unfortunately no pool op with a stellar rep has offered a solo option. Most people do not realize that a lottery ticket on a 3 digit number that pays at 1100 or 1200 to one is not gambling it is investing. The same people that compare solo mining to lottery tickets don't realize the favorability of solo mining over a government 3 or 4 digit ticket.
|
|
|
|
tuaris
|
|
June 23, 2014, 06:47:12 PM |
|
well the chip needs to be underclocked a lot to be a usb device.
BTW it is a good idea if someone was to offer a legit solo mining pool.
A U3 with 2.5 watts used to do 6gh marketed as a btc lottery ticket would sell. I would want it if there was a solo pool set up by a real pool op.
Unfortunately no pool op with a stellar rep has offered a solo option.
Most people do not realize that a lottery ticket on a 3 digit number that pays at 1100 or 1200 to one is not gambling it is investing.
The same people that compare solo mining to lottery tickets don't realize the favorability of solo mining over a government 3 or 4 digit ticket.
I offer solo mining, not Bitcoin at the moment, but other SHA256 coins. https://bitcointalk.org/index.php?topic=601925.0
|
|
|
|
analoxide
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 23, 2014, 07:29:42 PM Last edit: June 23, 2014, 08:45:06 PM by analoxide |
|
I saw in a cached section of Google that the S3 was a scrypt miner? Anyone have any idea on this? It is cached at a URL that has an "s" on the end of bitmaintech(s).com so it might be someone playing games or is this another site that will be selling the Scrypt version of the miners? It looks like it's the real site since upon clicking it, it shows that the site is under maintenance right now and the bitmaintech.com is under maintenance right now as well.
I posted the URL below of the cached page.
"REMOVED DUE TO POTENTIAL BUYERS THAN DON'T READ IT'S A SCAM SITE"
Also, does anyone know if the S2's are being discontinued completely and that they are literally selling off the last batch of S2's that will ever be sold by them?
Thanks!
|
|
|
|
ChuckBuck
|
|
June 23, 2014, 07:35:48 PM |
|
Be careful of that link, as that one is a scam site, not the official Bitmaintech website. That one in the URL posted has an "S" after the "H" in Bitmaintech. This is the real website: https://www.bitmaintech.com/
|
|
|
|
Bitkoinzz
|
|
June 23, 2014, 08:01:52 PM |
|
Be careful of that link, as that one is a scam site, not the official Bitmaintech website. That one in the URL posted has an "S" after the "H" in Bitmaintech. This is the real website: https://www.bitmaintech.com/EXACTLY, THAT FIRST LINK IS TO A BOGUS SCAM SITE. THEY HIJACKED THE BITMAIN FACEBOOK TOO FOR A WHILE. BEWAREEEEEEE........ Bitmaintech.com only legit site.
|
|
|
|
analoxide
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 23, 2014, 08:03:00 PM Last edit: June 23, 2014, 08:44:38 PM by analoxide |
|
I saw in a cached section of Google that the S3 was a scrypt miner? Anyone have any idea on this? It is cached at a URL that has an "s" on the end of bitmaintech(s).com so it might be someone playing games or is this another site that will be selling the Scrypt version of the miners? It looks like it's the real site since upon clicking it, it shows that the site is under maintenance right now and the bitmaintech.com is under maintenance right now as well.
I posted the URL below of the cached page.
"REMOVED DUE TO POTENTIAL BUYERS THAN DON'T READ IT'S A SCAM SITE"
Also, does anyone know if the S2's are being discontinued completely and that they are literally selling off the last batch of S2's that will ever be sold by them?
Thanks!
Be careful of that link, as that one is a scam site, not the official Bitmaintech website. That one in the URL posted has an "S" after the "H" in Bitmaintech. This is the real website: https://www.bitmaintech.com/Well at the least I hope the guys at Bitmaintech can get that site wiped off if it's not them. It shows it's coming back to Germany or something. Definitely not Go Daddy like Bitmaintech.com goes back to. I do find it strange that the site was down for maintenance at the same time bitmaintech.com 's site is today. Very strange.
|
|
|
|
nottm28
|
|
June 23, 2014, 08:24:07 PM |
|
Might be better to edit your quotes and disable the scam link - rather than just leaving it there for newbies to click on...
[edit] and maybe to stop constantly requoting the scam link might help too...
|
donations not accepted
|
|
|
analoxide
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 23, 2014, 08:46:29 PM |
|
Might be better to edit your quotes and disable the scam link - rather than just leaving it there for newbies to click on...
[edit] and maybe to stop constantly requoting the scam link might help too...
Good Idea! I just edited the posts. Now if the people that reply do the same then everyone is safe.
|
|
|
|
d2dtk
|
|
June 23, 2014, 09:27:08 PM |
|
Are there any photos or layouts of the upgrade kits for the S1/S2, is it true the S2 could be upgraded to do 2Th/s?
|
|
|
|
chadwickx16
|
|
June 23, 2014, 09:46:31 PM |
|
Are there any photos or layouts of the upgrade kits for the S1/S2, is it true the S2 could be upgraded to do 2Th/s?
That's the theory right now, but nothing has been released, AFAIK, other than the drawing in the OP.
|
|
|
|
dlowings
|
|
June 23, 2014, 10:36:48 PM |
|
Are there any photos or layouts of the upgrade kits for the S1/S2, is it true the S2 could be upgraded to do 2Th/s?
That's the theory right now, but nothing has been released, AFAIK, other than the drawing in the OP. From the sounds of it, Bitmain currently has a focus on "ONE" product the S3 … The S2 thread header was changed to "Last Batch" so it sounds like they will be dropping that development . Its hard to say what Bitmain is up to, they do not have clear communication to their buyers, They pushed back their shipping date of the S2's after people ordered .. Great product but poor execution on informing their customers ..
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
Biodom
Legendary
Online
Activity: 3920
Merit: 4412
|
|
June 23, 2014, 10:44:57 PM |
|
They pushed back their shipping date of the S2's after people ordered
what do you mean-it is still June 26, isn't it?
|
|
|
|
dlowings
|
|
June 23, 2014, 10:47:14 PM |
|
They pushed back their shipping date of the S2's after people ordered
what do you mean-it is still June 26, isn't it? When I and several others ordered, the ship date was June 23rd
|
BTC donations welcome:- 1BrersvQubEKt4m2hBXDNvU1B4RiYe6J4i - Feel free to visit wiki.chainminer.com for free hardware listings, and mining info. - IRC on freenode #wiki.chainminer.com
|
|
|
|