Chris001
Sr. Member
Offline
Activity: 448
Merit: 250
electroneum.com
|
|
September 09, 2014, 09:03:51 PM |
|
I'm impressed that everything is going so well overall. It's working. Nice coin. I have put some BTC on this one. I would expect it to start going up as the markets get used to the multipools. That and people just noticing this coin. It has a lot going for it. I expect to see at least 2x soon.
|
https://bitcointalk.org/index.php?action=trust;u=186785Here is the link to my trust settings here on forum. This trust system is very unfair. I make good on every deal Ive ever made. I had many, many deals as you can see and I never scammed anyone. All it takes is a random account to give you negative trust and youre screwed. Tomatocage has never even talked to me ever but when the random acct hit me with negative trust, Tomatocage came right behind him and marked neg trust again so obviously he was the one who did it. You can look at Tomatocage trust and see how many of his compeditors at the currency exchange thread he labeled scammers. I never scammed anyone. My trust was green over 20 before this. I hope it never happens to you because the mods cant help you.
|
|
|
HoldTheLine
Member
Offline
Activity: 112
Merit: 10
|
|
September 09, 2014, 09:05:21 PM |
|
Can somebody tell me why I'm recieving around half the coins that I should be taking a high average of 3500TB network over 24 hours on the devs v2 pool?
Everyday its a good 2000 coins short. Been measuring the expected vs the actual payout for each 24 hour period.
Pretty poor, especially with the frequent drops into sub 2500TB territory.
Also - both miners now throw an occassional error of 'Error getting mining info from wallet' - literally nothing has changed in 5 days of otherwise correct mining.
|
|
|
|
coin1974
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 09, 2014, 09:06:02 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks.
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 09, 2014, 09:08:48 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are.
|
|
|
|
coin1974
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 09, 2014, 09:11:32 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are. Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place.
|
|
|
|
Razerglass
Legendary
Offline
Activity: 1036
Merit: 1000
https://bmy.guide
|
|
September 09, 2014, 09:13:36 PM |
|
Can somebody tell me why I'm recieving around half the coins that I should be taking a high average of 3500TB network over 24 hours on the devs v2 pool?
Everyday its a good 2000 coins short. Been measuring the expected vs the actual payout for each 24 hour period.
Pretty poor, especially with the frequent drops into sub 2500TB territory.
Also - both miners now throw an occassional error of 'Error getting mining info from wallet' - literally nothing has changed in 5 days of otherwise correct mining.
you me and everybody else
|
|
|
|
deevilknight
Jr. Member
Offline
Activity: 37
Merit: 10
|
|
September 09, 2014, 09:19:09 PM |
|
I only have 3 TB of storage, so I was looking to join a pool. I was following the instructions at http://burst-pool.cryptoport.io/howto.html and received the following error: {"errorCode":1,"errorDescription":"Incorrect request"} After reading through the comments I discovered that I need 1 burst coin before I can participate. Will someone please donate a coin to BURST-TV4P-7VAV-AUGA-293HV? Much thanks! Send you 2 burst just in case you need one more
|
|
|
|
MOB
|
|
September 09, 2014, 09:19:54 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are. Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place. Yes, please post whatever is working for you with a step by step to get it working. My 290X gets to "Building OpenCL Program" then I get a message that "GPUplotGenerator has stopped working." In windows 7 =/
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 09, 2014, 09:26:20 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are. Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place. The .bat file is the easy part. Make a new text document in whichever folder you have the plotgenerator.exe and name it whateveryouwant.bat. Inside, on the first line put gpuPlotGenerator "Path\to your\plots\folder" accountNumber startingNonce numberOfNonces staggerSize gpuThreads Then on the second line put An example would be gpuPlotGenerator "D:\poc_pool_v1\plots" 574389267984762893 1 11450000 1000 16 pause The .bat file says to run gpuPlotGenerator with these parameters and the "pause" says once it's stopped running, keep the window open until I close it. This is useful so you can see what errors pop up instead of it just closing immediately.
|
|
|
|
Avaahnaa
Member
Offline
Activity: 67
Merit: 10
|
|
September 09, 2014, 09:27:58 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are. Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place. The .bat file is the easy part. Make a new text document in whichever folder you have the plotgenerator.exe and name it whateveryouwant.bat. Inside, on the first line put gpuPlotGenerator "Path\to your\plots\folder" accountNumber startingNonce numberOfNonces staggerSize gpuThreads Then on the second line put An example would be gpuPlotGenerator "D:\poc_pool_v1\plots" 574389267984762893 1 11450000 1000 16 pause The .bat file says to run gpuPlotGenerator with these parameters and the "pause" says once it's stopped running, keep the window open until I close it. I totally read that as poo_pool
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 09, 2014, 09:29:18 PM |
|
Yes, please post whatever is working for you with a step by step to get it working.
My 290X gets to "Building OpenCL Program" then I get a message that "GPUplotGenerator has stopped working."
In windows 7 =/
I'm afraid I can't help you with this. Since it's not giving any error other than "it's broke" there's nothing to go on as to why it's broke. The only thing I can say is it seems that this is only working for people on Windows 8 .1 - but that's just what I've observed.
|
|
|
|
mirny
Legendary
Offline
Activity: 1108
Merit: 1005
|
|
September 09, 2014, 09:32:54 PM |
|
Hello, is this normal?When I start mining RAM start to massive overload, so now I can mine with just one 3TB HDD. I've tried Java 32,64, jre7, jdk1.8, xmx 500, 750, 1024, miners ofiicial, uray, but still with same result. Window7 64bit - 3TB HDD - 8 BG RAM - AMD X2 190 Can someone help? Thank you.
|
This is my signature...
|
|
|
Razerglass
Legendary
Offline
Activity: 1036
Merit: 1000
https://bmy.guide
|
|
September 09, 2014, 09:44:37 PM |
|
V2 Dev's Original pool
I have a 50GB PLOT that has made 1027 Burst today
And i have seperate wallet with 8TB worth of plots.. its made ( 2,000 burst today ) very interesting. what has gone wrong. this is the only day payments are throwed off. the last week ive been getting on the dot what calculator says i would get and i waited a entire week to get 500burst from 50gb... and now i have 1027 in the same day. lulz
just noticed page #420..
|
|
|
|
coin1974
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 09, 2014, 09:45:14 PM |
|
When is guide coming for gpu plotting? Its hard to wait When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks. You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are. Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place. The .bat file is the easy part. Make a new text document in whichever folder you have the plotgenerator.exe and name it whateveryouwant.bat. Inside, on the first line put gpuPlotGenerator "Path\to your\plots\folder" accountNumber startingNonce numberOfNonces staggerSize gpuThreads Then on the second line put An example would be gpuPlotGenerator "D:\poc_pool_v1\plots" 574389267984762893 1 11450000 1000 16 pause The .bat file says to run gpuPlotGenerator with these parameters and the "pause" says once it's stopped running, keep the window open until I close it. This is useful so you can see what errors pop up instead of it just closing immediately. Thanks a lot man. Its working now..
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 09, 2014, 09:57:48 PM |
|
Thanks a lot man. Its working now.. Cool! Happy to help.
|
|
|
|
wmikrut
|
|
September 09, 2014, 09:58:09 PM |
|
Hey everyone,
I received two coins from the faucet which is what helped me get started. I don't have much, but I would like to re-pay ten Burst to the faucet.
Before I do, I see there is a Deadline (24 Hours) field. Should I make any adjustments to this field before sending to the faucet?
|
I will NEVER ask for any kind of funds up front in a buy/sale of anything on bitcointalk.
BM-2cTFihJKmSwusMAoYuUHPvpx56Jozv64KK
|
|
|
coin1974
Newbie
Offline
Activity: 46
Merit: 0
|
|
September 09, 2014, 10:05:33 PM |
|
Thanks a lot man. Its working now.. Cool! Happy to help. One more question bro, hope you dont mind Is there any way yet i can plot with multi-gpus on a rig? or make involve two gpus with some device 0, device 1 types of setting inside batch file? Did you or anyone here try that option? Im just curious if that finds some solution for two graphic cards?
|
|
|
|
LivsUA
|
|
September 09, 2014, 10:08:16 PM |
|
Thanks a lot man. Its working now.. Cool! Happy to help. One more question bro, hope you dont mind Is there any way yet i can plot with multi-gpus on a rig? or make involve two gpus with some device 0, device 1 types of setting inside batch file? Did you or anyone here try that option? Im just curious if that finds some solution for two graphic cards? Dev of this program is working on that option now
|
|
|
|
mellorbo
|
|
September 09, 2014, 10:16:02 PM |
|
can anyone explain why 1tb hdd gets 1 payment from cryptoport of 250 where a 300gb got 5 payments plus 3000 burst 10 mins after setting up rewards in wallet. .... is pool broken
wow! whats your address? both for 1tb and 300gb 1 tb BURST-LPXH-LLSZ-MSC9-BNTNJ the 300 isnt mine its a m8 BURST-GDA6-2FGN-D6KD-D7VUS 3.5K is not from pool : http://burst.cryptoport.io/tx/17733463673204335285he had made another account and 5 mins or so got the 3k which he transfered there. but thats the 300gb 5 payments opoose to my 1 th 1 payment. follow the 3.5k u will see right uray it was me who set up the second account (using a friends hdd setting it up for him with his wallet which i also created) the address regtable posted is mine not the account in question. this is the transaction to account BURST-TS44-U5ZJ-5K8K-38RSG 9/7/2014 17:36:38 3'277.05727389 + 1 BURST-L28E-WSYC-F4N3-B82AC full hash: 30b3509a4dbd4eed4640f1b573dbc4bc190185ef77af6ac33f4441928816f87b it was the second payment from the pool with little hdd space used as i was still plotting for him. had it just been lucky or was there a mistake?
|
|
|
|
kcanup
Legendary
Offline
Activity: 1484
Merit: 1000
|
|
September 09, 2014, 10:17:06 PM |
|
Thanks a lot man. Its working now.. Cool! Happy to help. One more question bro, hope you dont mind Is there any way yet i can plot with multi-gpus on a rig? or make involve two gpus with some device 0, device 1 types of setting inside batch file? Did you or anyone here try that option? Im just curious if that finds some solution for two graphic cards? Dev of this program is working on that option now Thats cool. Thanks dude
|
|
|
|
|