[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[ayiphelmy]

Thanks for the update. Can you please try to run gminer manually from the command line like @narousberg suggested?
cd /root/.config/AwesomeMinerService/gminer_2_06_linux64.tar_2/
./miner

Does this give additional details about the problem?

i have solve this problem, reupload with custom software and its works looks like gminer software not download properly in linux but this is only happen only with 1 rig... btw new problem is i cant setup auto fan on linux with awesome some i must use hiveos autofan setting to make that auto fan work

Can you manually set the fan speed via Awesome Miner (the GPU Clocking dialog)? Is it only the "Enable global fan speed" feature in the Options dialog, GPU settings section, that doesn't work?

ya it doesnt work... i must using hiveos autofan....

[patrike]

On-Line update does not work
"upgrades" back to 7.5.1

Can you please check if a reboot resolves this? Please see the post above for details:
https://bitcointalk.org/index.php?topic=676942.msg54231813#msg54231813

[patrike]

Thanks for the update. Can you please try to run gminer manually from the command line like @narousberg suggested?
cd /root/.config/AwesomeMinerService/gminer_2_06_linux64.tar_2/
./miner

Does this give additional details about the problem?

i have solve this problem, reupload with custom software and its works looks like gminer software not download properly in linux but this is only happen only with 1 rig... btw new problem is i cant setup auto fan on linux with awesome some i must use hiveos autofan setting to make that auto fan work

Can you manually set the fan speed via Awesome Miner (the GPU Clocking dialog)? Is it only the "Enable global fan speed" feature in the Options dialog, GPU settings section, that doesn't work?

ya it doesnt work... i must using hiveos autofan....

1) Can you please send me the Remote Agent log file via PM or e-mail (toolbar: Tools -> Log File -> Remote Agent)
2) Please also confirm if manual fan speed changes are working or not. This will be of help to understand if it's a problem with setting fan speed in general or if it's only the the global fan speed feature that isn't working.
Thanks!

[ayiphelmy]

Thanks for the update. Can you please try to run gminer manually from the command line like @narousberg suggested?
cd /root/.config/AwesomeMinerService/gminer_2_06_linux64.tar_2/
./miner

Does this give additional details about the problem?

i have solve this problem, reupload with custom software and its works looks like gminer software not download properly in linux but this is only happen only with 1 rig... btw new problem is i cant setup auto fan on linux with awesome some i must use hiveos autofan setting to make that auto fan work

Can you manually set the fan speed via Awesome Miner (the GPU Clocking dialog)? Is it only the "Enable global fan speed" feature in the Options dialog, GPU settings section, that doesn't work?

ya it doesnt work... i must using hiveos autofan....

1) Can you please send me the Remote Agent log file via PM or e-mail (toolbar: Tools -> Log File -> Remote Agent)
2) Please also confirm if manual fan speed changes are working or not. This will be of help to understand if it's a problem with setting fan speed in general or if it's only the the global fan speed feature that isn't working.
Thanks!

ok i send you through email

[ralf007at]

Hi Patrike,

we installed the AM-Firmware for the S17+ - everything fine except 1 thing:
we set Target chip temperature to 80 (°C) but the Fan's run almost full speed and don't let the temperature going over 75...

BR Ralf

[SiddFan]

On-Line update does not work
"upgrades" back to 7.5.1

Can you please check if a reboot resolves this? Please see the post above for details:
https://bitcointalk.org/index.php?topic=676942.msg54231813#msg54231813

Did not solve the problem.. still on 7.5.1

[patrike]

Hi Patrike,

we installed the AM-Firmware for the S17+ - everything fine except 1 thing:
we set Target chip temperature to 80 (°C) but the Fan's run almost full speed and don't let the temperature going over 75...

BR Ralf

Thanks for the feedback Ralf. I will look into this scenario.

[patrike]

On-Line update does not work
"upgrades" back to 7.5.1

Can you please check if a reboot resolves this? Please see the post above for details:
https://bitcointalk.org/index.php?topic=676942.msg54231813#msg54231813

Did not solve the problem.. still on 7.5.1

Thanks for the update.

So when you download and run the 7.5.2 installer from our web site, you get all the installations dialogs and it looks fine during the installation, but once you launch Awesome Miner later on - it's still on the old version?
And a reboot doesn't resolve this?

[SiddFan]

On-Line update does not work
"upgrades" back to 7.5.1

Can you please check if a reboot resolves this? Please see the post above for details:
https://bitcointalk.org/index.php?topic=676942.msg54231813#msg54231813

Did not solve the problem.. still on 7.5.1

Thanks for the update.

So when you download and run the 7.5.2 installer from our web site, you get all the installations dialogs and it looks fine during the installation, but once you launch Awesome Miner later on - it's still on the old version?
And a reboot doesn't resolve this?

Instalation package from your site does not even want to install.. (will send you screenshots by e-mail)

[NCarter84]

How do you get profit information to show up for Tellor/TRB?

[mirny]

No Linux available?

[patrike]

How do you get profit information to show up for Tellor/TRB?

In most cases all popular coins are added to WhatToMine.com or CoinCalculators.io and these coins will automatically show up in Awesome Miner as well. Unfortunately this specific coin isn't listed yet.

[patrike]

No Linux available?

The Awesome Miner main application requires Windows, but you can run CPU and GPU mining on Linux. See:
https://support.awesomeminer.com/support/solutions/articles/35000086210-remote-agent-for-linux

[JFoxOne]

How do you get profit information to show up for Tellor/TRB?

In most cases all popular coins are added to WhatToMine.com or CoinCalculators.io and these coins will automatically show up in Awesome Miner as well. Unfortunately this specific coin isn't listed yet.

Feel free to use our Coin API from https://api.minerstat.com

[slysir]

Running Linux mining AM adds to Command line parameters:   --no-watchdog. How to remove "--no watchdog"

[patrike]

Running Linux mining AM adds to Command line parameters:   --no-watchdog. How to remove "--no watchdog"

Which mining software is it? NbMiner?

[patrike]

Hi Patrike,

we installed the AM-Firmware for the S17+ - everything fine except 1 thing:
we set Target chip temperature to 80 (°C) but the Fan's run almost full speed and don't let the temperature going over 75...

BR Ralf

Hi Ralf,

Can you please increase "Disable chains at CHIP temperature" (overheat feature) from the default 90 to 93 C for example. This will make the overheat temperature compared to the Target chip temperature more than 10 C and the fans will behave like you want.

[slysir]

Running Linux mining AM adds to Command line parameters:   --no-watchdog. How to remove "--no watchdog"

Which mining software is it? NbMiner?

yes...

[NCarter84]

How often does the software make backup of configuration? I made a bunch of changes tonight, had everything running.. Main system had a blip of power and now I'm back to where I started 3 hours ago.

[ralf007at]

Hi Patrike,

we installed the AM-Firmware for the S17+ - everything fine except 1 thing:
we set Target chip temperature to 80 (°C) but the Fan's run almost full speed and don't let the temperature going over 75...

BR Ralf

Hi Ralf,

Can you please increase "Disable chains at CHIP temperature" (overheat feature) from the default 90 to 93 C for example. This will make the overheat temperature compared to the Target chip temperature more than 10 C and the fans will behave like you want.

Hi Patrike,

thank you - that worked!

BR Ralf