[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Hi all! Do you know how to fix the problem when main window of awesome miner software displayed above other subwindows with menus or dialogues? Sometimes I can see a piece of window and move it to another place outside the main window, but sometimes I even can not see other windows under the main window and can not control them at all.

Can you please give an example of what kind of window that are displayed incorrectly? Is it a specific Awesome Miner window like the Benchmark that shows behind the main window? Or external applications?

Hello, Patrike. This is about main window.

I've had one other user reporting this as well and I'm trying to figure out the exact scenario.

What if you exit Awesome Miner once and start it again, or minimize the application and then restore the window, do you still get the same problem?

[patrike]

Awesome Miner version 7.3.7

 ASIC mining
  - Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
 Mining software
  - CpuMiner-Opt 3.12.5
  - WildRig Miner 0.20.4
  - SrbMiner Multi 0.3.7
  - NbMiner 27.4
 Corrections
  - Correction to XmRig GPU device order reporting
  - Make Pool Configuration available via the local web interface even when running in mobile mode

[narousberg]

@patrike
yes, problem with "Unable to load NVRTC. Please check your Nvidia drivers" only on PhoenixMiner
I use Hive, maybe some libs is not installed, but i cant find this libs. I tryed older versions of Phoenix, same lib problem. Maybe this is problem of Hive platform.

Another problem just found:
If i use on Linux rig "Clocking Profile Group" where GPUs will be addressed over GPU ID then this clocking will not be applied to cards. Check pls.

[narousberg]

problem with "No go of AM in ver. 7.3.6" is solved in ver. 7.3.7

Great support Patrike! No data lost! You save my day!

Regards

[supersonic]

Awesome Miner version 7.3.7

 ASIC mining
  - Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
 Mining software
  - CpuMiner-Opt 3.12.5
  - WildRig Miner 0.20.4
  - SrbMiner Multi 0.3.7
  - NbMiner 27.4
 Corrections
  - Correction to XmRig GPU device order reporting
  - Make Pool Configuration available via the local web interface even when running in mobile mode

Not showing temps in antminers?

[patrike]

Awesome Miner version 7.3.7

 ASIC mining
  - Antminer network settings (IP address and hostname) can be configured via the toolbar Tools -> Antminer network
 Mining software
  - CpuMiner-Opt 3.12.5
  - WildRig Miner 0.20.4
  - SrbMiner Multi 0.3.7
  - NbMiner 27.4
 Corrections
  - Correction to XmRig GPU device order reporting
  - Make Pool Configuration available via the local web interface even when running in mobile mode

Not showing temps in antminers?

I just noticed this issue with Antminer detection. There will be a new version within a few minutes to correct this. Sorry for any inconvenience.

[patrike]

Awesome Miner version 7.3.8

 Corrections
  - Correction to Antminer detection (issue introduced in 7.3.7)
  - Correction to web interface when screen height was very small

[supersonic]

Awesome Miner version 7.3.8

 Corrections
  - Correction to Antminer detection (issue introduced in 7.3.7)
  - Correction to web interface when screen height was very small

Working as intended, cheers :>

[narousberg]

any investigation on problem with not applying of "Clocking profile group" in Linux ?
I have tested not only with "GPU ID" other methods (GPU Name, BUS ID) not working too.

[Marvell2]

why does this tool ignore the -di claymore commands to disable certian GPUs ?  It accepts the rxboost, strap but when I put -di 012  it still loads all six gpus

From what I can see, parameters like "-di 2" is passed correctly to Claymore miner. Can you please use the Diagnostics button in the toolbar to verify the exact command line Awesome Miner uses to launch Claymore Ethereum Miner?

hmm i guess ill try again i saw no error on diagnostics

[MoparMiningLLC]

add FCH for "define coin for pool" under SHA-256

[patrike]

any investigation on problem with not applying of "Clocking profile group" in Linux ?
I have tested not only with "GPU ID" other methods (GPU Name, BUS ID) not working too.

Is this when you have a GPU Clocking Profile being automatically applied when a miner is started? Could you please send me your Remote Agent log file via PM or mail? Thanks!

[patrike]

add FCH for "define coin for pool" under SHA-256

I've added the coin so it shows up in the list. There are however no revenue statistics for this coin yet.

[narousberg]

any investigation on problem with not applying of "Clocking profile group" in Linux ?
I have tested not only with "GPU ID" other methods (GPU Name, BUS ID) not working too.

Is this when you have a GPU Clocking Profile being automatically applied when a miner is started? Could you please send me your Remote Agent log file via PM or mail? Thanks!

PM with logs sent.
This problem occur always, by first start and by automatic switching. If i try applying of Clocking group over AM main window (GPU clocking tab>Apply GPU Clocking profile) the setting will be simple ignored.

Regards

[patrike]

Awesome Miner version 7.3.9 (Development preview of 7.4)

 ASIC mining
  - Network scan for Antminers supports a new mode where the hostname of the miner can be defined as part of the scan - also linking the hostname with the External Miner
 GPU mining
  - Edit GPU Clocking Profiles directly from the Benchmark dialog
 Features
  - The profit switcher can be configured for a second switching interval with another threshold level. Example: If the primary interval is 3 minutes with a 20% threshold, the secondary interval can be 8 minutes with a 10% threshold.
  - The profit switcher for External Miners supports the setting for Minimum time on pool
  - A profit profile can be configured to override the global value for Minimum time on pool. Can for example be used to switch pools for ASIC miners less often than GPU miners.
 Mining software
  - Gminer 1.99, incl. dual mining of Ethereum + Handshake
  - XmRig 5.8.1
  - SrbMiner Multi 0.3.8
  - NbMiner 27.5
 Correction
  - Correction to GPU Clocking Profile Groups on Linux
  - Improved behavior in case the computer time is being changed

In case direct download links are required, please use:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[soothaa]

Something is really broken in this update.. all my miners are trying to use claymore mining for managed profit or even if I specify other miners claymore details are getting passed in...

[patrike]

Something is really broken in this update.. all my miners are trying to use claymore mining for managed profit or even if I specify other miners claymore details are getting passed in...

I was not able to reproduce this issue.

For a selected miner, is the Profit Switching tab showing a correct decision (the most profitable algorithm is on top) and although this decisions indicates a specific algorithm - you always end up with Claymore Ethereum miner?
Could you please send me the log files for Awesome Miner and Remote Agent (toolbar: Tools -> Log File) via PM or mail? Thanks!

[MoparMiningLLC]

add FCH for "define coin for pool" under SHA-256

I've added the coin so it shows up in the list. There are however no revenue statistics for this coin yet.

only exchange I know that has FCH is https://www.coinex.com/ (subsidiary of ViaBTC)

and if you want to get the coin image, their site is https://freecash.org

I have my terminus mining it atm - its getting lucky and finding blocks so getting decent rewards. I just xfer it to coinex and trade it for btc on their exchange.

[narousberg]

Hi boss
in AM ver. 7.3.9 i cant more benchmark Handshake algo with NBMiner

Eaglesong not possible benchmark too

[Nel67]

Hi. My nbminer on Handshake doesn’t start at all, and today gminer doesn’t work either.