NSGminer v0.9.4: The Fastest NeoScrypt GPU Miner

[Lumining]

Hi guys can someone post me a bat file for RX480 GPUs please?
I can't get it up and running, when I run the bat file, the screen appears for a fraction of a second and closes again.

[1714803811]

1714803811

[1714803811]

1714803811

[1714803811]

1714803811

[jackintro]

my hashrate is 470kh its low
please help to get more hashrate

Considering the last public donation was over a year ago, sometimes I ask myself why I should bother with all these requests to get more hash rate.

I feel you, build in a small fee =) Times aren't like they used to be.

... and a GUI, people willl gladly pay the (1-1,5%) fee when they can just click the .exe and up& away with just some radiobutton choices and a startbutton in Winx64.

[MegoBasha]

it gives me a black screen
coin GBX
altminer.net
stratum+tcp://eu1.altminer.net:4233


why please?

thanks
Mego

[gsanjin]

it gives me a black screen
coin GBX
altminer.net
stratum+tcp://eu1.altminer.net:4233


why please?

thanks
Mego

nsgminer doesn't work with altminer.net and few other yaamp/yiimp pools for month already. And seems like nobody cares.

[CointoHash411]

Does anyone know what the N-Factor is for neoscrypt coins like feathercoin?

-CointoHash411

[promomei]

it gives me a black screen
coin GBX
altminer.net
stratum+tcp://eu1.altminer.net:4233


why please?

thanks
Mego

try port 10000

[cocobball]

Thanks for your work going to give a try!

[ghostlander]

Does anyone know what the N-Factor is for neoscrypt coins like feathercoin?

-CointoHash411

N=128 for all known NeoScrypt coins.

[Harry5555]

What hashrate can I expect for a GTX 980TI without overclock?

[ek2teen]

I have one Rx 580 and One Rx 480. What should be the .bat setting?

[gsanjin]

This is log file of black screen with altminer, same with all neoscrypt coins. Everything is working ok with other pools.

Code:

[11:14:19] Probing for an alive pool
[11:14:19] Testing pool stratum+tcp://eu1.altminer.net:10007
[11:14:19] HTTP request failed: Protocol "stratum+tcp" not supported or disabled in libcurl
[11:14:19] JSON stratum auth failed: (unknown reason)
[11:14:19] Unable to get work from pool 0 stratum+tcp://eu1.altminer.net:10007
[11:14:19] No servers were found that could be used to get work from.
[11:14:19] Please check the details from the list below of the servers you have input
[11:14:19] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[11:14:19] Pool: 0  URL: stratum+tcp://eu1.altminer.net:10007  User: my_wallet_address  Password: c=SPK
[11:14:19] Press any key to exit or the miner will try again in 15s.

[olanin12]

I am only getting about 400-600 KH/s with a 1080TI. How is everyone else getting more? Do I have something set wrong?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

nsgminer.exe --neoscrypt -g 1 -w 128 -I 18  -o stratum+tcp://mining-dutch.nl:3616  -O username


--------------
 OCL 0:  65.0C   64RPM | 638.9 637.6 587.4 KH/s | A:25 R:0 HW:0 U: 2.8/m

[gsanjin]

I am only getting about 400-600 KH/s with a 1080TI. How is everyone else getting more? Do I have something set wrong?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

nsgminer.exe --neoscrypt -g 1 -w 128 -I 18  -o stratum+tcp://mining-dutch.nl:3616  -O username


--------------
 OCL 0:  65.0C   64RPM | 638.9 637.6 587.4 KH/s | A:25 R:0 HW:0 U: 2.8/m

nsgminer is much more optimized for ATI (AMD) cards, use ccminer-x64/KlausT or hsrminer for nVidia cards.

[rascabily]

I am only getting about 400-600 KH/s with a 1080TI. How is everyone else getting more? Do I have something set wrong?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

nsgminer.exe --neoscrypt -g 1 -w 128 -I 18  -o stratum+tcp://mining-dutch.nl:3616  -O username


--------------
 OCL 0:  65.0C   64RPM | 638.9 637.6 587.4 KH/s | A:25 R:0 HW:0 U: 2.8/m

nsgminer is much more optimized for ATI cards, use ccminer-x64/KlausT or hsrminer for nVidia cards.

that miner is better for amd?

[gsanjin]

I am only getting about 400-600 KH/s with a 1080TI. How is everyone else getting more? Do I have something set wrong?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

nsgminer.exe --neoscrypt -g 1 -w 128 -I 18  -o stratum+tcp://mining-dutch.nl:3616  -O username


--------------
 OCL 0:  65.0C   64RPM | 638.9 637.6 587.4 KH/s | A:25 R:0 HW:0 U: 2.8/m

nsgminer is much more optimized for ATI cards, use ccminer-x64/KlausT or hsrminer for nVidia cards.

that miner is better for amd?

ATI = AMD. For AMD cards use nsgminer.

[huglester]

on NVIDIA cards,
should I use NeoScrypt CCminer (and compile) or NSGminer (and compile)?
ccminer version seems a bit old.
but NSGminer shows that it supports NVIDIA cards.

Thank you

[philosothink]

thank you ghostrider for all your hard work.  I'm just some hillbilly learning how to mine and I appreciate your code-child.

you should consider putting in a -ghostriderrocks [0-100] which would direct that percentage of the mining to your project.  When you need new hardware we could just put out the call for miners to dedicate an hour to you or something like that...  count me in.  None of the coin from my AMD rig would be coming my direction, without your dedication to the project.


my humble little rig in the basement is a pair of rx580 4gb cards, and i have an r9 nano on the way to join them.  This rig is running a GTX 1070ti. 

I'm just kicking myself in the backside for not getting into mining sooner...

[djm34]

thank you ghostrider ghostlander for all your hard work.  I'm just some hillbilly learning how to mine and I appreciate your code-child.

you should consider putting in a -ghostriderrocks [0-100] -ghostlanderrocks [0-100]which would direct that percentage of the mining to your project.  When you need new hardware we could just put out the call for miners to dedicate an hour to you or something like that...  count me in.  None of the coin from my AMD rig would be coming my direction, without your dedication to the project.


my humble little rig in the basement is a pair of rx580 4gb cards, and i have an r9 nano on the way to join them.  This rig is running a GTX 1070ti.  

I'm just kicking myself in the backside for not getting into mining sooner...

you're welcome

[lostprophet007]

Hello,
thanks for the guide and the scritp.
I have been using this script since today, as I want to start mining Trezarcoin.

I have 2 RX580 on this rig, modded  for ethereum mining.
Drivers: blockchain drivers 23 august for AMD.
overtuned with overdrive ntool (classic configuration for ethereum P7 1130 0,83 Volt)

I have notice d that with this string
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

nsgminer -k neoscrypt -g 1 -w 128 -I 18 -o pool -O xxx.x:xxx

I have a strange ripple on Hashrate stability: it swings starting from  500.kH/s up to 1.5MH/s per card.
It is very strange.

Can you help me to tune the values?

thanks and many compliments for your work

[dragonmike]

I'm getting weird error messages: "Pool 0 is sending mismatched block contents to us (0 is not 8-15)"

Any hints?