[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[NCarter84]

Okay, here is a strange one. I've worked on it for a few hours and can't resolve.

I have 2 cards in a side rig. One 5700, one 4gb 470. For whatever reason, the 470 won't allocate the dag. It's not the monitor card, so I assume it's good. Any who, I decided to just throw it on Ubiq.

Pool set up for 5700, proto 1, gpus 1 - connects no problem.

Pool set for 470, proto 4, gpus 2. Won't connect to the pool. I check the epool file for that one and no proto is being passed. I've put it in the Phoenix/Claymore section, I've put it in the command line section. If i manually add proto 4 and save/close double click the miner it's all good. But it will not run as it through AM.

I'm currently mining on a pool that I don't want to mine to. Because it takes standard proto.

Any help or suggestions?

[1714654539]

1714654539

[1714654539]

1714654539

[1714654539]

1714654539

[1714654539]

1714654539

[ayiphelmy]

need a new update for raven kawpow algorithm.... I wish u can update before the fork

Thank you

[patrike]

once more looks like c32 profit is unrealistic both on nicehash and coin tab please check

Thanks

Nicehash CuckaToo32 is currently giving ~11 USD at 8H/s. That's about the same as Grin CuckaToo32 according to both WhatToMine and CoinCalculators.

need a new update for raven kawpow algorithm.... I wish u can update before the fork

Thank you

There are already a number of mining software included with Awesome Miner that supports Kawpow, like Gminer, Nbminer, TT-miner and T-rex miner. I'm about to add it for Nanominer as well.

I will keep an eye on that the algorithm is changed correctly for the actual RVN coin statistics as well.

[patrike]

Okay, here is a strange one. I've worked on it for a few hours and can't resolve.

I have 2 cards in a side rig. One 5700, one 4gb 470. For whatever reason, the 470 won't allocate the dag. It's not the monitor card, so I assume it's good. Any who, I decided to just throw it on Ubiq.

Pool set up for 5700, proto 1, gpus 1 - connects no problem.

Pool set for 470, proto 4, gpus 2. Won't connect to the pool. I check the epool file for that one and no proto is being passed. I've put it in the Phoenix/Claymore section, I've put it in the command line section. If i manually add proto 4 and save/close double click the miner it's all good. But it will not run as it through AM.

I'm currently mining on a pool that I don't want to mine to. Because it takes standard proto.

Any help or suggestions?

Hi,
Using the GPU with only 4 GB memory, did you get an error message about not enough memory to generate the DAG?

For Phoenix Miner I noticed that Awesome Miner didn't consider the PROTO property correctly for Ubiq. If the DAG size is the problem, please try with another EtHash based coin like EXP (Expanse).

[sxemini]

Okay, here is a strange one. I've worked on it for a few hours and can't resolve.

I have 2 cards in a side rig. One 5700, one 4gb 470. For whatever reason, the 470 won't allocate the dag. It's not the monitor card, so I assume it's good. Any who, I decided to just throw it on Ubiq.

Pool set up for 5700, proto 1, gpus 1 - connects no problem.

Pool set for 470, proto 4, gpus 2. Won't connect to the pool. I check the epool file for that one and no proto is being passed. I've put it in the Phoenix/Claymore section, I've put it in the command line section. If i manually add proto 4 and save/close double click the miner it's all good. But it will not run as it through AM.

I'm currently mining on a pool that I don't want to mine to. Because it takes standard proto.

Any help or suggestions?

Hi,
Using the GPU with only 4 GB memory, did you get an error message about not enough memory to generate the DAG?

For Phoenix Miner I noticed that Awesome Miner didn't consider the PROTO property correctly for Ubiq. If the DAG size is the problem, please try with another EtHash based coin like EXP (Expanse).

Try commandline option -rvram 1

[ayiphelmy]

once more looks like c32 profit is unrealistic both on nicehash and coin tab please check

Thanks

Nicehash CuckaToo32 is currently giving ~11 USD at 8H/s. That's about the same as Grin CuckaToo32 according to both WhatToMine and CoinCalculators.

need a new update for raven kawpow algorithm.... I wish u can update before the fork

Thank you

There are already a number of mining software included with Awesome Miner that supports Kawpow, like Gminer, Nbminer, TT-miner and T-rex miner. I'm about to add it for Nanominer as well.

I will keep an eye on that the algorithm is changed correctly for the actual RVN coin statistics as well.

ok nice but don't too late to update raven algo change.... so I don't need to add manually, with my hashrate real earning less $10 than awesome told in nicehash pool

[NCarter84]

Okay, here is a strange one. I've worked on it for a few hours and can't resolve.

I have 2 cards in a side rig. One 5700, one 4gb 470. For whatever reason, the 470 won't allocate the dag. It's not the monitor card, so I assume it's good. Any who, I decided to just throw it on Ubiq.

Pool set up for 5700, proto 1, gpus 1 - connects no problem.

Pool set for 470, proto 4, gpus 2. Won't connect to the pool. I check the epool file for that one and no proto is being passed. I've put it in the Phoenix/Claymore section, I've put it in the command line section. If i manually add proto 4 and save/close double click the miner it's all good. But it will not run as it through AM.

I'm currently mining on a pool that I don't want to mine to. Because it takes standard proto.

Any help or suggestions?

Hi,
Using the GPU with only 4 GB memory, did you get an error message about not enough memory to generate the DAG?

For Phoenix Miner I noticed that Awesome Miner didn't consider the PROTO property correctly for Ubiq. If the DAG size is the problem, please try with another EtHash based coin like EXP (Expanse).

Patrike - its funny you asked that... Short answer is yes.

Long answer is -- I Have a 5700XT 8 GB and 470 4 GB in this side rig.... I have a HDMI Dummy plug hooked up in the 5700xt and nothing hooked up to the 470.. Windows is allocating its memory on the 470 rather than the 5700. I checked HWinfo this AM and the 5700 had 2 MB of memory used, 470 at 450 mb of memory used (After stopping mining)

But even then, as you mentioned... Awesome Miner is failing to send over the correct Proto for this case. I've tried Nano Miner and haven't been able to get it to work correctly (IE: It uses the 5700xt, not just the 470) and it fails to log into the pool I've choosen.

[ralf007at]

Hi Patrik,

any idea when the AM-Firmware for the S17e and the T17e will be available?

BR Ralf

[Marvell2]

please Add kapowminer and update the raven couin settings to show kapow instead of x16r thanks!

[MoparMiningLLC]

anyways to get the temp that is reported for Futurebit miners in their gui to show in AM? It is doing the other stats, just not the temp as far as I can tell. This is true for the Gekkoscience Terminus R606 as well.

[sxemini]

please Add kapowminer and update the raven couin settings to show kapow instead of x16r thanks!

change ravencoin settings by yourself. changing algo to kawpow and thats it. don´t be lazy my friend.

[patrike]

please Add kapowminer and update the raven couin settings to show kapow instead of x16r thanks!

change ravencoin settings by yourself. changing algo to kawpow and thats it. don´t be lazy my friend.

About RVN: There will be a new Awesome Miner release available within the next 1 - 2 hours.

This version will include RVN Kawpow and this is where all coin statistics will be reported. The coin statistics may not be correct for some period of time after the fork and will depend on how fast WhatToMine and CoinCalculators reports the new stats. Once they report the correct stats, it will show up correctly in Awesome Miner as well.

If you have any existing Mining Pool defined with the coin RVN X16rv2, you may have to manually change it to RVN Kawpow.

There are already a number of mining software that supports Kawpow mining. They can already be accessed via the "Update mining software definitions" in the Awesome Miner menu and they will of course be included by default in the next release.

The following mining software supports Kawpow mining: Gminer, Z-enemy, Bminer, T-Rex, NbMiner, TT-miner, NanoMiner.

I've not looked into Kawpowminer yet so I cannot tell if it brings anything to the table other than a mining fee of 0%.

[patrike]

Okay, here is a strange one. I've worked on it for a few hours and can't resolve.

I have 2 cards in a side rig. One 5700, one 4gb 470. For whatever reason, the 470 won't allocate the dag. It's not the monitor card, so I assume it's good. Any who, I decided to just throw it on Ubiq.

Pool set up for 5700, proto 1, gpus 1 - connects no problem.

Pool set for 470, proto 4, gpus 2. Won't connect to the pool. I check the epool file for that one and no proto is being passed. I've put it in the Phoenix/Claymore section, I've put it in the command line section. If i manually add proto 4 and save/close double click the miner it's all good. But it will not run as it through AM.

I'm currently mining on a pool that I don't want to mine to. Because it takes standard proto.

Any help or suggestions?

Hi,
Using the GPU with only 4 GB memory, did you get an error message about not enough memory to generate the DAG?

For Phoenix Miner I noticed that Awesome Miner didn't consider the PROTO property correctly for Ubiq. If the DAG size is the problem, please try with another EtHash based coin like EXP (Expanse).

Patrike - its funny you asked that... Short answer is yes.

Long answer is -- I Have a 5700XT 8 GB and 470 4 GB in this side rig.... I have a HDMI Dummy plug hooked up in the 5700xt and nothing hooked up to the 470.. Windows is allocating its memory on the 470 rather than the 5700. I checked HWinfo this AM and the 5700 had 2 MB of memory used, 470 at 450 mb of memory used (After stopping mining)

But even then, as you mentioned... Awesome Miner is failing to send over the correct Proto for this case. I've tried Nano Miner and haven't been able to get it to work correctly (IE: It uses the 5700xt, not just the 470) and it fails to log into the pool I've choosen.

I've made a correction for the PROTO property for this scenario. It will soon be released.

In general, it's getting more difficult to use 4 GB cards as the DAG size requirements are increasing all the time. This is also why some coins work while other fail - the DAG size requirements are different.

[patrike]

Hi Patrik,

any idea when the AM-Firmware for the S17e and the T17e will be available?

BR Ralf

Hi Ralf,

Thansk for your question. The current plan is to have the Antminer S17e and T17e firmware available this month (May).

[patrike]

anyways to get the temp that is reported for Futurebit miners in their gui to show in AM? It is doing the other stats, just not the temp as far as I can tell. This is true for the Gekkoscience Terminus R606 as well.

It was probably close to a year since I looked into these miners last time, but back then they didn't report temperature over the monitoring interface (API). In the case of Terminus R606 it includes a Temperature property, but it's always zero. So although these miners may render the temperature in the web interface, they don't report it in the monitoring details.

It could be that something has improved in more recent firmware updates of these miners. If you want, please send me the API Reports (toolbar: Tools -> API Report) via PM or mail for these miners and I will investigate if there are any temperature details. Thanks!

[patrike]

Awesome Miner version 7.6

 ASIC mining
  - Fan speed display for BraiinsOS BOSminer
 GPU mining
  - Configuration of time span for mining process restart on frequent crashes. Configurable in the Options dialog, Mining Settings.
  - RVN coin prepared for Kawpow algorithm. Fork and algorithm change on May 6th, 18:00 GMT. Coin statistics may not be correct for some period of time after the fork.
 Features
  - Support for improved concurrency when using large scale mining operations. The concurrency level can now be increased to 200 in the Options dialog, Advanced section.
 User interface
  - Sorting of the Progress column can sort on the value displayed as part of a custom expression
 Integration
  - Updated Ethereum, Verge and Bitcoin Cash block explorers for wallet balance
 Mining software
  - NanoMiner 1.9.1
  - T-Rex miner 1.15.4
  - NbMiner 30.2
  - WildRig Miner 0.20.6
  - Z-enemy Miner 2.5
  - Bminer 16.2
 Corrections
  - Correction to the PROTO parameter for Phoenix Miner when mining UBQ

[MoparMiningLLC]

anyways to get the temp that is reported for Futurebit miners in their gui to show in AM? It is doing the other stats, just not the temp as far as I can tell. This is true for the Gekkoscience Terminus R606 as well.

It was probably close to a year since I looked into these miners last time, but back then they didn't report temperature over the monitoring interface (API). In the case of Terminus R606 it includes a Temperature property, but it's always zero. So although these miners may render the temperature in the web interface, they don't report it in the monitoring details.

It could be that something has improved in more recent firmware updates of these miners. If you want, please send me the API Reports (toolbar: Tools -> API Report) via PM or mail for these miners and I will investigate if there are any temperature details. Thanks!

will do tonight! thanks. if its not reporting it over the API then that would be something to take up with the manufacturers right?

[boki019]

So where is Raven now ? Dont have it in COINS.....
It was there all this time, now on 7.6 i dont have it

[ayiphelmy]

kawpow cant run on awesome whatever miner software I use how come?

[patrike]

So where is Raven now ? Dont have it in COINS.....
It was there all this time, now on 7.6 i dont have it

I noticed RVN was removed from the WhatToMine main listing, but still possible to access with a small update. Your Awesome Miner will automatically resolve this within the next few hours but you can force the update right away:

1) Click on the blue Menu button in Awesome Miner
2) Click on "Update Mining Software Definitions". Even if no software updates are found, it will also refresh some cloud settings like what specific WhatToMine coins to always include
3) Go to the Coins tab and click the Refresh button.

Now you should see Ravencoin Kawpow in the list.