[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[narousberg]

Hi Patrike, i mine on Nicehash, AM show me in Profit Switching tab profit for Etherium 0,00€, but in parentheses (light gray text) is Ethereum only -3.42€
AM use profit value 0.00€ and switching decission is wrong. How to disable this? Regards.

upd: if i overide the power price for profit profile to 0.00€, then this message (Ethereum only) go away and all work fine.

[1715085010]

1715085010

[1715085010]

1715085010

[1715085010]

1715085010

[patrike]

LolMiner starts Beam with --pers Beam-PoW
Removing --pers Beam-PoW makes the miner function on Beam.

Thanks for the feedback. It's probably in the pool configuration this personalization string is found, as the Lolminer integration itself doesn't add it. However, I will go ahead and make sure Lolminer removes any --pers flag when using the BeamHashIII algorithm.

[patrike]

Anyone noticed how the value of ETH along the bar at the bottom of the AM window is wrong?  Mine is currently showing $1,865.95, but ETH sits at $1,428.94 according to Coinbase and coinmarketcap.

Also, I have all my rigs on Ergo right now and AM is showing that my 5.92 GH/s is earning $29.45/day.  That's way off as the 2miners pool I'm on is showing $7.47/day, which is much more realistic and in-line with the Ergo coins I have been paid out so far.

Will this discrepancy sort itself out once things "settle down"?

Could it be that an exchange with low trading volume reported an exchange rate that wasn't fully correct? Please go to the Awesome Miner Options dialog, Statistics Providers section. Please set the Minimum Exchange Volume to 0.1 BTC for example.

To get more details about the calculations made by Awesome Miner, please right click on the miner and select View Details. Go to the Profit Calculation Details tab. This one will indicate the parameters taken into consideration for the mining income calculations.

As you probably noticed, there are also many fluctuations right now. At the time of writing, a hash rate of 5.92 GH/s for ERG will generate $3.60 according to my Awesome Miner.

[crazydane]

The miner profitability issue seems to have sorted itself, but I have been seeing $0.00 for ETH along the bottom bar for several days now:



This is what I have for statistical providers:



Any idea what might be going on?

Buddy of mine has the same settings as me and is seeing the same issue.

[patrike]

The miner profitability issue seems to have sorted itself, but I have been seeing $0.00 for ETH along the bottom bar for several days now:

Getting Ethereum to display correctly has been a moving target recently but there will soon be a new release that correctly will provide the ETH exchange rate.

[patrike]

Awesome Miner version 9.7.1

 ASIC mining
  - LED flash for Antminer L7
 Features
  - Improved performance of Mining History for larger number of miners
 User interface
  - Hide old concept of miner graphs on the dashboard tab in the Windows application
  - Heat map: When showing miner description, remove any common start of the description that is identical across all miners
 Mining software
  - Lolminer 1.58
  - Nanominer 3.7.2
  - SrbMiner-Multi 1.0.8
  - TeamBlackMiner 1.69
  - TeamRedMiner 0.10.3.1
 Corrections
  - Correction to custom API commands sent to Avalon ASIC miners
  - Correction to Antminer T17 (Bitmain firmware) operation to resume mining when in sleep mode
  - Correction to power consumption calculation in the Mining History
  - Correction to display of Ethereum exchange rate

[sxemini]

Awesome Miner version 9.6.6 (Development preview of 9.7)

 ASIC mining
  - Improved support for Antminer E9
  - Improved support for Cheetah Miner
 Features
  - Rules can be configured to execute the actions on miners in smaller batches, to avoid executing for all miners at once
  - Added new security permission for adding new miners
  - Sort by coin in the miner list
  - Improved rule group management by allowing all sub rules to be enabled or disabled at once
 Mining software
  - BzMiner 11.0.3
  - Lolminer 1.55a
  - Nanominer 3.7.1
  - NbMiner 42.3
  - SrbMiner-Multi 1.0.7
 Corrections
  - Correction to detection of Antminer S19

Dualmining ETC+Kas for example is not working - or should i say nearly all miners with dualmining etc+other coin did not working. AM didn´t add the commandline for the second coin.
Tested miners: lolminer (UBIQ+KAS not working for example), SRBminer (ERGO+Blake3/KAS/Heavyhash for example also didn´t work)
SRBminer dualmining option for RAD is not shown.

ETH+other coin work like a charm. But we need ethash algo + other coin after the merge, because we can mine other ethash coins like clo+kas for example, but this option is not working (i must add the whole command line by myself). So it need a bigger rework of this feature in my opinion.


Bug Report:
After a certain time (sometime 1 day and sometimes 5 days for example), AM not updating the value of the coins - it is stuck and so the profit switching stuck. Only restart of the main application help.

Hi,

Thanks for the feedback. I've pushed a mining software definition update where both SrbMiner and Lolminer are updated for more dual mining options.

Can you please send me the Awesome Miner log file for the issue related to the coin updates? Please send the log file when you experience the issue. Thanks!

Sure i can. I have the same failure again and again. At the moment the btc price is around 19000 and AM show me around 19800.

[crazydane]

I picked up some Octominer X8ULTRA PLUS chassis on the cheap locally from someone that's bailing.

Can AM interact with the on-board smart hardware watchdog & fan controller on these?

I  know Hive OS can, and I have most of my rigs running the Hive OS image but having AM manage everything.

What about if I run windows on the rigs?

Thanks

[patrike]

Dualmining ETC+Kas for example is not working - or should i say nearly all miners with dualmining etc+other coin did not working. AM didn´t add the commandline for the second coin.
Tested miners: lolminer (UBIQ+KAS not working for example), SRBminer (ERGO+Blake3/KAS/Heavyhash for example also didn´t work)
SRBminer dualmining option for RAD is not shown.

ETH+other coin work like a charm. But we need ethash algo + other coin after the merge, because we can mine other ethash coins like clo+kas for example, but this option is not working (i must add the whole command line by myself). So it need a bigger rework of this feature in my opinion.


Bug Report:
After a certain time (sometime 1 day and sometimes 5 days for example), AM not updating the value of the coins - it is stuck and so the profit switching stuck. Only restart of the main application help.

Hi,

Thanks for the feedback. I've pushed a mining software definition update where both SrbMiner and Lolminer are updated for more dual mining options.

Can you please send me the Awesome Miner log file for the issue related to the coin updates? Please send the log file when you experience the issue. Thanks!

Sure i can. I have the same failure again and again. At the moment the btc price is around 19000 and AM show me around 19800.

To verify the exchange rate I recommend to use Coinbase. See the link below where you also can select EUR:
https://www.coinbase.com/price/bitcoin

On the 28th, the BTC exchange rate was never as low as 19000 EUR and looking at the graph the value of 19800 is likely correct.

[patrike]

I picked up some Octominer X8ULTRA PLUS chassis on the cheap locally from someone that's bailing.

Can AM interact with the on-board smart hardware watchdog & fan controller on these?

I  know Hive OS can, and I have most of my rigs running the Hive OS image but having AM manage everything.

What about if I run windows on the rigs?

Thanks

Unfortunately Awesome Miner doesn't have any specific support for controlling them

[bensam1231]

Hey Patrike, I've noticed some weird behavior with AM. While it's open it seems to periodically cause network latency spikes, I traced it to my router periodically from 10-30s having CPU spikes. It only occurs with AM open and linked directly to the program. I assuming there is some sort of unicast or multicast thing going on that's not behaving correctly with my router?

[SCMining]

Hi,

I'm trying to setup a view only web view and even though I created a view only group in the security area and unchecked everything, users can still change pool configuration options and click into individual miners and change settings? Thanks

[patrike]

Hey Patrike, I've noticed some weird behavior with AM. While it's open it seems to periodically cause network latency spikes, I traced it to my router periodically from 10-30s having CPU spikes. It only occurs with AM open and linked directly to the program. I assuming there is some sort of unicast or multicast thing going on that's not behaving correctly with my router?

Thanks for your report.

The only time Awesome Miner do multicast is when using the Wake-On-LAN feature for GPU miners. Can you see anything in the Awesome Miner log file (toolbar: Tools -> Log File) during this period of time, if some specific activity is going on?

[patrike]

Hi,

I'm trying to setup a view only web view and even though I created a view only group in the security area and unchecked everything, users can still change pool configuration options and click into individual miners and change settings? Thanks

Is this when creating account on the local web server or additional cloud web users? I'm not able to reproduce the issue in any of those cases, but it might be some more specific scenario.

Could you please send me a screenshot of your configuration in the Security settings? Please send via the contact form on the web site:
https://www.awesomeminer.com/contact

Thanks!

[bensam1231]

Hey Patrike, I've noticed some weird behavior with AM. While it's open it seems to periodically cause network latency spikes, I traced it to my router periodically from 10-30s having CPU spikes. It only occurs with AM open and linked directly to the program. I assuming there is some sort of unicast or multicast thing going on that's not behaving correctly with my router?

Thanks for your report.

The only time Awesome Miner do multicast is when using the Wake-On-LAN feature for GPU miners. Can you see anything in the Awesome Miner log file (toolbar: Tools -> Log File) during this period of time, if some specific activity is going on?

I sent a message with the log file attached.

[SCMining]

Hi,

I'm trying to setup a view only web view and even though I created a view only group in the security area and unchecked everything, users can still change pool configuration options and click into individual miners and change settings? Thanks

Is this when creating account on the local web server or additional cloud web users? I'm not able to reproduce the issue in any of those cases, but it might be some more specific scenario.

Could you please send me a screenshot of your configuration in the Security settings? Please send via the contact form on the web site:
https://www.awesomeminer.com/contact

Thanks!

Hi Patrike, This is when creating a view only account on the local web server, I have port forwarding setup to the local web sever so my finance guy can view but I do not want him to be able to change anything. I will send the requested info. TYVM

[patrike]

Awesome Miner version 9.7.2

 Features
  - Rules: Predefined rules for putting supported ASIC miners to sleep and resume based on the time of the day
  - Rules: Time trigger can be configured to trigger on the last day of month.
  - Rules: Time trigger can be configured to trigger for specific months of the year
 User interface
  - Added an ASIC Only mode to hide GPU mining features
 Changes
  - Enforce new line for list of miner names in notification e-mail messages
  - Disabled Managed Miners will no longer consume a license when using subscription based licensing
 Mining software
  - Gminer 3.07
  - Lolminer 1.60
  - Miniz 1.9z3
  - Nanominer 3.7.3
  - SrbMiner-Multi 1.1.0
  - TeamRedMiner 0.10.4
  - T-Rex miner 0.26.6
  - WildRig Miner 0.32.5
 Corrections
 - Correction to profit switching scenario i case of dual mining is enabled, no secondary coin is available and the profit is negative

[bensam1231]

Hey Patrike, another issue, looks like AM doesn't properly show temperatures from BraiinOS. I reported it to them and they said talk to you.

[patrike]

Hey Patrike, another issue, looks like AM doesn't properly show temperatures from BraiinOS. I reported it to them and they said talk to you.

Thanks for the report. Can you please collect the following details and send me:

1) Select the miner and generate an API Report via the toolbar Tools -> API Report
2) Right click on the miner and select View Details. Go to the API Console tab, enter the command "temps" (without the quotes) and run. Please share the output with me.

Thanks!

[bensam1231]

Hey Patrike, another issue, looks like AM doesn't properly show temperatures from BraiinOS. I reported it to them and they said talk to you.

Thanks for the report. Can you please collect the following details and send me:

1) Select the miner and generate an API Report via the toolbar Tools -> API Report
2) Right click on the miner and select View Details. Go to the API Console tab, enter the command "temps" (without the quotes) and run. Please share the output with me.

Thanks!

Sent in a DM.