narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
September 30, 2020, 01:07:09 PM |
|
Hi Patrike found some small bugs: Prefiks for MiningPoolHub for algo Ethash default value must be changeg from stratum+tcp:// to startum2+tcp:// (can be changed manualy in "Online Services" section) unable connect with NBMiner to MiningPoolHub Ethash, due wrong protocol prefiks. NBminer use ethproxy+tcp://, but must be startum2+tcp:// (I dont understand why NBMiner ignore prefiks value from "Online Services" where i have manually changed to startum2+tcp:// )
regards
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
September 30, 2020, 02:01:56 PM |
|
Patrike, you need implement a download queue for mining software after AM upgrading. If user have a lot of miners and rigs on the LTE network and all this rigs want download software at the same time, its come to huge mining downtime. Regards
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
Binary100100
Member
Offline
Activity: 180
Merit: 10
|
|
September 30, 2020, 04:58:01 PM |
|
Hi Patrike found some small bugs: Prefiks for MiningPoolHub for algo Ethash default value must be changeg from stratum+tcp:// to startum2+tcp:// (can be changed manualy in "Online Services" section) unable connect with NBMiner to MiningPoolHub Ethash, due wrong protocol prefiks. NBminer use ethproxy+tcp://, but must be startum2+tcp:// (I dont understand why NBMiner ignore prefiks value from "Online Services" where i have manually changed to startum2+tcp:// )
regards
Hmm. I'm using MiningPoolHub mining Eth at this very moment. I haven't had any issues (yet.) I'll refer to this if I do though. Thanks! The only issue that I discovered is that I set the port for mining ETC and it still mines ETH. That's probably a MiningPoolHub issue though, not an AM issue.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 30, 2020, 05:52:08 PM |
|
Hi Patrike found some small bugs: Prefiks for MiningPoolHub for algo Ethash default value must be changeg from stratum+tcp:// to startum2+tcp:// (can be changed manualy in "Online Services" section) unable connect with NBMiner to MiningPoolHub Ethash, due wrong protocol prefiks. NBminer use ethproxy+tcp://, but must be startum2+tcp:// (I dont understand why NBMiner ignore prefiks value from "Online Services" where i have manually changed to startum2+tcp:// )
regards
Right now ethproxy is enforced as it works for most pools, but I agree this is incorrect behavior. If you define you custom protocol, that one should be used instead. However, If I'm setting the protocol to stratum2+tcp:// for NbMiner, it will not start. Error format URL: stratum2+tcp://europe.ethash-hub.miningpoolhub.com:20535
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
cylshan
Newbie
Offline
Activity: 18
Merit: 0
|
|
October 01, 2020, 02:10:47 AM |
|
Can you write detailed instructions on how to install on top of HiveOS - Awesome Miner?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 01, 2020, 10:53:51 AM |
|
Awesome Miner version 8.1
Features - Quick filter box in the Find toolbar to find miner or miners by IP address or description - Miner property filter for IP address or description - Heat map: Filtering for list of miners - Heat map: The dialog for configuring the heat map size also includes a setting if the column and row headers should be displayed - Heat map: Web interface support - Heat map: General improvements - Improved sorting of miners in the list of available miners for a heat map - The information column can display the MAC address of a miner - Proft Profile can be configured to run mining software with administrator privileges, configurable per algorithm - Introduce varable [tags] to get a comma separated list of all tags for a miner Integration - Wallet balance feature can be configured to send custom HTTP headers when requesting balance from a block explorer Changes - External Miners in Disabled state will no longer consume a license - Introduce a one second delay when making multiple calls to the same block explorer for wallet balance of multiple addresses Mining software - SrbMiner 0.5.2, including support for more algorithms - T-Rex 0.17.3, including support for Nicehash pool Ethereum mining and use of PCI Bus ID device order - NbMiner 32.0, including more fleixble support for specifying pool protocol for Ethereum - WildRig 0.27.5 - XmRig 6.3.4 - Gminer 2.26 - TeamRedMiner 0.7.11 - Nanominer 1.11.0 - Bminer 16.3.1 Corrections - Correction to Zergpool region URLs - Correction to Graviex exchange balance - Correction to list of groups when moving miners in web interface - Correction to tooltip display for miners in the heat map
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 01, 2020, 11:01:05 AM |
|
Can you write detailed instructions on how to install on top of HiveOS - Awesome Miner?
Please see this guide as a starting point: https://support.awesomeminer.com/support/solutions/articles/35000086210-remote-agent-for-linux
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
cylshan
Newbie
Offline
Activity: 18
Merit: 0
|
|
October 01, 2020, 02:07:45 PM Last edit: October 01, 2020, 07:13:01 PM by cylshan |
|
That's just the point, I installed the hiveos version hiveos-beta-0.6-157@200909 under 5700, I go over the local network to the rig via PuTTY, I connect, through the console I enter in order: wget http://www.awesomeminer.com/download/setup/awesomeminer-remoteagent.tar.xztar xvJf awesomeminer-remoteagent.tar.xz cd awesomeminer-remoteagent sudo ./service-install.sh ./AwesomeMiner.RemoteAgent.Linux sudo ./service-install.sh ./service-start.sh I see an active one in the console, I go AM, I find it, I connect, then in the AM window the service is offline. It seems to be connected, but it does not work https://ibb.co/VHpqqH1
|
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
October 01, 2020, 07:51:00 PM |
|
after installing of Am on Hive, run this command: ldconfig /hive/lib/ otherwise not all miners will work properly
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
October 01, 2020, 09:39:50 PM Last edit: October 01, 2020, 10:12:03 PM by joseph32 |
|
Hi Patrik,
I think I found a bug in the new admin privileges.
I had the admin privileges in the "Properties" before. After the newest update 8.1, I deactivated it in the "Properties" and activated it directly in the "Profit Profile". On most miners it works perfectly. But on one miner it will not save the unchecked box in the "Properties".
If I uncheck it and close AM, after starting AM again its still checked. If I start AM in administrator mode, uncheck it, close AM and restart it again in administrator mode, it is unchecked (sometimes, not always). But if I close AM and start it in normal mode, it is checked again. Even if I just stop/start the miner or after a few minutes running, it will switch from uncheck to checked. No matter what I try, it wont be saved forever, but only on this one miner. Do you have an idea what could be the reason or what I can do to finally deactivate it in the "Properties"?
EDIT: I also tried to delete the ConfigData.xml.bck and tmp before, between and after closing/restarting AM, it doesnt helped. Still the same bug.
Thank you!
|
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
October 02, 2020, 08:55:53 AM Last edit: October 02, 2020, 09:34:42 AM by narousberg |
|
Small quide how to prepare & configure HiveOS USB stick and AwesomeMiner: configure BIOS of your rig to use extern GPU as primary video output put USB stick with fresh HIveOS installation in your mining rig. connect hdmi monitor to GPU which is connected to main PCE slot switch on rig power after HiveOS loaded do following commands: hivepasswd somepassword diskexpand selfupgrade wget http://www.awesomeminer.com/download/setup/awesomeminer-remoteagent.tar.xztar xvJf awesomeminer-remoteagent.tar.xz cd awesomeminer-remoteagent sudo ./service-install.sh ldconfig /hive/lib/ now you can access your rig linux console from remote computer over: ssh user@yourRigIP you can install a new NVIDIA driver. (preffered) This upgrade you must do over remote console! Login to rig over ssh and do this commands: logs-on reboot after rebooting: cd awesomeminer-remoteagent *stop* killall xinit nvidia-driver-update after driver installation complete (need some time) do this commands: logs-off reboot now you can use HiveOS+AM together P.S. Very important! Do not assign any flightsheets or set any watchdogs, autofan, overclocks in Hive Web interface for this rig. This will cause a conflict between AM and Hive! Only put rig.conf file on USB stcik (Better if you simple create a fresh rig instance on Hive website for this setup) All what we need from Hive is only configured Linux and cuda libs, nothing more. AM remote agent will do the rest. Enjoy. He-he, i see you use AMD cards, then you can skip a step with NVDIA driver update. I see you have installed AM remote agent. If you cant connect to rig over AM, then check: If you marked in AM the rig host as a Linux host check windows firewall
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
October 02, 2020, 01:48:37 PM |
|
@Patrike
please add default params for Lolminer for Cortex algorithm: C30CTX
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 02, 2020, 04:57:04 PM |
|
If I uncheck it and close AM, after starting AM again its still checked.
Hi and thanks for the feedback. When the profit switcher is running, it will check the Profit Profile for this Managed Profit Miner and adjust the Admin-property based on how the most profitable algorithm is configured (in the Profit Profile, Algorithm specific settings). So if the Managed Profit Miner Properties dialog is showing the Admin-property being checked - is the related Profit Profile configured to update the Admin-property for any of the algorithms? I assume that if you manually make a change to the Admin-property on the Managed Profit Miner and save/close the dialog, it looks fine if you re-open the dialog again right away? However, if you wait for a while and let the profit switcher make a decision for the miner, it will change based on how the Profit Profile is configured for the specific algorithm. Does this match what happens? If not, please let me know if I misunderstood your question.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 02, 2020, 05:47:42 PM |
|
@Patrike
please add default params for Lolminer for Cortex algorithm: C30CTX
Yes, done!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
October 02, 2020, 06:11:50 PM |
|
8.1.0 is broken - cant install, shows error something about cant start service. Worst thing - it removed previous perfectly working version.
|
|
|
|
joseph32
Member
Offline
Activity: 418
Merit: 21
|
|
October 02, 2020, 10:04:09 PM |
|
If I uncheck it and close AM, after starting AM again its still checked.
Hi and thanks for the feedback. When the profit switcher is running, it will check the Profit Profile for this Managed Profit Miner and adjust the Admin-property based on how the most profitable algorithm is configured (in the Profit Profile, Algorithm specific settings). So if the Managed Profit Miner Properties dialog is showing the Admin-property being checked - is the related Profit Profile configured to update the Admin-property for any of the algorithms? I assume that if you manually make a change to the Admin-property on the Managed Profit Miner and save/close the dialog, it looks fine if you re-open the dialog again right away? However, if you wait for a while and let the profit switcher make a decision for the miner, it will change based on how the Profit Profile is configured for the specific algorithm. Does this match what happens? If not, please let me know if I misunderstood your question. Ah, now I get it. If the override in the "Profit Profile" trigger the admin privileges, it markes also the admin privileges in the "Properties". If it switches to another coin without the override, it also unchecks the admin privileges in the "Properties". So not a bug, its a feature
|
|
|
|
final war
Newbie
Offline
Activity: 47
Merit: 0
|
|
October 02, 2020, 11:12:29 PM |
|
Small quide how to prepare & configure HiveOS USB stick and AwesomeMiner: configure BIOS of your rig to use extern GPU as primary video output put USB stick with fresh HIveOS installation in your mining rig. connect hdmi monitor to GPU which is connected to main PCE slot switch on rig power after HiveOS loaded do following commands: hivepasswd somepassword diskexpand selfupgrade wget http://www.awesomeminer.com/download/setup/awesomeminer-remoteagent.tar.xztar xvJf awesomeminer-remoteagent.tar.xz cd awesomeminer-remoteagent sudo ./service-install.sh ldconfig /hive/lib/ now you can access your rig linux console from remote computer over: ssh user@yourRigIP you can install a new NVIDIA driver. (preffered) This upgrade you must do over remote console! Login to rig over ssh and do this commands: logs-on reboot after rebooting: cd awesomeminer-remoteagent *stop* killall xinit nvidia-driver-update after driver installation complete (need some time) do this commands: logs-off reboot now you can use HiveOS+AM together P.S. Very important! Do not assign any flightsheets or set any watchdogs, autofan, overclocks in Hive Web interface for this rig. This will cause a conflict between AM and Hive! Only put rig.conf file on USB stcik (Better if you simple create a fresh rig instance on Hive website for this setup) All what we need from Hive is only configured Linux and cuda libs, nothing more. AM remote agent will do the rest. Enjoy. He-he, i see you use AMD cards, then you can skip a step with NVDIA driver update. I see you have installed AM remote agent. If you cant connect to rig over AM, then check: If you marked in AM the rig host as a Linux host check windows firewall seems like i am unable to OC the gpus i get a error : unable to read GPU information any tips?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 03, 2020, 07:00:21 AM |
|
8.1.0 is broken - cant install, shows error something about cant start service. Worst thing - it removed previous perfectly working version.
Thanks for your question. It might be that you don't have a recent version of the Microsoft .NET Framework installed on your computer. Awesome Miner and Remote Agent version 8.x requires Microsoft .NET Framework 4.7.2 or later. - This .NET version is already included in Windows 10 since April 2018. Run 'winver' to check the current Windows 10 version. If the version is 1803 or above, all is fine and no action is required. - For Windows 7, Windows 8 and older versions of Windows 10 and Windows Server, please download and install: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installerWhich version of Awesome Miner did you run before the upgrade?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
October 03, 2020, 07:02:17 AM |
|
If I uncheck it and close AM, after starting AM again its still checked.
Hi and thanks for the feedback. When the profit switcher is running, it will check the Profit Profile for this Managed Profit Miner and adjust the Admin-property based on how the most profitable algorithm is configured (in the Profit Profile, Algorithm specific settings). So if the Managed Profit Miner Properties dialog is showing the Admin-property being checked - is the related Profit Profile configured to update the Admin-property for any of the algorithms? I assume that if you manually make a change to the Admin-property on the Managed Profit Miner and save/close the dialog, it looks fine if you re-open the dialog again right away? However, if you wait for a while and let the profit switcher make a decision for the miner, it will change based on how the Profit Profile is configured for the specific algorithm. Does this match what happens? If not, please let me know if I misunderstood your question. Ah, now I get it. If the override in the "Profit Profile" trigger the admin privileges, it markes also the admin privileges in the "Properties". If it switches to another coin without the override, it also unchecks the admin privileges in the "Properties". So not a bug, its a feature Yes, but I'm still interested in your feedback here as I want to make sure the concept is usable. The goal was to have a way where only specific algorithms will run with Admin-permissions, while other algorithms will not.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|