[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[fanepatent]

v2 pool down? miner telling me it can't connect to wallet...

[tibolt]

what does it mean 0.0012941177% at v2 pool? lower or higher is good?

[omgbossis21]

So the easiest way to get back on track is redownload v1, regenerate plots and start again?

[jzhoulon]

i just get "no valid share to sumbit to pool"
then i get "Passphrase does not match recipient'

wait for 4 confirmations of your address assignment

ok im sumbitting shares but i am still getting "Passphrase does not match recipient'

my solo miner also report passphrase does not match recipient, i open the solo miner and not open the pool miner

[HunterS]

i just get "no valid share to sumbit to pool"
then i get "Passphrase does not match recipient'

wait for 4 confirmations of your address assignment

ok im sumbitting shares but i am still getting "Passphrase does not match recipient'

my solo miner also report passphrase does not match recipient, i open the solo miner and not open the pool miner

i am using pool miner.i just left passphrase txt file blank now.it looks like its working but not sure.it says that im submitting pool shares

[jzhoulon]

i just get "no valid share to sumbit to pool"
then i get "Passphrase does not match recipient'

wait for 4 confirmations of your address assignment

ok im sumbitting shares but i am still getting "Passphrase does not match recipient'

my solo miner also report passphrase does not match recipient, i open the solo miner and not open the pool miner

i am using pool miner.i just left passphrase txt file blank now.it looks like its working but not sure.it says that im submitting pool shares

just move the plots to pool miner's plots? i did just now, but reports no submit share

[jzhoulon]

i just get "no valid share to sumbit to pool"
then i get "Passphrase does not match recipient'

wait for 4 confirmations of your address assignment

ok im sumbitting shares but i am still getting "Passphrase does not match recipient'

my solo miner also report passphrase does not match recipient, i open the solo miner and not open the pool miner

i am using pool miner.i just left passphrase txt file blank now.it looks like its working but not sure.it says that im submitting pool shares

just move the plots to pool miner's plots? i did just now, but reports no submit share

ok, my fault, just wait a minute it reports shares

[timk225]

Download link to pocminer_pool?

[w00tcl]

burstcoin
I generated some of my disc space to id from pool v 1,the rest I began to generate for my solo ID, and went through all the steps in the instructions for the pool version 2. now part of my plots mine on the pool v 1,rest  (small part)on pool of v 2, but no payments at all! what i  need to do to return to the pool of version 1 and receive payments from there?
sorry for my english
thx

[familiaverde]

Ok i moved my plots to pocminer_pool but i still have 3 TB free space ... do i need to generate with pocminer and after the ploting finished i need to move them to pocminer_pool or is a way to generate directly the plots to pocminer_pool ??

[ArnMan]

I have a 3tb
is it better to have one big plot or a bunch of smaller ones?
also if I calculated correctly.

3tb = 3,000,000,000,000
 i believe
divided by
200,000,000,000
200gb i also believe
equals
15
times
800000
equals
12000000

is that correct on assuming for plot size for a 3tb?

Im sure this question has been answered in the some odd 218 pages somewhere

[burstcoin]

i just get "no valid share to sumbit to pool"
then i get "Passphrase does not match recipient'

wait for 4 confirmations of your address assignment

ok im sumbitting shares but i am still getting "Passphrase does not match recipient'

"Passphrase does not match recipient" is a wallet error if the miner is trying to solo mine. You can not have a passphrases.txt file in the pocminer_pool folder with the passphrase in it if you are trying to pool mine. Mover or rename your passphrases.txt

Ok i moved my plots to pocminer_pool but i still have 3 TB free space ... do i need to generate with pocminer and after the ploting finished i need to move them to pocminer_pool or is a way to generate directly the plots to pocminer_pool ??

You can generate with pocminer_pool the same way as with pocminer, but you'll have to change your .bat to have pocminer_pool in it. Alternativly, just copy pocminer.jar and your generate bat to the pocminer_pool folder

burstcoin
I generated some of my disc space to id from pool v 1,the rest I began to generate for my solo ID, and went through all the steps in the instructions for the pool version 2. now part of my plots mine on the pool v 1,rest  (small part)on pool of v 2, but no payments at all! what i  need to do to return to the pool of version 1 and receive payments from there?
sorry for my english
thx

Since the 2 pools have different ips, keep them in seperate folders. Run a pocminer_pool with the v1 pool ip with your v1 plots, and run a pocminer_pool with the v2 ip and your v2 plots.

[bathrobehero]

Can I generate a bunch of let's say 10GB plots on one machine and move some of them to other machines and mine like that? This was probably answered but this thread is massive.

[timk225]

ok guys im confused.it doesnt take much for me.lol.i have not done any pool mining yet.all my plots are solo.what do i need to do to mine v2 pool.

1. Download pocminer_pool
2. move your plots folder from pocminer_v1 to pocminer_pool
3. In the mine.bat file, edit the poolip to http://178.62.39.204:8121
4. Go to http://localhost:8125/rewardassignment.html
5. At the bottom fill in your passphrase, and put BURST-8NZ9-X6AX-72BK-2KFM2 as recipient and submit. This will have a fee of 1
6. After 4 confirms, your generate address will show up in http://178.62.39.204:8121/users
7. run mine.bat

I'm stuck on step 4.  "The page cannot be displayed".
WTF?

I just remembered the BURST wallet has to be open first.  What 'tard designed this POS system......

[w00tcl]

burstcoin
I generated some of my disc space to id from pool v 1,the rest I began to generate for my solo ID, and went through all the steps in the instructions for the pool version 2. now part of my plots mine on the pool v 1,rest  (small part)on pool of v 2, but no payments at all! what i  need to do to return to the pool of version 1 and receive payments from there?
sorry for my english
thx

Since the 2 pools have different ips, keep them in seperate folders. Run a pocminer_pool with the v1 pool ip with your v1 plots, and run a pocminer_pool with the v2 ip and your v2 plots.

i.e. rewardassignment.html not affect to payments from  pool  version 1?

[timk225]

Instead of trying to move my 600GB plot file to the pool miner folder, I removed all the files except the 600 GB plot file from the original solo miner folder, then Copy and Pasted the files from the pool miner folder into the folder with my 600 GB plot file already in it!  DAMN I'm good!!!!!

[AnonymousEconomist]

Hey guys. I still have no hits on the multi pool.

It looks like we may just have to settle for someone in our own community, if you guys have the skills.

The bounty is currently 65k BURST. Anyone want to throw down any more?

[burstcoin]

Can I generate a bunch of let's say 10GB plots on one machine and move some of them to other machines and mine like that? This was probably answered but this thread is massive.

Yes, that is fine.

I have a 3tb
is it better to have one big plot or a bunch of smaller ones?
also if I calculated correctly.

3tb = 3,000,000,000,000
 i believe
divided by
200,000,000,000
200gb i also believe
equals
15
times
800000
equals
12000000

is that correct on assuming for plot size for a 3tb?

Im sure this question has been answered in the some odd 218 pages somewhere

That is in the right ballpark. Might be a little high though due to filesystem and other overhead.

burstcoin
I generated some of my disc space to id from pool v 1,the rest I began to generate for my solo ID, and went through all the steps in the instructions for the pool version 2. now part of my plots mine on the pool v 1,rest  (small part)on pool of v 2, but no payments at all! what i  need to do to return to the pool of version 1 and receive payments from there?
sorry for my english
thx

Since the 2 pools have different ips, keep them in seperate folders. Run a pocminer_pool with the v1 pool ip with your v1 plots, and run a pocminer_pool with the v2 ip and your v2 plots.

i.e. rewardassignment.html not affect to payments from  pool  version 1?

pool v1 is not affected by this.

ok guys im confused.it doesnt take much for me.lol.i have not done any pool mining yet.all my plots are solo.what do i need to do to mine v2 pool.

1. Download pocminer_pool
2. move your plots folder from pocminer_v1 to pocminer_pool
3. In the mine.bat file, edit the poolip to http://178.62.39.204:8121
4. Go to http://localhost:8125/rewardassignment.html
5. At the bottom fill in your passphrase, and put BURST-8NZ9-X6AX-72BK-2KFM2 as recipient and submit. This will have a fee of 1
6. After 4 confirms, your generate address will show up in http://178.62.39.204:8121/users
7. run mine.bat

I'm stuck on step 4.  "The page cannot be displayed".
WTF?  Make sure the damn thing works before you go posting it here!!!

You are on client 1.0.3, right?

[timk225]

Yes I am on 1.0.3 .

[jzhoulon]

hi,burstcoin, i use the softlink to link the different plots together before and with solo miner , it works fine, and if i use the pool miner, can it still work with softlink?