[ANN] [ICB] IcebergCoin ❄︎ Big Update 27.11.❄︎ In-Wallet Tradebot❄︎ [MALWARE?]

[Vagnavs]

When mining starts it's going to get ugly as far as difficult goes..

[SP4RK7]

AMD miner link in the OP is broken

[Revelation]

Is it me our do some of these post sound more like jealousy then "warnings". Yes the dev could possibly make off like a fat cat if he so chooses too. But give him a chance to make good first. Crypto is a business and I've never seen a business make it without profits. Don't like the coin then move on, but AT THIS POINT we all know what the dev got in ICO. We really don't need to here it again. We've all made a decision to go in on this or sit back and watch. Grab some popcorn and enjoy the ride ether way. Cause if Dev dips out i'm sure you guys will BURN you fingers off with the "I TOLD YOU SO POSTS"......

Ok, I understand your point but given the amount of scrutiny that people demand in general for most coins it is hypocritical to be blind about Icebergcoin and hope for the best. People scream SCAM when they see 1% premine, here, we have 20% premine being already dumped for BTC.
Explain, what is the point for this dev to do anything with Icerberg coin? This coin doesn't offer anything new, as most others, and there is no incentive for the dev to do anything since he will get his paycheck very soon.

[ticoti]

Rigs prepared to mine

[pregoRI]

ok, ready for launch ...

[novymivo]

i NEEDS  some good sgminer and settings, as I am getting only 7 mhs on r9 280x...
ccc14.6 , sgminer 5.
Second rig with the same software got 8 mhs per card., wtf ??
any ideas,
Yes I deleted all bins etc., what to do ...

[Vagnavs]

This could go bad. Real bad.. With the ICO and undergroundpool.me (the official pool). But I'll try to be optimistic 

[DonQuijote]

Be careful!
Something big is coming haha

[sq]

                                                            Almost there!!!

[makinilla]

Preparing rigs...

[Pool Op2]

A Profit Seeking Auto Switching Multiport Multipool

Help us celebrate our opening with 0.05% fees on IcebergCoin!
This is the pool to be on! Wicked fast and 0.05% fees. What could be better?


Mining Information :
Pure NOMP Back End for Incredible Mining and Payout Speed
We use a lightning fast node.js stratum. All coins use Vardiff
Instant Pay to Your Wallet. We Do Not Hold Your Coins
Unique Mining Key System. One Key for All Coins!
No Usernames, Passwords, Logins or Pins
lightninghash.com

Servers :
Our Clustered Servers are Located in the USA in an Enterprise Level Data Center
Each Server has 16 Cores with 72 GB Ram and are Fully Redundant
Our Servers are on a DDOS Resistant Network
lightninghash.com

[smulork]

 After changing my rigs to NIST5 im getting 13 MH/s on my 280x rigs but temperatures are really high like avg 71c* wtf...

 i tought this was meant to be cooler than x11.   It consumes a bit extra watt power compare to x11. is 950w normal for a 5 x 280x rig???

[nanoprobe]

I have a radeon r9 290. At a test on a nist5 pool it gives me 7.9 mh on the talkcoinminer (sgminer).
Can I expect more with an other miner or different settings?
powertune 20, engine 1043, mem 1500, threadconcurency 8512, g 1, w 512, i 20, lookup gap 0

Try this
http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

Got my r9 270x from 5mh to 8.6!!!

I´ve tried this. But which kernel to use for icebergcoin? nist5 wasn´t in so I copied it to the folder but I only
get errors (share is above target) and rejected shares

Im having the same problem....any help?

sorry peeps was at work use algo talkcoin-mod

I'm using this sgminer https://bitcointalk.org/index.php?topic=632503.0

  yeah 15.3 mh   super tipp. thanks a lot. Settings same as above, but sgminer 5.0 pre release. I love it

So what the heck is wrong with mine....talkcoin sgminer I am getting 8.3 mhs with my 290x with same settings on sgminer 5 i get <3.

Post your conf/bat settings

minus pools....
"intensity" : "18",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "256",
"kernel" : "talkcoin-mod",
"lookup-gap" : "2",
"thread-concurrency" : "8128",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "0",
"gpu-fan" : "0-85",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

I highlighted the changes I recommend. Use a program like afterburner to set gpuclock and memclock. Try 1100/1500 for starters and adjust as needed. Make sure you delete any .bat files in the miner folder before starting with new settings. I'm not using the new 5 version of the miner so I'm not sure but is there suppose to be a hyphen in the kernel name. Other modded (like x11mod) miners don't use a hyphen

[RavenXBR]

Nist5 consumes 8-10% more than x11.

[jpouza]

Nist5 consumes 8-10% more than x11.

[kozmos]

WTF. selling orders under ICO's 8000k.

[RavenXBR]

Nist5 consumes 8-10% more than x11.

4 750 rig with 135/350 OC:
- x11: 250-255W at wall
- Nist5: 275-280W

[nanoprobe]

After changing my rigs to NIST5 im getting 13 MH/s on my 280x rigs but temperatures are really high like avg 71c* wtf...

71c is not hot for a gpu. Anything beow 85c is OK IMHO

i tought this was meant to be cooler than x11.   It consumes a bit extra watt power compare to x11. is 950w normal for a 5 x 280x rig???

When you're getting 3+ times more hashrate than X11 it's going to run hotter and use more power.

[jpouza]

Nist5 consumes 8-10% more than x11.

4 750 rig with 135/350 OC:
- x11: 250-255W at wall
- Nist5: 275-280W

33MH/s de hash, Raven?

abs

[lesterdsa]

All ready for the launch ...... excited