[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[crymzyn]

Hello, I'm having issues with getting the Luxor LBC pool stats to come in properly.  Has anyone else added this pool to profit switching?  I only see Equihash mentioned in the thread. 

Here is what I have tried:
- Importing the Online Service via API: https://mining.luxor.tech/api/LBC/stats/
- Creating an Online Service entry manually:
      Service: Luxor Mining Pool
      Algo: LBRY
      URL base: luxor.tech:5555
      URL prefix: stratum+tcp://
      Algo URL part: lbc
      Algo API identifier: lbc
      Include in Managed Profit Switcher: checked
- Added the following to Statistics Providers:
      WhatToMine add'l JSON: https://whattomine.com/coins/164-lbc-lbry.json
      CoinCalc add'l JSON: https://www.coincalculators.io/api?name=lbry

I'm getting the following in log:
1/20/2021 6:26:33 PM.049 [036] [S ]  Pool profit information not available: lbc-us.luxor.tech

Thanks in advance!

[forato]

NOOB question:

I use managed miner with IP (like: 192.168.15.XX)
I am trying to use host becouse sometimes my RIP IP's changes (In this example, my host is: FOR003).

But using hiveos, the AM does not conect using host. Only using IP adreess works..

Is there something special to write on AM to work?

Example:

Remote Agent IP or Hostname: 192.168.15.XX (Works)
Remote Agent IP or Hostname: FOR003 (does not work)

Can anyone helpme?

[patrike]

Hello, I'm having issues with getting the Luxor LBC pool stats to come in properly.  Has anyone else added this pool to profit switching?  I only see Equihash mentioned in the thread. 

Here is what I have tried:
- Importing the Online Service via API: https://mining.luxor.tech/api/LBC/stats/
- Creating an Online Service entry manually:
      Service: Luxor Mining Pool
      Algo: LBRY
      URL base: luxor.tech:5555
      URL prefix: stratum+tcp://
      Algo URL part: lbc
      Algo API identifier: lbc
      Include in Managed Profit Switcher: checked
- Added the following to Statistics Providers:
      WhatToMine add'l JSON: https://whattomine.com/coins/164-lbc-lbry.json
      CoinCalc add'l JSON: https://www.coincalculators.io/api?name=lbry

I'm getting the following in log:
1/20/2021 6:26:33 PM.049 [036] [S ]  Pool profit information not available: lbc-us.luxor.tech

Thanks in advance!

If you check for the LBRY coin in the Coins tab - is it picking up the coin from WhatToMine or CoinCalculators? The reason I'm asking is that the statistics from WhatToMine looks fine CoinCalculators doesn't. The priority can be set in the Options dialog, Statistics Provider section.

If the pool is defined with the coin LBRY, you should be able to get the profitability based on what you see on the coins tab. The Online Services concept isn't required here.

[patrike]

NOOB question:

I use managed miner with IP (like: 192.168.15.XX)
I am trying to use host becouse sometimes my RIP IP's changes (In this example, my host is: FOR003).

But using hiveos, the AM does not conect using host. Only using IP adreess works..

Is there something special to write on AM to work?

Example:

Remote Agent IP or Hostname: 192.168.15.XX (Works)
Remote Agent IP or Hostname: FOR003 (does not work)

Can anyone helpme?

If Windows can resolve the hostname, Awesome Miner should also be able to resolve the hostname. What happens if you ping the hostname via a Windows command prompt? Is it resolving the the correct IP address?

[patrike]

Awesome Miner version 8.2.3

 Features
  - Operation to move a miner to a group made available to the miner specific page in the web interface
 Integration
  - Updated Mining Pool Hub pool list
 Mining software
  - Excavator 1.6 supported. Requires manual download
  - Bminer 16.4.5
  - TeamRedMiner 0.8.0
  - T-Rex miner 0.19.9
 Corrections
  - Correction to use HTTPS for a few additional coin related API sources
  - Correction to scrolling in a long list of miner groups in the web interface

[sxemini]

Hi patrike,

AM did not change the order of the PCI Bus ID in GPU tab if i change the orders of the gpu´s.

[forato]

NOOB question:

I use managed miner with IP (like: 192.168.15.XX)
I am trying to use host becouse sometimes my RIP IP's changes (In this example, my host is: FOR003).

But using hiveos, the AM does not conect using host. Only using IP adreess works..

Is there something special to write on AM to work?

Example:

Remote Agent IP or Hostname: 192.168.15.XX (Works)
Remote Agent IP or Hostname: FOR003 (does not work)

Can anyone helpme?

If Windows can resolve the hostname, Awesome Miner should also be able to resolve the hostname. What happens if you ping the hostname via a Windows command prompt? Is it resolving the the correct IP address?

On windows, ping works only on IP, on putty, ping works with hostname.. I think it is not a AM question...

[patrike]

Hi patrike,

AM did not change the order of the PCI Bus ID in GPU tab if i change the orders of the gpu´s.

What the GPU mapping is doing is to map the hashrates reported from the mining software to a specific GPU. In case Awesome Miner would show the hashrate for the wrong GPU, you can change the order to make this hashrate show up for another GPU.

So it isn't really for moving up/down a GPU in the list in general, but about moving up/down the hashrate and similar details from the mining software to make it show up for the correct GPU

[sxemini]

Hi patrike,

AM did not change the order of the PCI Bus ID in GPU tab if i change the orders of the gpu´s.

What the GPU mapping is doing is to map the hashrates reported from the mining software to a specific GPU. In case Awesome Miner would show the hashrate for the wrong GPU, you can change the order to make this hashrate show up for another GPU.

So it isn't really for moving up/down a GPU in the list in general, but about moving up/down the hashrate and similar details from the mining software to make it show up for the correct GPU

Ok but the name, temp and clocks also change if i map the gpu´s. Only ID did not change in my case.

[narousberg]

Hi Patrike, some strange behavior in applying of overclocking settings i see in the last version (8.2.3)
For examle: rig start mining on Octopus algo with PL85% and MEM2000, later switch to ETH where other overclocking settings from Profit profile must be applied, but settings for ETH will not be applied and rig continue mining with settings from Octopus algo. If i mannualy restart mining process, the correct settings will be applied. That happens with all cards types 2080ti, 3070, 3090. And with random rigs.All rigs is Linux (HiveOS) machine. This problem is offten a reason for GPU crashing, where only reboot help. Please check.
Regards

[patrike]

Hi patrike,

AM did not change the order of the PCI Bus ID in GPU tab if i change the orders of the gpu´s.

What the GPU mapping is doing is to map the hashrates reported from the mining software to a specific GPU. In case Awesome Miner would show the hashrate for the wrong GPU, you can change the order to make this hashrate show up for another GPU.

So it isn't really for moving up/down a GPU in the list in general, but about moving up/down the hashrate and similar details from the mining software to make it show up for the correct GPU

Ok but the name, temp and clocks also change if i map the gpu´s. Only ID did not change in my case.

The list will always start with ID 0 and continue with 1, 2 and so on. I see that I didn't express this very well in my last response - sorry for any confusion. The GPU ID isn't moving up/down, but the actual GPU details are. Let's show this with an example

GPU 0: Geforce RTX 3080 | Clock details | 50% | 60 C | 28 MH/s
GPU 1: Radeon VII           | Clock details | 55% | 65 C | 42 MH/s

Let's say Awesome Miner didn't map the hashrates reported by the mining software to the correct GPU here. So what is wrong with the table above is that the higher hashrate (42MH/s) is actually the Geforce RTX GPU - but is incorrectly displayed for the Radeon VII GPU.

When using the mapping you can change the order and "move up" the Radeon VII GPU. The result will be the following:

GPU 0: Radeon VII           | Clock details | 55% | 65 C | 28 MH/s
GPU 1: Geforce RTX 3080 | Clock details | 50% | 60 C | 42 MH/s

At this point, 42 MH/s is for the Geforce RTX GPU, which we considered as correct for this example. So it's all about mapping the hashrate to the correct GPU. By design the GPU ID is static - but maybe it it adds a bit confusion and it would make more sense to move it as well.

[patrike]

Hi Patrike, some strange behavior in applying of overclocking settings i see in the last version (8.2.3)
For examle: rig start mining on Octopus algo with PL85% and MEM2000, later switch to ETH where other overclocking settings from Profit profile must be applied, but settings for ETH will not be applied and rig continue mining with settings from Octopus algo. If i mannualy restart mining process, the correct settings will be applied. That happens with all cards types 2080ti, 3070, 3090. And with random rigs.All rigs is Linux (HiveOS) machine. This problem is offten a reason for GPU crashing, where only reboot help. Please check.
Regards

I wasn't able to reproduce this one.

1) Can you please send me the log files for Remote Agent and let me know the time it didn't apply the correct clocking profile?
2) Are you using the new concept with delayed overclocking?

[narousberg]

Hi Patrike, some strange behavior in applying of overclocking settings i see in the last version (8.2.3)
For examle: rig start mining on Octopus algo with PL85% and MEM2000, later switch to ETH where other overclocking settings from Profit profile must be applied, but settings for ETH will not be applied and rig continue mining with settings from Octopus algo. If i mannualy restart mining process, the correct settings will be applied. That happens with all cards types 2080ti, 3070, 3090. And with random rigs.All rigs is Linux (HiveOS) machine. This problem is offten a reason for GPU crashing, where only reboot help. Please check.
Regards

I wasn't able to reproduce this one.

1) Can you please send me the log files for Remote Agent and let me know the time it didn't apply the correct clocking profile?
2) Are you using the new concept with delayed overclocking?

yes, i have used new concept with delayed OC, now i am back to old concept and looks like rigs began working normal. Or this happens when rigs switching back from Nicehash. Mining on  Nicehash is defenitly different as on regular pools. Later i will try switch rigs to new OC concept and if issue comback, than we start invistigate a log files. Regards

[tutorialevideo]

Hi.

If we Flash firmware with 3% on s9s we need to pay license?

[patrike]

Hi.

If we Flash firmware with 3% on s9s we need to pay license?

Our Antminer S9 firmware with a 3% mining fee doesn't require you to pay for the Awesome Miner license. You only need to sign up for our completely free "Antminer firmware" license on the link below:
https://www.awesomeminer.com/signup

You simply enter your e-mail address and you will get a license that will work as long as you use it together with Antminers running our firmware with the 3% mining fee.

[patrike]

Awesome Miner version 8.2.4

 ASIC mining
  - The operations for LED flash and miner sleep mode will show a progress dialog to indicate the result of these operations
 Features
  - New rule trigger Device Profile for detecting GPU core clock or GPU memory clock
 Mining software
  - XmRig 6.8
  - Lolminer 1.20
  - Gminer 2.44
  - PhoenixMiner 5.5c
 Corrections
  - Corrections to communication interface for Remote Agent on Linux

[Saki_]

Hi Patrike,
Would it be possible for VertHash/new vertcoin algorithm to be added in profit mining/benchmark?
The miner is here https://github.com/CryptoGraphics/VerthashMiner

I am running mine just manually through there but would be nice to have in profit switching
thank you!

[patrike]

Hi Patrike,
Would it be possible for VertHash/new vertcoin algorithm to be added in profit mining/benchmark?
The miner is here https://github.com/CryptoGraphics/VerthashMiner

I am running mine just manually through there but would be nice to have in profit switching
thank you!

Thanks for the suggestion. It doesn't look like this new mining software provide any monitoring interface (API) yet, so it will not be possible to display the hashrate and similar details in Awesome Miner.

[Orph3us]

Hi PatrickE,

Could you clarify in the FAQs if the Awesome Miner GUI can pull down managed miners and install them?  Initially I thought it could, but it looks like you have to do the install first.  Was hoping to use it to pull down PhoenixMiner, but it looks like I have to install it and then add it to Awesome Miner to manage it.  Would be nice if that was in the FAQs.

~Orph3us~

[patrike]

Hi PatrickE,

Could you clarify in the FAQs if the Awesome Miner GUI can pull down managed miners and install them?  Initially I thought it could, but it looks like you have to do the install first.  Was hoping to use it to pull down PhoenixMiner, but it looks like I have to install it and then add it to Awesome Miner to manage it.  Would be nice if that was in the FAQs.

~Orph3us~

Hi and thanks for your question.

Awesome Miner automatically downloads the mining software. In the Properties of a Managed Miner you will find "Automatic download" (enabled by default). Phoenix Miner will be downloaded as well.

Once you start a Managed Miner, Awesome Miner will automatically download and extract the mining software. If you run into any issues, please start the miner with the Diagnostics button in the toolbar to get more details. Please also verify you don't run any anti-virus software that automatically removes Phoenix Miner.