sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
January 04, 2021, 09:13:25 PM |
|
Hi Patrike,
something is wrong with the QKC calculation.
Example:
AM says around 100 coins and around 0,45€ a day at 24.3mh Whattomine says around 42 coins and 0,21€ a day at 24.3mh
I will look into this one. Awesome Miner matches what CoinCalculators.io indicate on their web site, but not WhatToMine.com. Same Ycash
AM says with 8 H/s around 92€ daily I setup Ycash as new coin by myself and there i get the right result 8 H/s and 0,27€
Ycash is currently not listed, as it isn't included by WhatToMine and CoinCalculators.io anymore. Awesome Miner will currently not automatically update this coin for you. Verushash has wrong block reward (down to 12 from 24). Are your Coin properties dynamic or static and you change everything by yourself?
Verushash is removed from the WhatToMine main listing, so Awesome Miner will not automatically pick up the changes at the moment. You can manually add it as a custom JSON url in the Options dialog, Statistics provider section: https://whattomine.com/coins/333.jsonAwesome Miner is automatically reading the coin properties for all coins part of the main listings at WhatToMine.com and CoinCalculators.io. In some cases I need to make adjustments as the Ok thanks. Quarkchain is wrong calculated by CoinCalutators.io, whattomine calculate it right. I tested it with 1 GPU. Yeah adding coins is no problem for me I see a big problem with Coincalculators in the future if they not clean there coins. They have so many wrong informations for coins, they support dead and scam coins also.
|
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
January 06, 2021, 01:06:01 PM |
|
Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
January 06, 2021, 01:49:56 PM |
|
Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
you don´t need any api for eth, only your address, patrike has set the api for eth. this is set as default https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance so for what you need another api???
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 06, 2021, 03:19:54 PM |
|
Awesome Miner version 8.2
ASIC mining - Improved API compatibility with custom Antminer firmware GPU mining - Managed Software (in the Options dialog) can be customized for Linux Features - Show hashrate and temperature graph in the details panel for the selected miner - Introducing the concept of Quick Access Toolbar, where you can right click on almost any toolbar button or sub menu item in the main window and add it to the Quick Access Toolbar. The command will show up as a separate button in the top left corner of the main window. - The highlight colors currently named Information 1, Information 2 and so on can be given a user defined description. To define a description, use the 'Rename' menu item in the Highlight Miners or Highlight Groups toolbar buttons. - The Information column can be configured to display the hashrate of each individual device for a miner - The profit switching setting for minimum time to say on a pool can now be configured for up to 999 minutes. - Led flash support for Antminer S15, T15, S17 and T17 running Bitmain firmware Integration - Ethermine pool balance Improvements - Improved sorting for the Information column - Updated default list of mining software for AMD and nVidia Profit Profiles Mining software - SrbMiner 0.6.2 - Gminer 2.40 - XmRig 6.7 - T-Rex miner 0.19.5 - NbMiner 36.0 - Bminer 16.4.2 - TeamRedMiner 0.7.22 - CpuMiner-Opt 3.15.5 - PhoenixMiner 5.4c - Lolminer 1.17 Corrections - Correction to the link to the Nicehash web site - Correction to Nanominer VerusHash device reporting - Changed timeout for reboot of Antminer S19 - Correction to AMD RX 5000 series overclocking on Linux
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
narousberg
Legendary
Offline
Activity: 1753
Merit: 1007
|
|
January 06, 2021, 09:43:21 PM |
|
Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
you don´t need any api for eth, only your address, patrike has set the api for eth. this is set as default https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance so for what you need another api?? this default api call not work
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
January 07, 2021, 10:35:30 AM Last edit: January 07, 2021, 11:35:04 AM by sxemini |
|
Awesome Miner version 8.2
ASIC mining - Improved API compatibility with custom Antminer firmware GPU mining - Managed Software (in the Options dialog) can be customized for Linux Features - Show hashrate and temperature graph in the details panel for the selected miner - Introducing the concept of Quick Access Toolbar, where you can right click on almost any toolbar button or sub menu item in the main window and add it to the Quick Access Toolbar. The command will show up as a separate button in the top left corner of the main window. - The highlight colors currently named Information 1, Information 2 and so on can be given a user defined description. To define a description, use the 'Rename' menu item in the Highlight Miners or Highlight Groups toolbar buttons. - The Information column can be configured to display the hashrate of each individual device for a miner - The profit switching setting for minimum time to say on a pool can now be configured for up to 999 minutes. - Led flash support for Antminer S15, T15, S17 and T17 running Bitmain firmware Integration - Ethermine pool balance Improvements - Improved sorting for the Information column - Updated default list of mining software for AMD and nVidia Profit Profiles Mining software - SrbMiner 0.6.2 - Gminer 2.40 - XmRig 6.7 - T-Rex miner 0.19.5 - NbMiner 36.0 - Bminer 16.4.2 - TeamRedMiner 0.7.22 - CpuMiner-Opt 3.15.5 - PhoenixMiner 5.4c - Lolminer 1.17 Corrections - Correction to the link to the Nicehash web site - Correction to Nanominer VerusHash device reporting - Changed timeout for reboot of Antminer S19 - Correction to AMD RX 5000 series overclocking on Linux
Thanks for this update. I found a bug in Ethermine Pool Balance for ETC, AM recognize it as BTC and show Update failed. ETH Pool balance for Ethermine work. Do you plan to add flypool balance as well? Flypool is a part of ethermine. Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
you don´t need any api for eth, only your address, patrike has set the api for eth. this is set as default https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance so for what you need another api?? this default api call not work Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
you don´t need any api for eth, only your address, patrike has set the api for eth. this is set as default https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance so for what you need another api?? this default api call not work It works! When it not work, why i get the balance? So i think the failure is at your system. Or you will try to get the balance of your exchange wallet, this is not possible on most exchanges. If you not believe, test it in your browser dude and you will see that it works.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 07, 2021, 01:55:52 PM |
|
Thanks for this update. I found a bug in Ethermine Pool Balance for ETC, AM recognize it as BTC and show Update failed. ETH Pool balance for Ethermine work. Do you plan to add flypool balance as well? Flypool is a part of ethermine.
Thanks for the feedback. I will add support for Ethermine ETC and Flypool ZEC in the next update.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 07, 2021, 01:58:40 PM |
|
Hi guys, anyone know how to setup viewing ETH wallet balance in AM. What a API you use? Thanks
you don´t need any api for eth, only your address, patrike has set the api for eth. this is set as default https://api.blockcypher.com/v1/eth/main/addrs/[address]/balance so for what you need another api?? this default api call not work It works fine for Ethereum wallet balance when I'm testing it. Can you please open the URL in the web browser like sxemini suggested? If you get any response here with a balance that Awesome Miner should be able to display, please let me know your Ethereum wallet address and I will try to reproduce the problem.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
forato
|
|
January 07, 2021, 05:46:07 PM |
|
Hello, On my farm I Have GPU's and ASIC's.
My license: Your current license: Professional Edition (10 miners)
On my ASIC's I have the AM firmware (LTC's ASIC's)
On your website it is saying:
Mining fee The firmware has a mining fee of either 2% or 3% (on average a bit lower, about 1.8% and 2.8%) The mining fee is based on a parallel mining concept to avoid any interruptions to the normal mining The firmware with a 3% mining fee includes an Awesome Miner license and doesn't consume any of the licenses available in Awesome Miner. This makes it possible to run Awesome Miner and Cloud Services without paying anything for the license as long as the firmware with a 3% mining fee is being used.
But I am tryng to acces cloud services and it is saying that I don't have the subscription plan..
How Can I solve this?
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
January 07, 2021, 07:25:38 PM |
|
Hello, On my farm I Have GPU's and ASIC's.
My license: Your current license: Professional Edition (10 miners)
On my ASIC's I have the AM firmware (LTC's ASIC's)
On your website it is saying:
Mining fee The firmware has a mining fee of either 2% or 3% (on average a bit lower, about 1.8% and 2.8%) The mining fee is based on a parallel mining concept to avoid any interruptions to the normal mining The firmware with a 3% mining fee includes an Awesome Miner license and doesn't consume any of the licenses available in Awesome Miner. This makes it possible to run Awesome Miner and Cloud Services without paying anything for the license as long as the firmware with a 3% mining fee is being used.
But I am tryng to acces cloud services and it is saying that I don't have the subscription plan..
How Can I solve this?
You have the old license. If you want the cloud service, you must subscribe and pay monthly. Thanks for this update. I found a bug in Ethermine Pool Balance for ETC, AM recognize it as BTC and show Update failed. ETH Pool balance for Ethermine work. Do you plan to add flypool balance as well? Flypool is a part of ethermine.
Thanks for the feedback. I will add support for Ethermine ETC and Flypool ZEC in the next update. Thanks patrike, can also add RVN and BEAM Flypool balance also?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 07, 2021, 09:20:56 PM |
|
Hello, On my farm I Have GPU's and ASIC's.
My license: Your current license: Professional Edition (10 miners)
On my ASIC's I have the AM firmware (LTC's ASIC's)
On your website it is saying:
Mining fee The firmware has a mining fee of either 2% or 3% (on average a bit lower, about 1.8% and 2.8%) The mining fee is based on a parallel mining concept to avoid any interruptions to the normal mining The firmware with a 3% mining fee includes an Awesome Miner license and doesn't consume any of the licenses available in Awesome Miner. This makes it possible to run Awesome Miner and Cloud Services without paying anything for the license as long as the firmware with a 3% mining fee is being used.
But I am tryng to acces cloud services and it is saying that I don't have the subscription plan..
How Can I solve this?
This mix of GPUs or AM firmware makes the situation a bit special. You are required to have a Cloud Services subscription for the GPUs, but not for the Antminers running the AM firmware. In general, this makes it possible to pay for fewer miners via Cloud Services. In your case you would however still have to sign up for "Professional Subscription", because it's the entry level. This one is for up to 10 miners, but you can use it for any number of Antminers running the AM firmware.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 08, 2021, 12:34:42 PM |
|
Thanks patrike, can also add RVN and BEAM Flypool balance also? Yes, those are added as well!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
geck
Member
Offline
Activity: 145
Merit: 10
|
|
January 09, 2021, 11:41:47 AM |
|
Hi Patrike,
Would it be possible to set a minimum fan speed for certain gpus, or have an option disable fan control for certain miners?
My 3080 and 3090 cards require a higher minimum fan speed compared to my other gpus, and the only workaround i can find is to install msi afterburner and set a short interval time so that it can "override" awesomeminer's fan control
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 12, 2021, 12:42:49 PM |
|
Hi Patrike,
Would it be possible to set a minimum fan speed for certain gpus, or have an option disable fan control for certain miners?
My 3080 and 3090 cards require a higher minimum fan speed compared to my other gpus, and the only workaround i can find is to install msi afterburner and set a short interval time so that it can "override" awesomeminer's fan control
Thanks for your question. If you are using the global fan control (Options dialog, GPU Settings section), it will be applied to all your GPUs. Is the fan speed not set correctly for the 3000-series card as the fan speed value Awesome Miner tries to set is "too low" and is being rejected?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
geck
Member
Offline
Activity: 145
Merit: 10
|
|
January 12, 2021, 01:12:55 PM |
|
Hi Patrike,
Yes i am using global fan control. Awesomeminer is setting the fan speed just fine, the issue is that i need to set the fan on the 3000 series cards higher than my other gpus. Would it not be possible to set fan control on a per-miner basis rather than have a global fan control?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 13, 2021, 02:44:45 PM |
|
Hi Patrike,
Yes i am using global fan control. Awesomeminer is setting the fan speed just fine, the issue is that i need to set the fan on the 3000 series cards higher than my other gpus. Would it not be possible to set fan control on a per-miner basis rather than have a global fan control?
There are currently no feature to exclude specific miners from the global fan control. I've noted your request and we will investigate adding support for this. You can already today define a GPU Clocking Profile with a specific fan speed in the Properties of a miner, but it will not work when the global fan control is enabled.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 13, 2021, 05:16:28 PM |
|
Awesome Miner version 8.2.1
GPU mining - GPU clocking can be set with a delay when a miner is started. Configurable per miner and per algorithm in the Profit Profile. Features - Telegram messages can be sent to additional user accounts if given permissions on the User Group - Device Hashrate trigger improved with more configuration options Integration - Additional pool balance support for Ethermine and Flypool Mining software - Lolminer 1.19 - Gminer 2.41 - CryptoDredge 0.26.0 - T-Rex 0.19.7 - NbMiner 36.1 - XmRig 6.7.1 - Nanominer 3.1.5 - SrbMiner Multi 0.6.3 Corrections - Correction to sorting of the Information column
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 15, 2021, 03:24:54 PM |
|
Awesome Miner version 8.2.2
Mining software - Gminer 2.42 - XmRig 6.7.2 Corrections - Correction to Profit Profile configuration of delayed GPU clocking profile - Correction to Antminer diagnostics feature to use custom SSH port if configured
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
geck
Member
Offline
Activity: 145
Merit: 10
|
|
January 19, 2021, 02:40:24 PM |
|
Hi Patrike,
Could you please add the new excavator? It is pretty decent
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
January 19, 2021, 04:18:34 PM |
|
Hi Patrike,
Could you please add the new excavator? It is pretty decent
Yes, it's in the pipeline for the next release. Please note that Excavator still will require manual downloads, as its license doesn't allow the automatic download as we use for all other mining software.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|