[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[sxemini]

Hello!

How do I make Awesome Miner detect that Claymore doesn't initialize?

I have a few nasty rigs that may sometimes not initialize properly and Claymore either throws "Miner cannot initialize for 5 minutes, need to restart miner!" error (and freezes) or just stops at GPU initialization.

I don't have enough time right now to deal with these rigs, so I just want AM to detect such behavior and restart the rig using "shutdown -f -r -t 0" because if such a thing happens, only a full reboot helps.

Which rule shall I create for this situation?

And a feature request: sometimes GPUs fall of the bus and are not detected. Right now I have to set up a rule per each farm that detects a number of devices and if it's not the same as specified in the rule, the notification is displayed.

But maybe it is possible to be able to set up a GPU count in the Properties of each rig? Because right now I need to create 50+ rules for each rig.

1) The built-in Offline Detection rule should be able to detect this. By default the rule only provides a notification, but you can modify it to also take an action like reboot. The action name is "Miner command" for this, where you will find Reboot as one of the optioins.

Do you see the notification message when Claymore miner ends up in this state?

2) Good point about specifying a GPU count on the miner. Thanks!

No, the deal is that this state doesn't trigger any notifications.

Just to confirm - in the Options dialog, Rules section, you have enabled (checked the check box) the predefined rule called "Offline Detection"? Even when enabled, you don't get any notification?

The miner doesn't go offline. It stays online.
http://i.piccy.info/i9/081cf6b9fd441f660ec8dda024132959/1590617631/134093/1380548/fail.png

See the screen. It's not mine, but I get the same error: the miner just hangs on this screen and that's all.
So it is considered as "Online" and "Mining" in AM.

Which rule do I need to create to detect such a situation and execute a reboot?

Accepted shares doesn't increase after x mins?

You have screen or hdmi dummy in the rig? I think this is the problem why it not initialize.
If Claymore not initialize, then you should solve this problem, because this is not normal.

[patrike]

Awesome Miner version 7.7.2

Version 7.7.2
 IMPORTANT: Future versions of Awesome Miner and Remote Agent will require Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer 
 GPU mining
   - Improved Device Count trigger. A Managed Miner (and Managed Profit Miner) can be configured for an expected number of mining devices (GPUs, CPUs) in the Properties, Advanced section, of the miner. The Device Count trigger can be configured to trigger if the number of reported mining devices are less than expected.
   - Diagnostics improved to detect and display additional Visual C++ runtime versions installed
 Features
  - New rule trigger for system uptime
  - Rules can be configured to limit the number of executions per day
  - The Information column can be configured to display the revenue and profit in BTC per day, no matter which primary display currency is being used.
  - The Information column can be configured to display number of mining devices
 User interface
  - Operations to expand all and collapse all miner groups
 Mining software
  - PhoenixMiner 5.0b
  - Bminer 16.2.1
  - T-Rex Miner 0.15.7
  - XmRig miner 5.11.2
  - TeamRedMiner 0.7.3
 Corrections
  - Correction to profit switcher calculations for Luxor Equihash pool
  - Correction to WildRig running on Linux

[zloyneo]

patrike


Why is fan control and voltage on AMD cards not used with Awesome linux agent ?

[SCMining]

Hi

Since this update a lot of my rigs are no longer reporting power in the AM console but I see it in the mining software on the rig. I've checked "winver" and rigs are 1809 or above. Thoughts?

Awesome Miner version 7.7.2

Version 7.7.2
 IMPORTANT: Future versions of Awesome Miner and Remote Agent will require Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer 
 GPU mining
   - Improved Device Count trigger. A Managed Miner (and Managed Profit Miner) can be configured for an expected number of mining devices (GPUs, CPUs) in the Properties, Advanced section, of the miner. The Device Count trigger can be configured to trigger if the number of reported mining devices are less than expected.
   - Diagnostics improved to detect and display additional Visual C++ runtime versions installed
 Features
  - New rule trigger for system uptime
  - Rules can be configured to limit the number of executions per day
  - The Information column can be configured to display the revenue and profit in BTC per day, no matter which primary display currency is being used.
  - The Information column can be configured to display number of mining devices
 User interface
  - Operations to expand all and collapse all miner groups
 Mining software
  - PhoenixMiner 5.0b
  - Bminer 16.2.1
  - T-Rex Miner 0.15.7
  - XmRig miner 5.11.2
  - TeamRedMiner 0.7.3
 Corrections
  - Correction to profit switcher calculations for Luxor Equihash pool
  - Correction to WildRig running on Linux

[patrike]

patrike

Why is fan control and voltage on AMD cards not used with Awesome linux agent ?

In general it should be possible to set fan and voltage for AMD on Linux. Please let me know which AMD GPUs you are running and what kind of Linux environment/drivers you use. Thanks!

[patrike]

Have you antminer S19 pro custom firmware?

Thanks for your question. We will soon release firmware for Antminer S19 and S19 Pro.

[patrike]

Hi

Since this update a lot of my rigs are no longer reporting power in the AM console but I see it in the mining software on the rig. I've checked "winver" and rigs are 1809 or above. Thoughts?

Awesome Miner version 7.7.2

Version 7.7.2
 IMPORTANT: Future versions of Awesome Miner and Remote Agent will require Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer  

Thanks for the report.

There are no changes in the latest version (v7.2.2) of Awesome Miner related to .NET Framework or Windows version requirements. The release notes only indicates what to expect in a few weeks from now.

1) Power Usage monitoring is based on nVidia NVML. When you run into this problem, could you please select the miner and click on the System tab in the lower part of the screen. Then click on "Reinitialize monitoring".

2) If the above didn't resolve the problem, please go to the GPU tab for this miner and click "View GPU details". Please send the output to me via PM or mail. Thanks!

[SCMining]

"Reinitialize monitoring" fixed it. TYVM for the fast response.

Would not manage my remote farm without AM.

Thanks again

Hi

Since this update a lot of my rigs are no longer reporting power in the AM console but I see it in the mining software on the rig. I've checked "winver" and rigs are 1809 or above. Thoughts?

Awesome Miner version 7.7.2

Version 7.7.2
 IMPORTANT: Future versions of Awesome Miner and Remote Agent will require Microsoft .NET Framework 4.7.2 or later.
   - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required.
   - For Windows 7, Windows 8 and older versions of Windows 10, please download and install:
     https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer  

Thanks for the report.

There are no changes in the latest version (v7.2.2) of Awesome Miner related to .NET Framework or Windows version requirements. The release notes only indicates what to expect in a few weeks from now.

1) Power Usage monitoring is based on nVidia NVML. When you run into this problem, could you please select the miner and click on the System tab in the lower part of the screen. Then click on "Reinitialize monitoring".

2) If the above didn't resolve the problem, please go to the GPU tab for this miner and click "View GPU details". Please send the output to me via PM or mail. Thanks!

[patrike]

Awesome Miner version 7.7.3

 ASIC mining
  - Pool changes supported for Antminers running BraiinsOS BOSminer
 Features
  - Rule variables via Check Variable trigger and Set Variable action. Can for example be used as counters for how many times a rule has been executed for a specific miner.
  - Rule action to move miners to miner group
  - Tag filtering can be set to Inverted mode, to show all miners that don't meet the filter criteria
 User interface
  - Miner list can be sorted by average hashrate
 Mining software
  - SrbMiner 0.4.5
 Corrections
  - Correction to sorting by time in the list of notifications for a specific miner

[GKumaran]

In the progress column,

Coin per day -> miningHelper.GetCoinsPerDay()

Is there a way to get the Bitcoin per day using 'miningHelper.GetBitcoinPerDay()'

[patrike]

In the progress column,

Coin per day -> miningHelper.GetCoinsPerDay()

Is there a way to get the Bitcoin per day using 'miningHelper.GetBitcoinPerDay()'

If you use the Information column (toolbar: Appearance -> Information column), you can select to include "Revenue per day (BTC/day)".

Please let me know if you need it in the progress column as well.

[patrike]

Awesome Miner version 7.7.4

 Awesome Miner Antminer firmware
  - The ASIC tab displays the ideal hashrate per device
 ASIC mining:
  - The ASIC tab displays the fan speed in a separate column
 Rules
  - The trigger for Miner State includes additional disconnected stats to consider
 Mining software
  - XmRig Miner 6.2
  - Wildrig Miner 0.25.1
  - Gminer 2.10
  - TeamRedMiner 0.7.5
  - CpuMiner-Opt 3.14.2
  - SrbMiner 0.4.6
  - PhoenixMiner 5.0e

[GKumaran]

In the progress column,

Coin per day -> miningHelper.GetCoinsPerDay()

Is there a way to get the Bitcoin per day using 'miningHelper.GetBitcoinPerDay()'

If you use the Information column (toolbar: Appearance -> Information column), you can select to include "Revenue per day (BTC/day)".

Please let me know if you need it in the progress column as well.

My setup :
Progress Column:
1. Accepted%, Rejected%, HW Error%
2. Accepted, Rejected, HW Error
3. Coin/Watt, BTC/Watt

Information Column:
1. BTC/Day (Rev)
2. BTC/Day (Prof)
3. Coin/Day

If i can have the BTC/Day in progress column, then i can track BTC/Watt across multiple devices

[patrike]

In the progress column,

Coin per day -> miningHelper.GetCoinsPerDay()

Is there a way to get the Bitcoin per day using 'miningHelper.GetBitcoinPerDay()'

If you use the Information column (toolbar: Appearance -> Information column), you can select to include "Revenue per day (BTC/day)".

Please let me know if you need it in the progress column as well.

My setup :
Progress Column:
1. Accepted%, Rejected%, HW Error%
2. Accepted, Rejected, HW Error
3. Coin/Watt, BTC/Watt

Information Column:
1. BTC/Day (Rev)
2. BTC/Day (Prof)
3. Coin/Day

If i can have the BTC/Day in progress column, then i can track BTC/Watt across multiple devices

Thanks for the details. The next release will support:
miningHelper.GetBtcPerDay()

[GKumaran]

Is the AM Webhook compatitble with Discord webhook intergration?

[patrike]

Is the AM Webhook compatitble with Discord webhook intergration?

Thanks for your question.

Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it.

[GKumaran]

Is the AM Webhook compatitble with Discord webhook intergration?

Thanks for your question.

Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it.

The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications.

[patrike]

Is the AM Webhook compatitble with Discord webhook intergration?

Thanks for your question.

Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it.

The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications.

Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination.

There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent.

[sxemini]

Is the AM Webhook compatitble with Discord webhook intergration?

Thanks for your question.

Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it.

The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications.

Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination.

There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent.

I tried, but AM send no webhook to Discord. I test it with a normal rule and a rule with activation via action toolbar.

[patrike]

Is the AM Webhook compatitble with Discord webhook intergration?

Thanks for your question.

Webhooks are used to send out HTTP requests. Both Awesome Miner and Discord can send out these kind of HTTP requests. There are however no feature in Awesome Miner to receive incoming HTTP requests - so if Discord sends out something - Awesome Miner will not be able to receive it.

The Discord HTTP (Post) webhooks are a service to service to recevice the webhook and post the update to a discord channel. Please let me know how to send from AM and receive in Discord. Ive setup the channel and added the AM webhook url to discord, but am not able to get the notifications.

Thanks for the clarification. If Discord provides an endpoint where you can point external webhooks - it should be possible for Awesome Miner to send a webhook HTTP Post to this destination.

There is a rule action in Awesome Miner called "Send webhook request". You can enter the target URL (where Discord is listening to incoming requests), select POST as HTTP method, and then fill in the POST body. The POST body is likely a JSON structure with the properties that Discord expects according to their documentation. From an Awesome Miner point of view - it's just some text to be sent.

I tried, but AM send no webhook to Discord. I test it with a normal rule and a rule with activation via action toolbar.

Please open the Awesome Miner log file (toolbar: Tools -> Log File). Search for "Sending Webhook". If Awesome Miner sends the HTTP request, you should be able to see the URL it's being sent to. In case of connection failure, it should be logged as an exception.