[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[tibolt]

you can't cut after 81m coins generated. how can you explain me after i sold 700k. i did my plans for 2b coin.  people buy, hold or sell. max coin amount defined at startup and shouldnt change.

Deve should cut total amount. 2 billion is too much. This coin si gonna ne big, if che cut the way to moon si guaranteed

[1714877653]

1714877653

[1714877653]

1714877653

[infazan]

пpoдaть - https://twitter.com/Anti_Pump/status/507071818315091969

like I said - the price is reduced

[SpeedDemon13]

Deve should cut total amount. 2 billion is too much. This coin si gonna ne big, if che cut the way to moon si guaranteed

For some people who can't read.

Block reward starts at 10,000/block, then decreases 5% each month (similar to halving every 14 months, but much smoother)

we are producing 3.6M a day per 420(14 months) = 1.5B coin, the mining will end in 660 days, basically there is no halving lmao

Thats not how the client does it.

   @Override
    public long getBlockReward() {
        if(this.height == 0 || this.height >= 1944000) {
                return 0;
        }
        int month = this.height / 10800;
        long reward = BigInteger.valueOf(10000)
                        .multiply(BigInteger.valueOf(95).pow(month))
                        .divide(BigInteger.valueOf(100).pow(month)).longValue() * Constants.ONE_NXT;
    
        return reward;
    }

From block 1944000 on we get no more reward, before that its 10000 * (floor(height / 10800)) ^ 0.95

mh, ok i didn't check that, 5% a month is still too low, is asking for dumping

2 billion isn't that bad, it helps with distribution and adoption a bit.

Honestly, if people are complaining about this, then make your own PoC coin out of the source code. Live with it or do something about it.

[burstcoin]

it's a bit strange. mining on v2 pool, having shares, but on curent user balance, shows nothing...

What account number?

10979493466573385217
switched early in morning from v1 to v2
switched 2 pcs and one is working fine and show the balance, but the second shows nothing

Did you update the ip in your bat file?

 java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocminer_pool.POCMiner mine http://127.0.0.1:8125 http://178.62.39.204:8121

this is mine.bat
in the last 8 minutes already submited more than 5 shares

on v1 made on that pc over 800 coins in 2 hours.
on v2 - made crap.. nothing... so i might go back to v1 if v2 has a bug

I don't know. I haven't had any bugs so far that didn't turn out to be user error, but I'm drawing a blank on this for now.

[SpeedDemon13]

пpoдaть - https://twitter.com/Anti_Pump/status/507071818315091969

like I said - the price is reduced

Please stop with the FUD. Really, your doing no justice to the project. Make your point, prove your point and give actual facts behind it, otherwise, please leave....

[Amph]

Deve should cut total amount. 2 billion is too much. This coin si gonna ne big, if che cut the way to moon si guaranteed

For some people who can't read.

Block reward starts at 10,000/block, then decreases 5% each month (similar to halving every 14 months, but much smoother)

we are producing 3.6M a day per 420(14 months) = 1.5B coin, the mining will end in 660 days, basically there is no halving lmao

Thats not how the client does it.

   @Override
    public long getBlockReward() {
        if(this.height == 0 || this.height >= 1944000) {
                return 0;
        }
        int month = this.height / 10800;
        long reward = BigInteger.valueOf(10000)
                        .multiply(BigInteger.valueOf(95).pow(month))
                        .divide(BigInteger.valueOf(100).pow(month)).longValue() * Constants.ONE_NXT;
    
        return reward;
    }

From block 1944000 on we get no more reward, before that its 10000 * (floor(height / 10800)) ^ 0.95

mh, ok i didn't check that, 5% a month is still too low, is asking for dumping

2 billion isn't that bad, it helps with distribution and adoption a bit.

Honestly, if people are complaining about this, then make your own PoC coin out of the source code. Live with it or do something about it.

clone of this will pop up soon, maybe written in c++, with a standard gui and everything

[SpeedDemon13]

Deve should cut total amount. 2 billion is too much. This coin si gonna ne big, if che cut the way to moon si guaranteed

For some people who can't read.

Block reward starts at 10,000/block, then decreases 5% each month (similar to halving every 14 months, but much smoother)

we are producing 3.6M a day per 420(14 months) = 1.5B coin, the mining will end in 660 days, basically there is no halving lmao

Thats not how the client does it.

   @Override
    public long getBlockReward() {
        if(this.height == 0 || this.height >= 1944000) {
                return 0;
        }
        int month = this.height / 10800;
        long reward = BigInteger.valueOf(10000)
                        .multiply(BigInteger.valueOf(95).pow(month))
                        .divide(BigInteger.valueOf(100).pow(month)).longValue() * Constants.ONE_NXT;
    
        return reward;
    }

From block 1944000 on we get no more reward, before that its 10000 * (floor(height / 10800)) ^ 0.95

mh, ok i didn't check that, 5% a month is still too low, is asking for dumping

2 billion isn't that bad, it helps with distribution and adoption a bit.

Honestly, if people are complaining about this, then make your own PoC coin out of the source code. Live with it or do something about it.

clone of this will pop up soon, maybe written in c++, with a standard gui and everything

Good, then people will stop complaining and go chase the greed train to hell.... The intent of this coin originally was to introduce a new mining technology, not satisfy peoples lustful greed....

[redsn0w]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

[SpeedDemon13]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

[fanepatent]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

You mean install mingw32 in windows to compile from linux

[zakorus]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c shabal.o -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

i love you!

[Tony Lane]

Hi Guys,

I have tried reading through the thread.
Sorry if it's been asked before but is there an OSX Poc Miner?

TL

[fanepatent]

Hi Guys,

I have tried reading through the thread.
Sorry if it's been asked before but is there an OSX Poc Miner?

TL

The miner is Java written so it will work in OSX as well.
You can use the run.sh file located in the archive

[redsn0w]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

You mean install mingw32 in windows to compile from linux

This is the error : https://i.imgur.com/bs6BD08.png   .  I'm very tired now xD .

[uray]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c shabal.o -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

its working for pool mining at http://burst-pool.cryptoport.io



but sometime it get segfault when  new block event, do you know why? but if i run inside gdb its ok, no problem at all, is it thread problem maybe?
source and bin is here https://s3-ap-southeast-1.amazonaws.com/burst-mirror/dcct-pool-miner.tgz

[SpeedDemon13]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

You mean install mingw32 in windows to compile from linux

My error, I was thinking it was for Windows. Guess dcct isn't going to compile a Windows version any time soon. lol

Gives me a reason to use my Ubuntu machine more now...

[fanepatent]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

You mean install mingw32 in windows to compile from linux

My error, I was thinking it was for Windows. Guess dcct isn't going to compile a Windows version any time soon. lol

Nope. He isn't.

[Sglasio]

Who can share windows miner ? i mean new best miner )))
i mean already compile )

[SpeedDemon13]

Yes , Any new info for the pocminer written in C and not in java ( java is very very slow   ) .

95% done, but usable if you add your passphrase to the code manually.
- a lot faster
- multithreaded
- multiple plot directories
- uses almost no memory
- for solo mining only (I guess)

http://pastebin.com/PrnGyg19

Go to line 101 and put your passphrase in. Remember to replace spaces with +
Then compile (gcc -o mine mine.c -lpthread)

When running always end the path's with /
so:

Code:

> ./mine 127.0.0.1 /mnt/disk1/plots/ /mnt/disk2/plots/ /mnt/disk3/plots/
2872 MB read/11488 GB total/deadline 13929s (13855s left)
New block 8144, basetarget 12214315
2872 MB read/11488 GB total/deadline 3537s (3166s left)
New block 8145, basetarget 12897708
2872 MB read/11488 GB total/deadline 12357s (12077s left)
New block 8146, basetarget 13253224
2872 MB read/11488 GB total/deadline 2202s (1944s left)
New block 8147, basetarget 13829153
2872 MB read/11488 GB total/deadline 2579s (1850s left)
New block 8148, basetarget 13957505
2872 MB read/11488 GB total/deadline 9786s (9643s left)
New block 8149, basetarget 13761067
2872 MB read/11488 GB total/deadline 17811s (17506s left)
New block 8150, basetarget 13768134
2872 MB read/11488 GB total/deadline 8542s (8407s left) 

Oh thanks , so now i must to compile it xD ...   Can you help me ?

You need to get mingw32 and install it in linux. Then use the command line: x86_64_mingw32-gcc -o mine mine.c -lpthread

I woud like to compile it to an Os windows , not linux .

I meant you need mingw32 for linux to compile for windows...lol

You mean install mingw32 in windows to compile from linux

My error, I was thinking it was for Windows. Guess dcct isn't going to compile a Windows version any time soon. lol

Nope. He isn't.

That's unfortunate, strange some people can only code/compile in one platform only. Don't get me wrong, I like/use Linux(Ubuntu), FreeBSD(FreeNAS) and Mac OSX(Mountain Lion), but Windows is more widely adopted to the masses.

[Sglasio]

if we use cygwin, we compile soft for masses.