[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[Razerglass]

will this work ?

http://www.ebay.com/itm/PCI-to-4-ports-SATA-Serial-ATA-RAID-Sil3114-3114-Converter-Controller-I-O-Card-/230694154225?pt=US_Drive_Cables_dapters&hash=item35b6716ff1

Sata 1 is good enough ?

Sata 3 is very expensive

sata 2 is faster but not as expensive

Very expensive for sata 2

http://www.ebay.com/itm/32bit-PCI-to-4-port-SATA-II-SATA2-RAID-Silicon-Image-SIL3124-NCQ-Adapter-/161340950258?pt=LH_DefaultDomain_0&hash=item2590ab86f2

Although sata 2 is faster , but the question is sata 1 good enough ? 1.5 gb / s is good enough for the operation ? It depend on HDD size , but i think its good enough for a 3 TB HDD since a fully plot 3 TB HDD would require less than 1 gb of reading when mining ? Am i correct ? I am not sure. I remember mining only read around 0.026% of space

 
2 for $10    http://www.ebay.com/itm/eSATA-II-SATA-II-IDE-3-5-RAID-to-PCI-E-PCI-Express-Converter-Adapter-JMB363-/331208214082?pt=US_Drive_Cables_dapters&hash=item4d1d8c4642



4 for $20  http://www.ebay.com/itm/4-Port-SATA-RAID-to-PCI-Express-PCI-E-Card-Adapter-Converter-bootable-/171374466524?pt=US_Drive_Cables_dapters&hash=item27e6b6d5dc

the one i show is 4 port.

For the one u show 4 port, 2 port is sata 1.



Data transfer rate up to 300MB/s (3.0Gbps) per SATA II port.

Data transfer rate up to 133MB/s (1.3Gbps) per SATA port from PATA.

2 SATA II ports (J1 & J2) & 2 SATA ports from PATA (J3 & J4) available.

you have some people mining with usb2.0 for connected harddrives.. thats what 60mbps  so sata 1 should be fine. just takes longer to read your plots

[1715231116]

1715231116

[1715231116]

1715231116

[1715231116]

1715231116

[1715231116]

1715231116

[yellowduck2]

will this work ?

http://www.ebay.com/itm/PCI-to-4-ports-SATA-Serial-ATA-RAID-Sil3114-3114-Converter-Controller-I-O-Card-/230694154225?pt=US_Drive_Cables_dapters&hash=item35b6716ff1

Sata 1 is good enough ?

Sata 3 is very expensive

sata 2 is faster but not as expensive

Very expensive for sata 2

http://www.ebay.com/itm/32bit-PCI-to-4-port-SATA-II-SATA2-RAID-Silicon-Image-SIL3124-NCQ-Adapter-/161340950258?pt=LH_DefaultDomain_0&hash=item2590ab86f2

Although sata 2 is faster , but the question is sata 1 good enough ? 1.5 gb / s is good enough for the operation ? It depend on HDD size , but i think its good enough for a 3 TB HDD since a fully plot 3 TB HDD would require less than 1 gb of reading when mining ? Am i correct ? I am not sure. I remember mining only read around 0.026% of space

 
2 for $10    http://www.ebay.com/itm/eSATA-II-SATA-II-IDE-3-5-RAID-to-PCI-E-PCI-Express-Converter-Adapter-JMB363-/331208214082?pt=US_Drive_Cables_dapters&hash=item4d1d8c4642



4 for $20 http://www.ebay.com/itm/4-Port-SATA-RAID-to-PCI-Express-PCI-E-Card-Adapter-Converter-bootable-/171374466524?pt=US_Drive_Cables_dapters&hash=item27e6b6d5dc

the one i show is 4 port.

For the one u show 4 port, 2 port is sata 1.



Data transfer rate up to 300MB/s (3.0Gbps) per SATA II port.

Data transfer rate up to 133MB/s (1.3Gbps) per SATA port from PATA.

2 SATA II ports (J1 & J2) & 2 SATA ports from PATA (J3 & J4) available.

you have some people mining with usb2.0 for connected harddrives.. thats what 60mbps  so sata 1 should be fine. just takes longer to read your plots

yeah i though so too. If people were to go big mining this , it have to be cost effective. If sata 1 is good enough , i wouldn't want to spend even an extra dollar for something better

[Razerglass]

will this work ?

http://www.ebay.com/itm/PCI-to-4-ports-SATA-Serial-ATA-RAID-Sil3114-3114-Converter-Controller-I-O-Card-/230694154225?pt=US_Drive_Cables_dapters&hash=item35b6716ff1

Sata 1 is good enough ?

Sata 3 is very expensive

sata 2 is faster but not as expensive

Very expensive for sata 2

http://www.ebay.com/itm/32bit-PCI-to-4-port-SATA-II-SATA2-RAID-Silicon-Image-SIL3124-NCQ-Adapter-/161340950258?pt=LH_DefaultDomain_0&hash=item2590ab86f2

Although sata 2 is faster , but the question is sata 1 good enough ? 1.5 gb / s is good enough for the operation ? It depend on HDD size , but i think its good enough for a 3 TB HDD since a fully plot 3 TB HDD would require less than 1 gb of reading when mining ? Am i correct ? I am not sure. I remember mining only read around 0.026% of space

 
2 for $10    http://www.ebay.com/itm/eSATA-II-SATA-II-IDE-3-5-RAID-to-PCI-E-PCI-Express-Converter-Adapter-JMB363-/331208214082?pt=US_Drive_Cables_dapters&hash=item4d1d8c4642



4 for $20 http://www.ebay.com/itm/4-Port-SATA-RAID-to-PCI-Express-PCI-E-Card-Adapter-Converter-bootable-/171374466524?pt=US_Drive_Cables_dapters&hash=item27e6b6d5dc

the one i show is 4 port.

For the one u show 4 port, 2 port is sata 1.



Data transfer rate up to 300MB/s (3.0Gbps) per SATA II port.

Data transfer rate up to 133MB/s (1.3Gbps) per SATA port from PATA.

2 SATA II ports (J1 & J2) & 2 SATA ports from PATA (J3 & J4) available.

you have some people mining with usb2.0 for connected harddrives.. thats what 60mbps  so sata 1 should be fine. just takes longer to read your plots

yeah i though so too. If people were to go big mining this , it have to be cost effective. If sata 1 is good enough , i wouldn't want to spend even an extra dollar for something better

yeah im right behind you with ordering some. but ive managed to put harddrives/miners on other computers and free up sata ports for more

[yellowduck2]

will this work ?

http://www.ebay.com/itm/PCI-to-4-ports-SATA-Serial-ATA-RAID-Sil3114-3114-Converter-Controller-I-O-Card-/230694154225?pt=US_Drive_Cables_dapters&hash=item35b6716ff1

Sata 1 is good enough ?

Sata 3 is very expensive

sata 2 is faster but not as expensive

Very expensive for sata 2

http://www.ebay.com/itm/32bit-PCI-to-4-port-SATA-II-SATA2-RAID-Silicon-Image-SIL3124-NCQ-Adapter-/161340950258?pt=LH_DefaultDomain_0&hash=item2590ab86f2

Although sata 2 is faster , but the question is sata 1 good enough ? 1.5 gb / s is good enough for the operation ? It depend on HDD size , but i think its good enough for a 3 TB HDD since a fully plot 3 TB HDD would require less than 1 gb of reading when mining ? Am i correct ? I am not sure. I remember mining only read around 0.026% of space

 
2 for $10    http://www.ebay.com/itm/eSATA-II-SATA-II-IDE-3-5-RAID-to-PCI-E-PCI-Express-Converter-Adapter-JMB363-/331208214082?pt=US_Drive_Cables_dapters&hash=item4d1d8c4642



4 for $20 http://www.ebay.com/itm/4-Port-SATA-RAID-to-PCI-Express-PCI-E-Card-Adapter-Converter-bootable-/171374466524?pt=US_Drive_Cables_dapters&hash=item27e6b6d5dc

the one i show is 4 port.

For the one u show 4 port, 2 port is sata 1.



Data transfer rate up to 300MB/s (3.0Gbps) per SATA II port.

Data transfer rate up to 133MB/s (1.3Gbps) per SATA port from PATA.

2 SATA II ports (J1 & J2) & 2 SATA ports from PATA (J3 & J4) available.

you have some people mining with usb2.0 for connected harddrives.. thats what 60mbps  so sata 1 should be fine. just takes longer to read your plots

yeah i though so too. If people were to go big mining this , it have to be cost effective. If sata 1 is good enough , i wouldn't want to spend even an extra dollar for something better

yeah im right behind you with ordering some. but ive managed to put harddrives/miners on other computers and free up sata ports for more

Nope i am way behind u. I am only planning , getting ready if everything looks good. I am learning as much as i can so that i don't spend too much money learning. There is a saying lesson cost money , good one cost less.

I am not going to expand until the coast is clear. Right now , it's still planning stage for me.

This coin is too new. It can either go to the moon and stay there or get stomp to the ground , buried.

[Razerglass]

well its only like what almost a month old. the network size is pretty incredible. there is lot of harddrive space plotted.

[fivebells]

For solo or pool mining, I would need to generate the plots for your own address, so unfortunately I can't pre-generate plots. However, I can deploy storage very quickly in the cloud.

Thanks, I'll keep it in mind.

[paradigmflux]

Great coin will be holding for the long haul. Is there an IRC channel for this coin? If not there should be.

#Burstcoin

check out http://burstmultipool.com/irc for a web client.

[Razerglass]

Great coin will be holding for the long haul. Is there an IRC channel for this coin? If not there should be.

#Burstcoin

check out http://burstmultipool.com/irc for a web client.

does any one know who the channel op is for there. ive been sitting in that channel since there was 1 person in there and never seen a channel op

[paradigmflux]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

[paradigmflux]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

BTW, you can daisy chain up to three enclosures in a row off of a single external SFF-8088 port.
You can easily fit 3 HBA's into most computers that will each have two SFF-8088 ports, which means you can run up to 18 enclosure off of a single box.
which is 288 disks per box.

oh, and they all run 3 gigabit SATA3 speeds.

[Razerglass]

still gotta plot the harddrives first though. my desk is big enough for  16 harddrives.  but very nice thinking

edit for 300~ id rather grab another 10TB and just clutter my desk

[SpeedDemon13]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

People can use eSata with an eSata enclosure with multiple bays for cheaper. Most motherboards have eSata already, plus 8 to 12 Sata ports on board.

[Razerglass]

bottle kneck is CPU plotting not sata ports/ harddrive organization

"- Up to 32TB with 2TB disk drives" what if i wanted to use 4tb hdds

[paradigmflux]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

People can use eSata with an eSata enclosure with multiple bays for cheaper. Most motherboards have eSata already, plus 8 to 12 Sata ports on board.

That disk enclosure is $135, you find me a 16 bay eSATA enclosure for less than $150 and I'll kiss your ass.
Then you find me a eSATA enclosure that you can connect 18 of to a single server.

[Billyboy402]

i have made a HOW TO movie on youtube ,
Feedback is welcome as it was my first youtube unload and i am still new to burst coin my self

http://youtu.be/oYlf1xFTHvs

[SpeedDemon13]

bottle kneck is CPU plotting not sata ports/ harddrive organization

"- Up to 32TB with 2TB disk drives" what if i wanted to use 4tb hdds

Plot generation with cpu is difficult on big arrays of hdd's, especially for a single socket motherboard. Ideally a quad socket motherboard (ie. server motherboards) are more ideal for plotting and have a lot of memory slots too.

[SpeedDemon13]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

People can use eSata with an eSata enclosure with multiple bays for cheaper. Most motherboards have eSata already, plus 8 to 12 Sata ports on board.

That disk enclosure is $135, you find me a 16 bay eSATA enclosure for less than $150 and I'll kiss your ass.
Then you find me a eSATA enclosure that you can connect 18 of to a single server.

I'll pass on kissing my rear, that's kind of gay....

Even if you get all that storage going, the time of plotting still would take long. At that rate, I would rather put 10 hdd's in a case, then get another rig plotting also and so fort. Plotting is dependent on cpu thread, memory and the efficiency of the data throughput of the system overall.

[zheratuul]

i have made a HOW TO movie on youtube ,
Feedback is welcome as it was my first youtube unload and i am still new to burst coin my self

http://youtu.be/oYlf1xFTHvs

Awesome! Name of the music? Please no Darude Sandstorm jokes  

[yellowduck2]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

People can use eSata with an eSata enclosure with multiple bays for cheaper. Most motherboards have eSata already, plus 8 to 12 Sata ports on board.

That disk enclosure is $135, you find me a 16 bay eSATA enclosure for less than $150 and I'll kiss your ass.
Then you find me a eSATA enclosure that you can connect 18 of to a single server.

Even if you get all that storage going, the time of plotting still would take long. At that rate, I would rather put 10 hdd's in a case, the get another rig plotting also and so fort. Plotting is dependent on cpu thread, memory and the efficiency of the data throughput of the system overall.

This is  where the fun comes in. If there were no plotting , i wonder what will happen to this coin. People can just buy HDD and mine at full speed. Right now , CPU plotting put a nice time gap.

[Razerglass]

For anyone who wants to get into mining seriously - quit thinking about SATA ports and USB enclosures and crap and start thinking real hardware.

http://unixsurplus.com/product/sgi-3u-media-server-storage-16-hd-bay-sas-sata-ssd-san-array-35-nas-jbod-good
less than $200, comes with 16 drive sleds and supports SATA disks.
All you need is a external SAS hba, which runs you less than a hundred bucks on ebay.

People can use eSata with an eSata enclosure with multiple bays for cheaper. Most motherboards have eSata already, plus 8 to 12 Sata ports on board.

That disk enclosure is $135, you find me a 16 bay eSATA enclosure for less than $150 and I'll kiss your ass.
Then you find me a eSATA enclosure that you can connect 18 of to a single server.

Even if you get all that storage going, the time of plotting still would take long. At that rate, I would rather put 10 hdd's in a case, the get another rig plotting also and so fort. Plotting is dependent on cpu thread, memory and the efficiency of the data throughput of the system overall.

This is  where the fun comes in. If there were no plotting , i wonder what will happen to this coin. People can just buy HDD and mine at full speed. Right now , CPU plotting put a nice time gap.

man my first terabyte when i relized how long it was taking..  i was so stressed out looking at the pile of harddrive i had to fill. thats when i turned on every computer in my house and had them all plotting to it and boom like clock work