[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[CryptoSurfer]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

[SpeedDemon13]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Simply put: f(x)=4096x
                f(x)=Plot Size
                   x=GB Size
 

[bitminer82]

yes i know, thank you
so what next ? i create plots and how can i start mine in pool than ?

Once you start creating plots you can start mining - even before it's finished. (It just reads what's been plotted so far.)

Download the pool miner (don't worry that is still says v1): https://mega.co.nz/#!7hwHQJLZ!-waC7CwWeMStkdAwjEVbew1fN_YqeZDRWMWfCylaNPo

Then follow these instructions: https://bitcointalk.org/index.php?topic=731923.msg8605325#msg8605325

so its not necessary open wallet or something ? there is like 3 or 4 "how to do" and its always diffrend im so confused

Sorry, I guess that wasn't enough.

You need to download the wallet and have it running to mine.  The link is in the OP - Burst_1.0.3.  Unzip that and run the bat file - no modification needed.  You'll see a command prompt up and running which will need to stay open as long as you want to mine.  The first time you launch it, it will have to download the blockchain which will take 10-20 mins.  Once it's running, go to http://localhost:8125 to see its status.

Then you can follow the steps above.  Sorry, it is really pretty complicated until you get used to it.  If it's generating plots and the wallet server (burst_1.0.3) is running, then you can follow those few steps I posted earlier to get mining on the pool.

[burst1002]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

thank you !!

one more question, i am having multiple computers, can i use the same account number (1007041384185016045 ) for all the computers? or do I have to download the wallet in different computers and generate new account for each for plotting ?

[bitminer82]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Thanks!  I found 1TB/256KB was close but I always had just a little bit extra.

[neite99]

@burstcoin

I saw your tweet to bittrex.  Have they contacted you?

[Razerglass]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

thank you !!

one more question, i am having multiple computers, can i use the same account number (1007041384185016045 ) for all the computers? or do I have to download the wallet in different computers and generate new account for each for plotting ?

i would like to know this too, can you run the same wallet on different computers, (harddrives here and there all combining hashrate)?

[AnonymousEconomist]

80 btc volume on CCEX.

Wow...

[burstcoin]

@burstcoin

I saw your tweet to bittrex.  Have they contacted you?

Not yet.

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

thank you !!

one more question, i am having multiple computers, can i use the same account number (1007041384185016045 ) for all the computers? or do I have to download the wallet in different computers and generate new account for each for plotting ?

i would like to know this too, can you run the same wallet on different computers, (harddrives here and there all combining hashrate)?

You can use the same address on different computers, just make sure you use a different nonce range.

[theprofileth]

Could someone please send me a few burst to my sig so I can get started mining please

[timk225]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Excuse me PLEASE!!!

But I read here a while back that any number we use has to be an even multiple of 8191, is that still correct?

For example, my 600 GB plot = 2457600, but when dividing by 8191 I found I needed to make it 2457300 to come out as an even multiple.

So if this is correct, don't forget to check the number by dividing it by 8191, and lower the big number until it comes out even, as in (some number).000 .

[Razerglass]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Excuse me PLEASE!!!

But I read here a while back that any number we use has to be an even multiple of 8191, is that still correct?

For example, my 600 GB plot = 2457600, but when dividing by 8191 I found I needed to make it 2457300 to come out as an even multiple.

So if this is correct, don't forget to check the number by dividing it by 8191, and lower the big number until it comes out even, as in (some number).000 .

never read that anywhere :0 hope i dont have to spend another 24 hours replotting

[neite99]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Excuse me PLEASE!!!

But I read here a while back that any number we use has to be an even multiple of 8191, is that still correct?

For example, my 600 GB plot = 2457600, but when dividing by 8191 I found I needed to make it 2457300 to come out as an even multiple.

So if this is correct, don't forget to check the number by dividing it by 8191, and lower the big number until it comes out even, as in (some number).000 .

never read that anywhere :0 hope i dont have to spend another 24 hours replotting

I did mine in groups of 4000 and 8000 (instead of 8192)

So mine were always even.

I have ~8 tb like that and I hit plenty of blocks before switching to the pool.

[IncludeBeer]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Excuse me PLEASE!!!

But I read here a while back that any number we use has to be an even multiple of 8191, is that still correct?

For example, my 600 GB plot = 2457600, but when dividing by 8191 I found I needed to make it 2457300 to come out as an even multiple.

So if this is correct, don't forget to check the number by dividing it by 8191, and lower the big number until it comes out even, as in (some number).000 .

never read that anywhere :0 hope i dont have to spend another 24 hours replotting

Actually, I think the meaning from that was this: whatever you choose for your plot stagger number (8192, 1000, 2000, etc), your ending plot range number should be a multiple of.  For example, for those who don't have enough RAM for 8192, using 1000 or 2000 means you can use any ending range number that is a multiple of 1000 (or 2000).

Edit: Source: README file in POCMiner - "The total amount of nonces should be a multiple of the stagger amount."

[Depredation]

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

Excuse me PLEASE!!!

But I read here a while back that any number we use has to be an even multiple of 8191, is that still correct?

For example, my 600 GB plot = 2457600, but when dividing by 8191 I found I needed to make it 2457300 to come out as an even multiple.

So if this is correct, don't forget to check the number by dividing it by 8191, and lower the big number until it comes out even, as in (some number).000 .

never read that anywhere :0 hope i dont have to spend another 24 hours replotting

I did mine in groups of 4000 and 8000 (instead of 8192)

So mine were always even.

I have ~8 tb like that and I hit plenty of blocks before switching to the pool.

I did mine in 5000; each of my plots were 250,000 plots big.

[Raxe.io]

@burstcoin

I saw your tweet to bittrex.  Have they contacted you?

Not yet.

Hello,

To generate plots, how to determine the plot value. I just gave the value as 824000 for 200 GB. Will this be enough. I also have a 1.5 Tb space, how much plot to allocate? pls help !!

C:\Windows\SysWOW64\java -Xmx1200m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 1007041384185016045 0 824000 500 5

Plot size is calculated as (tb*1024*1024*1024)/256 or (gb*1024*1024)/256.

thank you !!

one more question, i am having multiple computers, can i use the same account number (1007041384185016045 ) for all the computers? or do I have to download the wallet in different computers and generate new account for each for plotting ?

i would like to know this too, can you run the same wallet on different computers, (harddrives here and there all combining hashrate)?

You can use the same address on different computers, just make sure you use a different nonce range.

You should be proud of this project it is very refreshing. Congratulations for the true innovation.

[crowetic]

Could someone please send me a few burst to my sig so I can get started mining please

I got ya man. one sec.

[crowetic]

Could someone please send me a few burst to my sig so I can get started mining please

I got ya man. one sec.

sent ya 10, good luck!

[Depredation]

Someone just destroyed a 2 btc buy wall



2014-09-02 19:22:12   Sell   273369.80112995   2.41932274   0.00000885

[Razerglass]

so what happens to me i did mine in 400gb plots, 1-1800000 and 1800001-36000000   am I ok to mine or should i of done it differently