BITMAIN Antminer S3 support and OverClocking thread

[allcoinminer]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

[X3rxis]

Cool thanks :-)

[00pmac00]

Hi.
I have been looking but trying to fine the needle in a haystack here.
I am planning on having 3-4 of these units, and was wondering how you would hook them all up having the same IP? is there a thread/post with instructions on how to?

[shadow2]

 I did see a post be someone using different ports while on the same IP address but that was more in passing than as an instruction on how to do it. what you actually do is connect 1 at a time log into the web interface and change the IP manually.  some suggest using DHCP but the IP address is random so it makes accessing the web interface a bit hard if you don't know for sure what the IP address is

anyway the guide you are after is

https://bitcointalk.org/index.php?topic=702653

[00pmac00]

I did see a post be someone using different ports while on the same IP address but that was more in passing than as an instruction on how to do it. what you actually do is connect 1 at a time log into the web interface and change the IP manually.  some suggest using DHCP but the IP address is random so it makes accessing the web interface a bit hard if you don't know for sure what the IP address is

anyway the guide you are after is

https://bitcointalk.org/index.php?topic=702653

OK so going in and doing a simple change to the 3 new ones one by one to .96, .97, .98 and the current one I have is .99 (default) to KISS (keep it simple stupid )

If thats all it will take then great. Just would tape a piece of paper with the ip on each unit to login if there are problems to know which is which then.

Thanks

[philipma1957]

I did see a post be someone using different ports while on the same IP address but that was more in passing than as an instruction on how to do it. what you actually do is connect 1 at a time log into the web interface and change the IP manually.  some suggest using DHCP but the IP address is random so it makes accessing the web interface a bit hard if you don't know for sure what the IP address is

anyway the guide you are after is

https://bitcointalk.org/index.php?topic=702653

OK so going in and doing a simple change to the 3 new ones one by one to .96, .97, .98 and the current one I have is .99 (default) to KISS (keep it simple stupid )

If thats all it will take then great. Just would tape a piece of paper with the ip on each unit to login if there are problems to know which is which then.

Thanks

and here is a link to scan your ip's

http://advanced-ip-scanner.com/


comes in helpful with a windows system.   

you may not be able to set your s-3's to .96 .97 .98 .99 since you could have other gear on those addresses.

[Wings1987]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

I posted the same question earlier and contacted IRC support with no luck.

Did you come up with anything? It has been about 2 weeks since I tried.

[kkurtmann]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

I posted the same question earlier and contacted IRC support with no luck.

Did you come up with anything? It has been about 2 weeks since I tried.

I rent mine through MRR. maybe you are not patient enough, took a few hours to show up once set

[bruno033]

https://bitcointalk.org/index.php?topic=596178.0

[thehairymob]

https://bitcointalk.org/index.php?topic=596178.0

Yes it is a great little program.

[miguportugal]

i want to undervol my s3 can someone help

[Wings1987]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

I posted the same question earlier and contacted IRC support with no luck.

Did you come up with anything? It has been about 2 weeks since I tried.

I rent mine through MRR. maybe you are not patient enough, took a few hours to show up once set

Still can't get it to work. Would you please share your config? Are you using http:// or stratum+tcp://  and what version of the firmware are you using.

Thanks in advance for some help.

[chadwickx16]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

I posted the same question earlier and contacted IRC support with no luck.

Did you come up with anything? It has been about 2 weeks since I tried.

I rent mine through MRR. maybe you are not patient enough, took a few hours to show up once set

Still can't get it to work. Would you please share your config? Are you using http:// or stratum+tcp://  and what version of the firmware are you using.

Thanks in advance for some help.

MRR Works fine for me using the http:// us-west.

[Wings1987]

Miningrigrentals.com


anyone renting your S3's here? I can't get mine to connect to their service and was hoping for some guidance. There are some available to rent on the site so I know it is possible.

They have like IRC support and also ticket system.
Go to their IRC channel from the account page and your problem will be fixed instantly.
Also whats your actual issues in connecting the S3 to MRR?

I posted the same question earlier and contacted IRC support with no luck.

Did you come up with anything? It has been about 2 weeks since I tried.

I rent mine through MRR. maybe you are not patient enough, took a few hours to show up once set

Still can't get it to work. Would you please share your config? Are you using http:// or stratum+tcp://  and what version of the firmware are you using.

Thanks in advance for some help.

MRR Works fine for me using the http:// us-west.

What firmware are you using?

Does it take a long time to connect to their service? Someone above mentioned it took a few hours. I have been waiting 10 minutes but never tried waiting hours.

[finlof]

got my batch 8 shipping notification...

[bruno033]

hello, I have a question, I want to change the thermal paste on my S3. I would have to kind thank you

[miguportugal]

i have 2 antminer s3, i change the clock in putty to 225 237 250 mhz
but the antminer stays always in 218.75 mhz

i have a 1000w psu

[miguportugal]

the answer is in page 24

 

[bobsav2121]

Has anyone got any Bitmain S3+.
Was wondering if THEY overclock better than the original ?

[pekatete]

Has anyone got any Bitmain S3+.
Was wondering if THEY overclock better than the original ?

I think all units from batch 6 are S3+
Have a look at this B6 overclock: https://bitcointalk.org/index.php?topic=750220.new;topicseen