rpandassociates
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 10, 2014, 05:14:18 PM |
|
the 1923168.1.2 is the dhcp assigned address via the cable modem/router should i be using the actual ip address from whatismyip ?
|
|
|
|
Count_Frackula
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 10, 2014, 05:24:27 PM |
|
the 1923168.1.2 is the dhcp assigned address via the cable modem/router should i be using the actual ip address from whatismyip ?
Don't use the DHCP assigned by your router, as this could change. Use a static IP that you assign to your NIC. Since it sounds like you don't really know how to configure this, I would recommend just using ckolivas' Solo Pool, http://solo.ckpool.org, instead.
|
|
|
|
tonyec99
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2014, 02:10:39 PM |
|
|
|
|
|
AlleyCat67
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 11, 2014, 09:54:16 PM |
|
|
|
|
|
Count_Frackula
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 13, 2014, 03:29:41 PM |
|
You misspelled 'utilizing'. Strictly only 2 PCI-E connectors are required at stock speeds, however it will reduce cable temperatures by utilising all 4.
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 13, 2014, 03:59:10 PM |
|
You misspelled 'utilizing'. Strictly only 2 PCI-E connectors are required at stock speeds, however it will reduce cable temperatures by utilising all 4. You forgot that the US isn't the only country in the world, thanks.
|
|
|
|
MasterRadix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 16, 2014, 09:34:04 AM |
|
Hey Dogie. Bitmain says the fans are "Two 14038" (140mm) and you say they are 120mm. Who is right? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 16, 2014, 10:55:14 AM |
|
Hey Dogie. Bitmain says the fans are "Two 14038" (140mm) and you say they are 120mm. Who is right? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) 120mm. S3s are only 137mm wide so they're certainly not 140mm fans. I think 14038 is in reference to a generic fan part they intended to use, but they now used the more expensive JDH fans that were found on the S2.
|
|
|
|
MasterRadix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 16, 2014, 08:36:11 PM |
|
Thanks for your quick answer =)
|
|
|
|
dawkterdan
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 22, 2014, 07:27:39 PM |
|
Ran into a problem!
First S3+ is hashing away, problem free.
My second, however, wasn't so lucky. After a botched Update on the firmware(just as i did on the first one), I tried to access the web gui again. It was not available, so i decided to do an IP scan, but it did not show up..
Now I am stuck here, with 50% of my rig no hashing and it's a tad depressing.. Hoping someone has run into this problem and has fixed it!
|
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2014, 08:41:29 AM |
|
Ran into a problem!
First S3+ is hashing away, problem free.
My second, however, wasn't so lucky. After a botched Update on the firmware(just as i did on the first one), I tried to access the web gui again. It was not available, so i decided to do an IP scan, but it did not show up..
Now I am stuck here, with 50% of my rig no hashing and it's a tad depressing.. Hoping someone has run into this problem and has fixed it!
You can try the reset button but you'll likely have to send the controller back.
|
|
|
|
Mick2000
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2014, 05:28:30 PM |
|
Ok 1 Dumbass question. A Newbie to the Britain S3+ but not a newbie to it.
Can each side of the miner be powered from separate PSU's?
Have to say mine arrived today and hashing away nicely! 😁
Mick
|
|
|
|
ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2014, 05:31:42 PM |
|
Ok 1 Dumbass question. A Newbie to the Britain S3+ but not a newbie to it.
Can each side of the miner be powered from separate PSU's?
Have to say mine arrived today and hashing away nicely! 😁
Mick
No
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2014, 06:31:30 PM |
|
Ok 1 Dumbass question. A Newbie to the Britain S3+ but not a newbie to it.
Can each side of the miner be powered from separate PSU's?
Have to say mine arrived today and hashing away nicely! 😁
Mick
No More than likely it can as the power is only shared over the controller board and its unlikely to be anything noteworthy.
|
|
|
|
nukefxr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 23, 2014, 09:34:58 PM |
|
Hello I am also new to mining and wanted to say Thank you Dogie for setting up this post and to all others for there helpful answers. I have an S3+ and had trouble getting it to mine I had a friend who also has the same miner come over to help me. After quite a while of banging our heads he figured out in miner config of my s3+ It wont recognize any input in the form of stratum+tcp://stratum.btcguild.com:3333 address (for example). it will only recognize ipb4 net addresses 127.0.0.1.53(for example) Any input from the group? thanks in advance hope i worded the question right.
|
BitcoinTalkRadio.com Owned and Operated by Bitcoin Media Group LLC
|
|
|
dogie (OP)
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 24, 2014, 06:31:44 AM |
|
Hello I am also new to mining and wanted to say Thank you Dogie for setting up this post and to all others for there helpful answers. I have an S3+ and had trouble getting it to mine I had a friend who also has the same miner come over to help me. After quite a while of banging our heads he figured out in miner config of my s3+ It wont recognize any input in the form of stratum+tcp://stratum.btcguild.com:3333 address (for example). it will only recognize ipb4 net addresses 127.0.0.1.53(for example) Any input from the group? thanks in advance hope i worded the question right.
What happens when you put stratum+tcp://stratum.btcguild.com:3333 in?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2674
Merit: 1240
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 24, 2014, 06:39:49 AM |
|
Hello I am also new to mining and wanted to say Thank you Dogie for setting up this post and to all others for there helpful answers. I have an S3+ and had trouble getting it to mine I had a friend who also has the same miner come over to help me. After quite a while of banging our heads he figured out in miner config of my s3+ It wont recognize any input in the form of stratum+tcp://stratum.btcguild.com:3333 address (for example). it will only recognize ipb4 net addresses 127.0.0.1.53(for example) Any input from the group? thanks in advance hope i worded the question right.
Your DNS Server is probably not working. Are you using DHCP or Static IP ? If Static, make sure you have the right DNS Server set, you can use 8.8.8.8 for Google's DNS. If DHCP, check your DHCP Settings, they should usually automatically deliver a DNS Server.
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
nukefxr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 25, 2014, 02:08:21 AM |
|
Hello I am also new to mining and wanted to say Thank you Dogie for setting up this post and to all others for there helpful answers. I have an S3+ and had trouble getting it to mine I had a friend who also has the same miner come over to help me. After quite a while of banging our heads he figured out in miner config of my s3+ It wont recognize any input in the form of stratum+tcp://stratum.btcguild.com:3333 address (for example). it will only recognize ipb4 net addresses 127.0.0.1.53(for example) Any input from the group? thanks in advance hope i worded the question right.
Your DNS Server is probably not working. Are you using DHCP or Static IP ? If Static, make sure you have the right DNS Server set, you can use 8.8.8.8 for Google's DNS. If DHCP, check your DHCP Settings, they should usually automatically deliver a DNS Server. Thanks for the info i will have my friend look at it next time he comes over. Right now its working fine and i am scared to touch anything LOL
|
BitcoinTalkRadio.com Owned and Operated by Bitcoin Media Group LLC
|
|
|
aigeezer
Legendary
Offline
Activity: 1450
Merit: 1013
Cryptanalyst castrated by his government, 1952
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 25, 2014, 02:22:18 AM |
|
It wont recognize any input in the form of stratum+tcp://stratum.btcguild.com:3333 address (for example).
I am not sure how literally you mean that example, but mine work with http://stratum.btcguild.com:3333 (no tcp) when mining at the guild. Some pools use the tcp variant, but Slush and the guild work fine without it.
|
|
|
|
Count_Frackula
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 25, 2014, 02:50:51 PM |
|
Ok 1 Dumbass question. A Newbie to the Britain S3+ but not a newbie to it.
Can each side of the miner be powered from separate PSU's?
Have to say mine arrived today and hashing away nicely! 😁
Mick
No More than likely it can as the power is only shared over the controller board and its unlikely to be anything noteworthy. Yes, it can. Bitmain confirmed that at some point. The controller board is actually only powered by one side, not the other.
|
|
|
|
|