[CLOSED]Minion Chip Assembly GB

[y_boonstra]

How can we turn on differnt minion chip combinations?


eg:
CHIP

1    2    3    4

on  off  off  off

off  on  off  off

off  off  on  off

off  off  off  on


on  on  off  off


etc etc..

[1714095701]

1714095701

[1714095701]

1714095701

[1714095701]

1714095701

[sorehammer]

that 15 should be 255 chap

Some info regarding enable & disable chips:

The setting use binary numbering.
1 represent enable
0 represent disable

Example:

Chips numbering   ==> 7654 3210       Decimal
all chips enable    ==> 0000 1111         15   or
                               1111 1111        255

all chips disable   ==> 0000 0000          0     

chip 3 disable      ==> 0000 0111         7    

chip 2 disable      ==> 0000 1011         11  

chip 1 disable      ==> 0000 1101         13  

chip 0 disable      ==> 0000 1110         14  

chip 0 & 1 disable ==> 0000 1100         12


Since there is only 4 chips available so 15 also work  

I have no idea what it means though

[technobitVesi]

you do not have an idea but it is correct
Just use a scientific calculator wit
BIN -> Decimal conversion

Regards Vesi

[sorehammer]

just copied and pasted from a few pages back that I understand lol

[y_boonstra]

What is pic work roll for ??

[technobitVesi]

HI,
This is for passing some of the job to pic in order to keep tp-link not overwhelmed .
90 is nominal you can make it either 45 to 254.


Regards:Vesi

[Scrappy Do]

I am done. Your company has failed.  You have delayed to the point of no return. Therefore, I ask you to simply ask you to refund my initial deposit, and treat me as a chip conversion, otherwise, I will request a full refund. You have as of yet to ship a suitable product. Please refund my initial purchase and feel free to keep 300 USD for shipping the crap you sent. I have 5 boards that are unacceptable. Please ship me the remainder of the boards, and I will gladly ship you the shit back.
 
 Please do not make me refute this charge, as you would clearly lose.
 

    --------- Original Message ---------
    Subject: Re: [TechnoBit] Message from contact form [no_sync]
    From: "TECHNOBIT" <office@technobit.eu>
    Date: 10/1/14 10:56 pm
    To:
    Message from TechnoBit
    Your order was marked as shipped because the shipping started. We will send you all 50 miners.
     
     

[technobitVesi]

I am done. Your company has failed.  You have delayed to the point of no return. Therefore, I ask you to simply ask you to refund my initial deposit, and treat me as a chip conversion, otherwise, I will request a full refund. You have as of yet to ship a suitable product. Please refund my initial purchase and feel free to keep 300 USD for shipping the crap you sent. I have 5 boards that are unacceptable. Please ship me the remainder of the boards, and I will gladly ship you the shit back.
 
 Please do not make me refute this charge, as you would clearly lose.
 

    --------- Original Message ---------
    Subject: Re: [TechnoBit] Message from contact form [no_sync]
    From: "TECHNOBIT" <office@technobit.eu>
    Date: 10/1/14 10:56 pm
    To:
    Message from TechnoBit
    Your order was marked as shipped because the shipping started. We will send you all 50 miners.
    
    

Hi,
We did offered you refund month ago. And you refused .
Now all the boards are produced and slowly going out.
By our ToS assembly service is not refundable and you agreed to it.
And at this point We are not able to provide one.
On 26-th of Sep we shipped 12 boards
On 29-th - 10
this Monday - 20
What is the problem with these 5 - not working , broken , under performing ?
We might be able to assist .
If they are broken or non-functional we'll exchange them for you of course.
Again We understand that our delay is frustrating and you are mad on us.
and we sorry for the whole situation

Best Regards: Vesi

[Scrappy Do]

I am done. Your company has failed.  You have delayed to the point of no return. Therefore, I ask you to simply ask you to refund my initial deposit, and treat me as a chip conversion, otherwise, I will request a full refund. You have as of yet to ship a suitable product. Please refund my initial purchase and feel free to keep 300 USD for shipping the crap you sent. I have 5 boards that are unacceptable. Please ship me the remainder of the boards, and I will gladly ship you the shit back.
 
 Please do not make me refute this charge, as you would clearly lose.
 

    --------- Original Message ---------
    Subject: Re: [TechnoBit] Message from contact form [no_sync]
    From: "TECHNOBIT" <office@technobit.eu>
    Date: 10/1/14 10:56 pm
    To:
    Message from TechnoBit
    Your order was marked as shipped because the shipping started. We will send you all 50 miners.
    
    

Hi,
We did offered you refund month ago. And you refused .
Now all the boards are produced and slowly going out.
By our ToS assembly service is not refundable and you agreed to it.
And at this point We are not able to provide one.
On 26-th of Sep we shipped 12 boards
On 29-th - 10
this Monday - 20
What is the problem with these 5 - not working , broken , under performing ?
We might be able to assist .
If they are broken or non-functional we'll exchange them for you of course.
Again We understand that our delay is frustrating and you are mad on us.
and we sorry for the whole situation

Best Regards: Vesi

 Your ToS? Really?

 Wake the hell up. My CC is a real TOS.

 You provide a service, I pay you for it, you fail to deliver, and ship faulty equipment.

 Guess who wins.


Whatever.. here ya go......



I have no problems my friend. Your boards do. I will ship back bad boards as you sent an unacceptable product.
 
I have been more than forgiving to this point. I simply cannot continue on.
 
You company has failed to deliver. I am sorry. You promised a product 12 weeks ago, and even being that late you shipped faulty equipment. That is HORRIBLE!
 
People depend on you and if you could not deliver, you should be straight up and honest. Please refund my money, or I will refute the charge... You will lose. You failed to deliver.
 

    --------- Original Message ---------
    Subject: Re: Re: [TechnoBit] Message from contact form [no_sync]
    From: office@technobit.eu
    Date: 10/7/14 11:57 pm
   
    Hi,
    You have 5 sendings ( boxes) on the way to you since monday.
    What means 5 boards unnaceptable ? Broken not working at all?
    If you have troubles setting them attach them and give me TW access and I'll help
    If there is something broken I'll send you additional ones.
    I did offered you refund before the all the boards were produced.
    Now they are.
    Do have in mind By our ToS assembly service is not refundable.
    Until now I spent for shipping to you more than 700 EUR.
    I understand that our production troubles are our problem and you are furstrated.
     
    Best Martin
     

[technobitVesi]

Hi,
What is the problem with these boards?
How many what is wrong?
We  appreciate yours and others patience and understanding until now
No need of hard words now this is not going to help.
Just let us help you with setup if there are troubles

Regards: Vesi

[Scrappy Do]

Hi,
What is the problem with these boards?
How many what is wrong?
We  appreciate yours and others patience and understanding until now
No need of hard words now this is not going to help.
Just let us help you with setup if there are troubles

Regards: Vesi

 Your refusal to help made me launch a dispute for over 12k usd. I am sorry you chose this route. I have been a valued Minersource buyer until this point. I am sorry you chose this recourse.

[guyver]

@technobitVesi who are you shipping these small orders too. us people who have ordered large amounts and used are chips for conversion have received nothing as of yet.

When are you gonna ship our orders out, seems your fulfilling the small orders with our chips.
im fed up now on waiting. like everyone else on this forum.
you have abused our good nature and left people with high orders stranded.

i want to know realistically when am i gonna get my 25 boards. and what compensation plan you gonna introduce for the lateness in sending out shipment.

im gonna be researching taking legal action against your firm. To stop you making and selling anymore crypto devices to the crypto community. 

[technobitVesi]

@technobitVesi who are you shipping these small orders too. us people who have ordered large amounts and used are chips for conversion have received nothing as of yet.

When are you gonna ship our orders out, seems your fulfilling the small orders with our chips.
im fed up now on waiting. like everyone else on this forum.
you have abused our good nature and left people with high orders stranded.

i want to know realistically when am i gonna get my 25 boards. and what compensation plan you gonna introduce for the lateness in sending out shipment.

im gonna be researching taking legal action against your firm. To stop you making and selling anymore crypto devices to the crypto community. 

Hi,
again it is a bad situation for both GB participants and us.
We are shipping every day what is ready.
DO not forget that we took all the expenses you did not paid us nothing. you can get your chips shipped to your location immediately if you decide to back off.
Even the transport of the chips and logistics were paid not by you but Minersource.
I understand everybody frustration, believe me We are the biggest looser here .
Our own boards should be assembled and sold by now and they are not ready too.
We thank you all for the understanding and patience until now.
Please have some more

Best Regards: Vesi

[MoneyMuscles]

@technobitVesi who are you shipping these small orders too. us people who have ordered large amounts and used are chips for conversion have received nothing as of yet.

When are you gonna ship our orders out, seems your fulfilling the small orders with our chips.
im fed up now on waiting. like everyone else on this forum.
you have abused our good nature and left people with high orders stranded.

i want to know realistically when am i gonna get my 25 boards. and what compensation plan you gonna introduce for the lateness in sending out shipment.

im gonna be researching taking legal action against your firm. To stop you making and selling anymore crypto devices to the crypto community. 

Hi,
again it is a bad situation for both GB participants and us.
We are shipping every day what is ready.
DO not forget that we took all the expenses you did not paid us nothing. you can get your chips shipped to your location immediately if you decide to back off.
Even the transport of the chips and logistics were paid not by you but Minersource.
I understand everybody frustration, believe me We are the biggest looser here .
Our own boards should be assembled and sold by now and they are not ready too.
We thank you all for the understanding and patience until now.
Please have some more

Best Regards: Vesi

Hi Vesi,

Please check your pm

[y_boonstra]

Where can i find:
- windows driver
- CGminer driver

are the temp and fan speed settings comming soon?

[technobitVesi]

Where can i find:
- windows driver
- CGminer driver

are the temp and fan speed settings comming soon?

Hi,
Windows build how to : https://bitcointalk.org/index.php?topic=569689.0
here you can find a link for suitable drivers too

Latest cgminer build with our 0.3.9 patch : http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_9.zip

If you want to build it yourself use latest patch from our download page.

For now temp and fan speed settings are not ready, except overheat protection implemented since the beginning in FW

[y_boonstra]

Vesi,

Any word on the AMD brackets ?

[MoneyMuscles]

Where can i find:
- windows driver
- CGminer driver

are the temp and fan speed settings comming soon?

Hi,
Windows build how to : https://bitcointalk.org/index.php?topic=569689.0
here you can find a link for suitable drivers too

Latest cgminer build with our 0.3.9 patch : http://bitcoinbg.eu/tools/cgminer_technobit_win/cgminer_0_3_9.zip

If you want to build it yourself use latest patch from our download page.

For now temp and fan speed settings are not ready, except overheat protection implemented since the beginning in FW

Vesi, Please look at your PM box.

[y_boonstra]

Vesi,

Any word on the AMD brackets ?

up

[technobitVesi]

Vesi,

Any word on the AMD brackets ?

up

HI,
Yours will be out today.
For others we'll put a product on the website with 0 price and no transport costs , you just have to provide your hex4m order ref

Regards: Vesi